Review of model predictive control strategies for matrix converters

Matrix converters are a well-known class of direct AC-AC power converter topologies that can be used in applications, where compact volume and low weight are necessary. For good performance, special attention should be paid to the control scheme used for these converters. The model predictive control strategy is a promising, straightforward and flexible choice for controlling various different matrix converter topologies. This work provides a comprehensive study and detailed classification of several predictive control methods and techniques, discussing special capabilities they each add to the operation and control scheme for different matrix converter topologies. This study also considers the issues regarding the implementation of model predictive control strategies for matrix converters. This survey and comparison are intended to be a useful guide for solving the related drawbacks of each topology and to enable the application of this control scheme for matrix converters in practical applications.

[1]  Johann W. Kolar,et al.  A Review of Control and Modulation Methods for Matrix Converters , 2012, IEEE Transactions on Industrial Electronics.

[2]  Mario Marchesoni,et al.  Speed Finite Control Set Model Predictive Control of a PMSM Fed by Matrix Converter , 2015, IEEE Transactions on Industrial Electronics.

[3]  Hong-Hee Lee,et al.  A New SVM Method for an Indirect Matrix Converter With Common-Mode Voltage Reduction , 2014, IEEE Transactions on Industrial Informatics.

[4]  A. Alesina,et al.  Analysis and design of optimum-amplitude nine-switch direct AC-AC converters , 1989 .

[5]  Marco Rivera,et al.  A Computationally Efficient Lookup Table Based FCS-MPC for PMSM Drives Fed by Matrix Converters , 2017, IEEE Transactions on Industrial Electronics.

[6]  Mojtaba Alizadeh,et al.  Modified predictive control for both normal and LVRT operations of a Quasi-Z-Source Matrix Converter based WECS , 2017 .

[7]  Marco Rivera,et al.  Methods of source current reference generation for predictive control in a direct matrix converter , 2013 .

[8]  Raul Gregor,et al.  Predictive-space vector PWM current control method for asymmetrical dual three-phase induction motor drives , 2010 .

[9]  Davood Arab Khaburi,et al.  An Experimental Evaluation of Predictive Current Control and Predictive Torque Control for a PMSM Fed by a Matrix Converter , 2017, IEEE Transactions on Industrial Electronics.

[10]  Jose Rodriguez,et al.  Simplified Finite Control Set-Model Predictive Control for Matrix Converter-Fed PMSM Drives , 2018, IEEE Transactions on Power Electronics.

[11]  José R. Espinoza,et al.  A Comparative Assessment of Model Predictive Current Control and Space Vector Modulation in a Direct Matrix Converter , 2013, IEEE Transactions on Industrial Electronics.

[12]  Bin Wu,et al.  Current Control for an Indirect Matrix Converter With Filter Resonance Mitigation , 2012, IEEE Transactions on Industrial Electronics.

[13]  Patrick Wheeler,et al.  Predictive Torque Control of an Induction Machine Fed by a Matrix Converter With Reactive Input Power Control , 2010, IEEE Transactions on Power Electronics.

[14]  J Monteiro,et al.  Matrix Converter-Based Unified Power-Flow Controllers: Advanced Direct Power Control Method , 2011, IEEE Transactions on Power Delivery.

[15]  C. Klumpner,et al.  Implementation of a hybrid AC/AC direct power converter with unity voltage transfer ratio , 2006, Twenty-First Annual IEEE Applied Power Electronics Conference and Exposition, 2006. APEC '06..

[16]  Francisco Jurado,et al.  Control of indirect matrix converter with bidirectional output stage for micro-turbine , 2012 .

[17]  U. Ammann,et al.  Predictive Approach to Increase Efficiency and Reduce Switching Losses on Matrix Converters , 2009, IEEE Transactions on Power Electronics.

[18]  Johann W. Kolar,et al.  Review of Three-Phase PWM AC–AC Converter Topologies , 2011, IEEE Transactions on Industrial Electronics.

[19]  Jordi Espina,et al.  Predictive direct torque control of matrix converter fed permanent magnet synchronous machines , 2014 .

[20]  Saad Mekhilef,et al.  Experimental evaluation of model predictive current control for a modified three-level four-leg indirect matrix converter , 2018 .

[21]  Jian Yang,et al.  A Predictive-Control-Based Over-Modulation Method for Conventional Matrix Converters , 2018, IEEE Transactions on Power Electronics.

[22]  Bin Wu,et al.  Predictive Current Control With Input Filter Resonance Mitigation for a Direct Matrix Converter , 2011, IEEE Transactions on Power Electronics.

[23]  Johann W. Kolar,et al.  Technological Issues and Industrial Application of Matrix Converters: A Review , 2013, IEEE Transactions on Industrial Electronics.

[24]  José R. Rodríguez,et al.  Predictive Current Control With Instantaneous Reactive Power Minimization for a Four-Leg Indirect Matrix Converter , 2017, IEEE Transactions on Industrial Electronics.

[25]  Mei Su,et al.  Error-voltage based open-switch fault diagnosis strategy for matrix converters with model predictive control method , 2016, 2016 IEEE Energy Conversion Congress and Exposition (ECCE).

[26]  Kui Wang,et al.  An Optimal Full Frequency Control Strategy for the Modular Multilevel Matrix Converter Based on Predictive Control , 2018, IEEE Transactions on Power Electronics.

[27]  José R. Espinoza,et al.  Instantaneous Reactive Power Minimization and Current Control for an Indirect Matrix Converter Under a Distorted AC Supply , 2012, IEEE Transactions on Industrial Informatics.

[28]  Yupeng Liu,et al.  Real-time implementation of finite control set model predictive control for matrix converter based solid state transformer , 2017 .

[29]  Enrico Santi,et al.  FPGA-Based Model Predictive Controller for Direct Matrix Converter , 2016, IEEE Transactions on Industrial Electronics.

[30]  Cesar Silva,et al.  Delay Compensation in Model Predictive Current Control of a Three-Phase Inverter , 2012, IEEE Transactions on Industrial Electronics.

[31]  Jon C. Clare,et al.  Development of a Predictive Controller for Use on a Direct Converter for High-Energy Physics Applications , 2008, IEEE Transactions on Industrial Electronics.

[32]  Jian Yang,et al.  Open-Switch Fault Diagnosis and Fault Tolerant for Matrix Converter With Finite Control Set-Model Predictive Control , 2016, IEEE Transactions on Industrial Electronics.

[33]  José R. Espinoza,et al.  Multiobjective Switching State Selector for Finite-States Model Predictive Control Based on Fuzzy Decision Making in a Matrix Converter , 2013, IEEE Transactions on Industrial Electronics.

[34]  Yang Yang,et al.  Predictive Power Control of Matrix Converter With Active Damping Function , 2016, IEEE Transactions on Industrial Electronics.

[35]  Hong-Hee Lee,et al.  Input Power Factor Compensation Algorithms Using a New Direct-SVM Method for Matrix Converter , 2011, IEEE Transactions on Industrial Electronics.

[36]  José R. Espinoza,et al.  Control of a Matrix Converter With Imposed Sinusoidal Source Currents , 2012, IEEE Transactions on Industrial Electronics.

[37]  Johann W. Kolar,et al.  Predictive Control of an Indirect Matrix Converter , 2008, IEEE Transactions on Industrial Electronics.

[38]  Kui Wang,et al.  Optimized Branch Current Control of Modular Multilevel Matrix Converters Under Branch Fault Conditions , 2018, IEEE Transactions on Power Electronics.

[39]  Tao Peng,et al.  Preselection algorithm based on predictive control for direct matrix converter , 2017 .

[40]  T. Friedli,et al.  Imposed Sinusoidal Source and Load Currents for an Indirect Matrix Converter , 2012, IEEE Transactions on Industrial Electronics.

[41]  Athanasios N. Safacas,et al.  Open-Circuit Fault Diagnosis for Matrix Converter Drives and Remedial Operation Using Carrier-Based Modulation Methods , 2014, IEEE Transactions on Industrial Electronics.

[42]  José R. Rodríguez,et al.  Predictive Current Control of an Induction Machine Fed by a Matrix Converter With Reactive Power Control , 2008, IEEE Transactions on Industrial Electronics.

[43]  Mostafa Mosa,et al.  Model Predictive Control of a Capacitorless Matrix Converter-Based STATCOM , 2017, IEEE Journal of Emerging and Selected Topics in Power Electronics.

[44]  Mojtaba Alizadeh,et al.  Small-signal stability analysis, and predictive control of Z-Source Matrix Converter feeding a PMSG-WECS , 2018 .

[45]  José R. Espinoza,et al.  A Novel Hybrid Finite Control Set Model Predictive Control Scheme With Reduced Switching , 2013, IEEE Transactions on Industrial Electronics.

[46]  Marco Rivera,et al.  Predictive Control of an Induction Machine Fed by a Matrix Converter With Increased Efficiency and Reduced Common-Mode Voltage , 2014, IEEE Transactions on Energy Conversion.