Effects of seat structural dynamics on current ride comfort criteria

The ISO 2631-1 (1997) provides methodologies for assessment of the seated human body comfort in response to vibrations. The standard covers various conditions such as frequency content, direction and location of the transmission of the vibration to the human body. However, the effects of seat structural dynamics mode shapes and corresponding resonances have not been discussed. This study provides important knowledge about the effects of vehicle seat structural vibration modes on discomfort assessment. The occupied seat resonant frequencies and corresponding vibration modes were measured and comfort test was carried out based on the paired comparison test method. The results show that the ISO 2631-1 (1997) method significantly underestimates the vibration discomfort level around the occupied seat twisting resonant frequencies. This underestimation is mainly due to the ISO suggested location of the accelerometer pad on the seatback. The centre of the seatback is a nodal point at the seat twisting mode. Therefore, it underestimates the total vibration transferred to the occupant body from the seatback. Practitioner Summary: The effects of the vehicle seat structural dynamics have not been discussed in the human body vibration ISO . The results of this research show that the current measurement method suggested by ISO 2631-1 (1997) can significantly underestimate the vibration discomfort level at around the seat structural vibration mode.

[1]  Jin-Kwan Suh,et al.  A Study on the Characteristics of Vibration in Seat System , 2003 .

[2]  Setsuo Maeda,et al.  Effects of seat-back angle and accelerometer height at the seat-back on seat-back x axis r.m.s. acceleration in filed experiments according to the ISO2631-1 standard. , 2004, Industrial health.

[3]  Hikaru Inooka,et al.  Identification of the head-neck complex in response to trunk horizontal vibration , 2004, Biological Cybernetics.

[4]  S R Holmes,et al.  The influence of seat backrest angle on perceived discomfort during exposure to vertical whole-body vibration , 2012, Ergonomics.

[5]  Salam Rahmatalla,et al.  Predictive discomfort of non-neutral head–neck postures in fore–aft whole-body vibration , 2011, Ergonomics.

[6]  Michael J. Griffin,et al.  The transmission of vertical vibration through seats: Influence of the characteristics of the human body , 2011 .

[7]  Mohammad Fard,et al.  Structural dynamic characterization of a vehicle seat coupled with human occupant , 2013 .

[8]  Bazil Basri,et al.  Equivalent comfort contours for vertical seat vibration: effect of vibration magnitude and backrest inclination , 2012, Ergonomics.

[9]  Michael J. Griffin,et al.  Handbook of Human Vibration , 1990 .

[10]  David J. Ewins,et al.  Modal Testing: Theory, Practice, And Application , 2000 .

[11]  Michael J. Griffin,et al.  Transmission of fore–aft vibration to a car seat using field tests and laboratory simulation , 2003 .

[12]  Kazuma Nakai,et al.  Experimental Modal Analysis of Human Body with the Spinal Column , 2007 .

[13]  Nagesh Voderahobli Karanth,et al.  An Investigation of Vibration Characteristics in Automotive Seats Using Experimental and CAE Techniques , 2011 .

[14]  Robert J. Doolan,et al.  Comparison of Seat System Resonant Frequency Testing Methods , 1995 .

[15]  M J Griffin,et al.  Qualitative models of seat discomfort including static and dynamic factors , 2000, Ergonomics.

[16]  Jack D. Leatherwood Human discomfort response to noise combined with vertical vibration , 1979 .

[17]  Hikaru Inooka,et al.  Dynamics of the head-neck complex in response to the trunk horizontal vibration: modeling and identification. , 2003, Journal of biomechanical engineering.

[18]  H. Van der Auweraer Structural dynamics modeling using modal analysis: applications, trends and challenges , 2001, IMTC 2001.

[19]  Neil J Mansfield,et al.  Relative contribution of translational and rotational vibration to discomfort. , 2010, Industrial health.

[20]  Mohammad Fard Structural dynamics characterization of the vehicle seat for NVH performance analysis , 2011 .

[21]  Selim S. Hacιsalihzade Modeling and Identification , 2013 .