The simulation of front keyhole wall dynamics during laser welding

A physical model of keyhole support and propagation during high-translation-speed laser welding is described. A numerical code for the simulation of the front keyhole wall behaviour is developed on the basis of a `hydrodynamic' physical model assuming that: (i) only the front part of the keyhole wall is exposed to the high-intensity laser beam; and (ii) recoil pressure exceeds surface tension and propagation of the keyhole wall inside the sample is due to melt expulsion similar to that in laser drilling. The front keyhole wall profile, distribution of absorbed laser intensity and phase velocity of the solid/liquid (liquid/vapour) boundary are calculated for various processing parameters. The calculations show that, depending on the processing conditions, the absolute value of the keyhole wall velocity component parallel to the translation velocity vector can be higher than, smaller than or equal to the beam translation speed. When the component of the keyhole velocity vector parallel to the sample surface was higher than the beam translation speed, the formation of the humps on the keyhole wall was observed numerically.

[1]  V. V. Semak,et al.  Melt pool dynamics during laser welding , 1995 .

[2]  Helmut Huegel,et al.  Aspects of keyhole/melt interaction in high-speed laser welding , 1991, International Symposium on High Power Laser Systems and Applications.

[3]  Pablo Solana,et al.  A study of the effect of multiple reflections on the shape of the keyhole in the laser processing of materials , 1997 .

[4]  P. Klemens.  Heat balance and flow conditions for electron beam and laser welding , 1976 .

[5]  A. Kaplan.  A MODEL OF DEEP PENETRATION LASER WELDING BASED ON CALCULATION OF THE KEYHOLE PROFILE , 1994 .

[6]  V. V. Semak,et al.  A concept for a hydrodynamic model of keyhole formation and support during laser welding , 1994 .

[7]  Martin Vicanek,et al.  Oscillations of the keyhole in penetration laser beam welding , 1994 .

[8]  M. Vicanek,et al.  Dynamic behaviour of the keyhole in laser welding , 1993 .

[9]  Phiroze Kapadia,et al.  A mathematical investigation of the penetration depth in keyhole welding with continuous CO2 lasers , 1995 .

[10]  A. Matsunawa,et al.  The role of recoil pressure in energy balance during laser materials processing , 1997 .

[11]  G. Simon,et al.  Towards a self-consistent model of the keyhole in penetration laser beam welding , 1993 .

[12]  M S McGough,et al.  VISUAL MONITORING OF REMOTE WELDING OPERATIONS , 1990 .

[13]  John Dowden,et al.  Theory of the oscillations of an ellipsoidal weld pool in laser welding , 1991 .

[14]  Phiroze Kapadia,et al.  A keyhole model in penetration welding with a laser , 1987 .

[15]  D. D. Malyuta,et al.  Dynamics of splashing of molten metals during irradiation with single CO2 laser pulses , 1988 .