Exploiting Spatial Degrees of Freedom for High Data Rate Ultrasound Communication with Implantable Devices

We propose and demonstrate an ultrasonic communication link using spatial degrees of freedom to increase data rates for deeply implantable medical devices. Low attenuation and millimeter wavelengths make ultrasound an ideal communication medium for miniaturized low-power implants. While a small spectral bandwidth has drastically limited achievable data rates in conventional ultrasonic implants, a large spatial bandwidth can be exploited by using multiple transducers in a multiple-input/multiple-output system to provide spatial multiplexing gain without additional power, larger bandwidth, or complicated packaging. We experimentally verify the communication link in mineral oil with a transmitter and a receiver 5 cm apart, each housing two custom-designed mm-sized piezoelectric transducers operating at the same frequency. Two streams of data modulated with quadrature phase-shift keying at 125 kbps are simultaneously transmitted and received on both channels, effectively doubling the data rate to 250 kbps wit...

[1]  Thomas H. Lee,et al.  The Design of CMOS Radio-Frequency Integrated Circuits: RF CIRCUITS THROUGH THE AGES , 2003 .

[2]  Shantanu Chakrabartty,et al.  Multiaccess In Vivo Biotelemetry Using Sonomicrometry and M-Scan Ultrasound Imaging , 2018, IEEE Transactions on Biomedical Engineering.

[3]  L. Nelson,et al.  Space-division multiplexing in optical fibres , 2013, Nature Photonics.

[4]  Geir E. Øien,et al.  Design of Optimal High-Rank Line-of-Sight MIMO Channels , 2007, IEEE Transactions on Wireless Communications.

[5]  K. Boone,et al.  Effect of skin impedance on image quality and variability in electrical impedance tomography: a model study , 1996, Medical and Biological Engineering and Computing.

[6]  Joseph M. Kahn,et al.  Capacity limits of spatially multiplexed free-space communication , 2015 .

[7]  T. Tenderenda,et al.  Hole-assisted multicore optical fiber for next generation telecom transmission systems , 2014 .

[8]  Amin Arbabian,et al.  Design of Tunable Ultrasonic Receivers for Efficient Powering of Implantable Medical Devices with Reconfigurable Power Loads. , 2016, IEEE transactions on ultrasonics, ferroelectrics, and frequency control.

[9]  Chiara Buratti,et al.  A Survey on Wireless Body Area Networks: Technologies and Design Challenges , 2014, IEEE Communications Surveys & Tutorials.

[10]  Helmut Bölcskei,et al.  Outdoor MIMO wireless channels: models and performance prediction , 2002, IEEE Trans. Commun..

[11]  Haksue Lee,et al.  A micro-machined piezoelectric flexural-mode hydrophone with air backing: benefit of air backing for enhancing sensitivity. , 2010, The Journal of the Acoustical Society of America.

[12]  Bin He,et al.  Quantitative prediction of radio frequency induced local heating derived from measured magnetic field maps in magnetic resonance imaging: A phantom validation at 7 T. , 2014, Applied physics letters.

[13]  Amin Arbabian,et al.  Sound Technologies, Sound Bodies: Medical Implants with Ultrasonic Links , 2016, IEEE Microwave Magazine.

[14]  Andrea J. Goldsmith,et al.  Capacity limits of MIMO channels , 2003, IEEE J. Sel. Areas Commun..

[15]  Alper Erturk,et al.  Ultrasonic power transfer from a spherical acoustic wave source to a free-free piezoelectric receiver: Modeling and experiment , 2015 .

[16]  Amin Arbabian,et al.  A mm-Sized Implantable Medical Device (IMD) With Ultrasonic Power Transfer and a Hybrid Bi-Directional Data Link , 2015, IEEE Journal of Solid-State Circuits.