Development and Laboratory Evaluation of an Online Controlling Algorithm for Precision Tillage

Soil compaction management relies on costly annual deep tillage. Variable-depth tillage or site-specific tillage modifies the physical properties of the soil at the required zones for the growth of crops. In this study, a depth control system was designed for the subsoiler of the tillage at various depths. For this purpose, an algorithm was written to investigate the subsoiler location and soil compaction. A program was also developed to implement this algorithm using Kinco Builder Software to control the subsoiler depth, which was evaluated on the experimental platform. In this study, four compression sensors were used at a distance of 10 cm up to a depth of 40 cm on the blade mounted at the front of the tractor. The data of these sensors were used as the input and compared with the pressure baseline limit (2.07 MPa), and with the priority to select the greater depth, the depth of subsoiler was determined. At all three modes of sensor activation (single, collective, and combined), this system was able to operate the hydraulic system of the tractor and place the subsoiler at the desired depth through the use of the position sensors.

[1]  Young J. Han,et al.  Variable-depth Tillage based on Geo-referenced Soil Compaction Data in Coastal Plain Soils , 2011 .

[2]  Young J. Han,et al.  Real-Time, Variable-Depth Tillage for Managing Soil Compaction in Cotton Production , 2018 .

[3]  Sun-Ok Chung,et al.  Soil Bin and Field Tests of an On-The-Go Soil Strength Profile Sensor , 2008 .

[4]  Yousef Abbaspour‐Gilandeh.  On-the-go soil mechanical strength measurement at different soil depths , 2009 .

[5]  I. Khomeini,et al.  Study of the Effective Parameters of an On-the-go Single Blade Soil Mechanical Resistance Measurement System , 2011 .

[6]  R. L. Raper,et al.  DEVELOPMENT AND CONCEPT EVALUATION OF AN ON-THE-GO SOIL STRENGTH MEASUREMENT SYSTEM , 2005 .

[7]  E. B. Schwab,et al.  Measurement and Variation of Site-specific Hardpans , 2001 .

[8]  Aylton J. Alves,et al.  Intelligent system for measuring soil compaction on croplands , 2015, 2015 IEEE 15th International Conference on Environment and Electrical Engineering (EEEIC).

[9]  Yousef Abbaspour-Gilandeh,et al.  A field comparison of two prototype sensors for horizontally on-the-go soil mechanical resistance measurement , 2012 .

[10]  G. E. Miles,et al.  Energy Requirement for Subsoiling Coastal Plain Soils , 1987 .

[11]  G Spoor,et al.  Subsoil compaction: risk, avoidance, identification and alleviation , 2003 .

[12]  Roy B. Dodd,et al.  AN ALGORITHM TO DETERMINE THE OPTIMUM TILLAGE DEPTH FROM SOIL PENETROMETER DATA IN COASTAL PLAIN SOILS , 2006 .

[13]  J. Fielke,et al.  Soil translocation by narrow openers with various rake angles , 2012 .

[14]  Viacheslav I. Adamchuk,et al.  APPLICATION OF A STRAIN GAUGE ARRAY TO ESTIMATE SOIL MECHANICAL IMPEDANCE ON–THE–GO , 2001 .

[15]  Wouter Saeys,et al.  An Automatic Depth Control System for Online Measurement of Spatial Variation in Soil Compaction, Part 1: Sensor Design for Measurement of Frame Height Variation from Soil Surface , 2004 .