Study of Viscoplasticity Models for the Impact Behavior of High-Strength Steels

This study reports on modeling the mechanical behavior of high-strength steels subjected to impact loading. The materials studied were steel grades of interest for crashworthiness applications: dual-phase and transformation induced plasticity (TRIP) steels. The challenges associated with the numerical simulation of impact events involving these materials include the modeling of extensive plastic deformation, particularly the change of material properties with strain rate. Tensile testing was performed at different strain rates on the materials studied. The test results were used to compare and validate constitutive equations that provide a mathematical description of strain-rate dependence of the material properties. The Cowper-Symonds equation and modified variants were examined. The crashworthiness performance of thin-walled sections made of dual-phase and TRIP steels was also investigated. Axial crushing tests were performed at different speeds on top-hat and hexagonal tubes. The experimental results were compared with numerical simulations obtained using an explicit finite element program (LS-DYNA) and the original and modified Cowper-Symonds equations.

[1]  T. Nicholas.  Tensile testing of materials at high rates of strain , 1981 .

[2]  W. Abramowicz,et al.  Dynamic axial crushing of square tubes , 1984 .

[3]  A. Otubushin,et al.  Detailed validation of a non-linear finite element code using dynamic axial crushing of a square tube , 1998 .

[4]  L. M. Yeakley,et al.  High strain-rate testing: Tension and compression , 1968 .

[5]  H. Kolsky.  An Investigation of the Mechanical Properties of Materials at very High Rates of Loading , 1949 .

[6]  J. D. Campbell,et al.  Tensile Testing of Materials at Impact Rates of Strain , 1960 .

[7]  Norman Jones,et al.  Experimental and numerical study in axial crushing of thin walled sections made of high-strength steels , 2003 .

[8]  Norman Jones,et al.  Measurement of Impact Loads using a Laser Doppler Velocimeter , 1990 .

[9]  Wolfgang Bleck,et al.  Determination of crash-relevant material parameters by dynamic tensile tests , 2000 .

[10]  Dimitrios E. Manolakos,et al.  Finite element simulation of the axial collapse of metallic thin-walled tubes with octagonal cross-section , 2003 .

[11]  Eizaburo Nakanishi,et al.  NEW MATERIALS TECHNOLOGY FOR ACHIEVING BOTH CRASHWORTHINESS AND WEIGHT REDUCTION USING ENERGY-ABSORBING STEEL WITH HIGHER STRAIN-RATE SENSITIVITY , 1998 .

[12]  Norman Jones.  Determination of Crash-Relevant Material Properties of Dual-Phase and Trip Steels , 2003 .

[13]  Mark White,et al.  Experimental study into the energy absorbing characteristics of top-hat and double-hat sections subjected to dynamic axial crushing , 1999 .

[14]  F. Hauser,et al.  Techniques for measuring stress-strain relations at high strain rates , 1966 .

[15]  T. Hira,et al.  High Strain Rate Deformation of High Strength Sheet Steels for Automotive Parts , 1998 .

[16]  Hoon Huh,et al.  A tension split Hopkinson bar for investigating the dynamic behavior of sheet metals , 2002 .

[17]  C. Y. Wang,et al.  Validity of one-dimensional experimental principle for flat specimen in bar–bar tensile impact apparatus , 2000 .