New hot-carrier degradation mode and lifetime prediction method in quarter-micrometer PMOSFET
暂无分享,去创建一个
[1] Gary S. May,et al. Design guidelines for deep-submicrometer MOSFETs , 1988, Technical Digest., International Electron Devices Meeting.
[2] T. Tsuchiya,et al. Relationship between hot-electrons/Holes and degradation of p- and n-channel MOSFET's , 1985, IEEE Electron Device Letters.
[3] E. Takeda,et al. Role of hot-hole injection in hot-carrier effects and the small degraded channel region in MOSFET's , 1983, IEEE Electron Device Letters.
[4] F. Lau,et al. Hot-carrier drifts in submicrometer p-channel MOSFET's , 1987, IEEE Electron Device Letters.
[5] Patrick M. Lenahan,et al. Hole traps and trivalent silicon centers in metal/oxide/silicon devices , 1984 .
[6] Drain avalanche hot hole injection mode on PMOSFETs , 1988, Technical Digest., International Electron Devices Meeting.
[7] G. Taylor,et al. Effects of hot-carrier trapping in n- and p-channel MOSFET's , 1983, IEEE Transactions on Electron Devices.
[8] Kenji Maeguchi,et al. Impact of hot electron trapping on half micron PMOSFETs with p + poly Si gate , 1986 .
[9] G. Groeseneken,et al. Analysis of the charge pumping technique and its application for the evaluation of MOSFET degradation , 1989 .
[10] M. Koyanagi,et al. Investigation and reduction of hot electron induced punchthrough (HEIP) effect in submicron PMOSFETs , 1986, 1986 International Electron Devices Meeting.
[11] M. Miyake,et al. Subquarter-micrometer gate-length p-channel and n-channel MOSFETs with extremely shallow source-drain junctions , 1989 .