Quantitative analysis of biological effect on membrane fouling in submerged membrane bioreactor.

The objective of this study is to investigate solids concentration and extracellular polymeric substance (EPS) effects on the membrane fouling in the submerged membrane bioreactor. The relationship between the solids retention time (SRT) and the amount of EPS is observed in three lab-scale MBRs. Additionally, the EPS effect on membrane fouling is quantified by calculating the specific cake resistance (alpha) using an unstirred batch cell test. By observing the sludge over a long period under various SRT scenarios, a wide range of EPS and membrane fouling data is obtained. These observations provide sufficient evidence of the functional relationship between SRT, EPS and alpha. As SRT decreases, the amount of EPS bound in sludge floc becomes higher in the high MLSS condition (> 5,000 mg/L). The amount of EPS in the sludge floc has positive influence on alpha. A sigmoid trend between EPS and alpha is observed and the functional relationship obtained by dimensional analysis is consistent with the experimental results.

[1]  Lianfa Song.  Flux decline in crossflow microfiltration and ultrafiltration: mechanisms and modeling of membrane fouling , 1998 .

[2]  M. Jaffrin,et al.  Reversibility of fouling formed in activated sludge filtration , 1999 .

[3]  Chung‐Hak Lee,et al.  Comparison of the filtration characteristics between attached and suspended growth microorganisms in submerged membrane bioreactor. , 2001, Water research.

[4]  T Higuchi,et al.  A model for membrane bioreactor process based on the concept of formation and degradation of soluble microbial products. , 2001, Water research.

[5]  S. Yamanishi,et al.  Modeling of biofouling by extracellular polymers in a membrane separation activated sludge system , 1998 .

[6]  Michel Y. Jaffrin,et al.  Contribution of various constituents of activated sludge to membrane bioreactor fouling , 2000 .

[7]  J. Lester,et al.  Extraction of extracellular polymers from activated sludge , 1983, Biotechnology Letters.

[8]  R. Schneider,et al.  Fouling of a microfiltration membrane by two Gram-negative bacteria , 1993 .

[9]  B. Rittmann,et al.  A unified theory for extracellular polymeric substances, soluble microbial products, and active and inert biomass. , 2002, Water research.

[10]  In-Soung Chang,et al.  Membrane filtration characteristics in membrane-coupled activated sludge system -- the effect of physiological states of activated sludge on membrane fouling , 1998 .

[11]  Kazuo Yamamoto,et al.  Direct Solid-Liquid Separation Using Hollow Fiber Membrane in an Activated Sludge Aeration Tank , 1989 .

[12]  E. Buckingham.  On Physically Similar Systems; Illustrations of the Use of Dimensional Equations , 1914 .

[13]  Kyu-Hong Ahn,et al.  Application of tubular ceramic membranes for reuse of wastewater from buildings , 1998 .

[14]  Hang-Sik Shin,et al.  Sludge characteristics and their contribution to microfiltration in submerged membrane bioreactors , 2003 .

[15]  R. Schneider,et al.  Cake resistance and solute rejection in bacterial microfiltration: The role of the extracellular matrix , 1993 .

[16]  Pierre Côté,et al.  Immersed membrane activated sludge for the reuse of municipal wastewater , 1997 .

[17]  Y. Magara,et al.  The Effect of Operational Factors on Solid/Liquid Separation by Ultra-Membrane Filtration in a Biological Denitrification System for Collected Human Excreta Treatment Plants , 1991 .