Error analysis of DEM derived from airborne single-pass interferometric SAR data

The main objective of this paper is to examine and evaluate the performance of the airborne SAR system through interferometric processing and error analysis. Firstly, the paper describes how high-precision DEMs are derived from the airborne dual-antenna InSAR data. Based on airborne dual-antenna InSAR bore-sight model, this paper summarizes the main factors which influence the accuracy of DEM in data processing, and analyses the error of those factors. Then, the POS/AV510 system parameters are used for analyzing the quantitative relationship between the platform height, baseline length, baseline angle, look angle and DEM error. The experimental data used is airborne dual-antenna X-band InSAR data, and the measured GCPs are used to validate the accuracy of DEM. Evaluation results in terms of the standard deviation (SD) and the average mean error (AME) are derived by comparing the reconstructed InSAR DEM with the reference GCPs. The AME of the DEM is up to 1.7628 m. The SD of the DEM are up to±1.0858 m.

[1]  Lars M. H. Ulander,et al.  On the optimization of interferometric SAR for topographic mapping , 1993, IEEE Trans. Geosci. Remote. Sens..

[2]  L. C. Graham,et al.  Synthetic interferometer radar for topographic mapping , 1974 .

[3]  Howard A. Zebker,et al.  Mapping the world's topography using radar interferometry: the TOPSAT mission , 1994, Proc. IEEE.

[4]  Xiaopeng Li,et al.  ACCURACY OF AIRBORNE IFSAR MAPPING , 2002 .

[5]  João R. Moreira,et al.  Generation of high precision DEMs of the Wadden Sea with airborne interferometric SAR , 2000, IEEE Trans. Geosci. Remote. Sens..

[6]  Giovanni Alberti,et al.  The TOPSAR interferometric radar topographic mapping instrument , 1992, IEEE Trans. Geosci. Remote. Sens..

[7]  Sun Long,et al.  Perfermance analysis and data processing of the airborne X-band insar system , 2007, 2007 1st Asian and Pacific Conference on Synthetic Aperture Radar.

[8]  R. Goldstein,et al.  Topographic mapping from interferometric synthetic aperture radar observations , 1986 .

[9]  Mario Costantini,et al.  A novel phase unwrapping method based on network programming , 1998, IEEE Trans. Geosci. Remote. Sens..

[10]  Søren Nørvang Madsen,et al.  Topographic mapping using radar interferometry: processing techniques , 1993, IEEE Trans. Geosci. Remote. Sens..

[11]  A. Roth,et al.  The shuttle radar topography mission—a new class of digital elevation models acquired by spaceborne radar , 2003 .

[12]  M. Rombach,et al.  Description and applications of the multipolarized dual band OrbiSAR-1 InSAR sensor , 2003, 2003 Proceedings of the International Conference on Radar (IEEE Cat. No.03EX695).

[13]  Xiang Maosheng,et al.  Introduction on an experimental airborne InSAR system , 2005, Proceedings. 2005 IEEE International Geoscience and Remote Sensing Symposium, 2005. IGARSS '05..

[14]  C. Werner,et al.  Radar interferogram filtering for geophysical applications , 1998 .