Ammonium sulfide vapor passivation of In0.53Ga0.47As and InP surfaces

The efficiency of the ammonium sulfide vapor (ASV) treatment, as opposed to the wet treatment in the liquid ammonium sulfide solution, on the performance improvement of the In0.53Ga0.47As surface-channel as well as InP-capped buried-channel metal-oxide-semiconductor field-effect-transistors (MOSFET) was demonstrated for the first time. MOSFETs were fabricated with either HCl or ASV surface treatments prior to the gate oxide deposition. ASV treatment was found to be very efficient in boosting the drive current of the transistors compared to that of the HCl treatment. It was also found that the ASV treatment leads to a lower border trap density and slightly higher oxide/semiconductor interface defect density compared to that of the HCl treatment. X-ray photoelectron spectroscopy (XPS) studies of In0.53Ga0.47As native oxide regrowth after both surface treatments identified indium sub-oxides as a possible cause of the performance degradation of the HCl treated devices. Based on this work, ASV treatment could ...