Experimental investigation of performance reliability of macro fiber composite for piezoelectric energy harvesting applications

Abstract Macro fiber composite (MFC) has been extensively used in actuator/sensor/harvester applications. Fatigue due to cyclic high electric fields in actuator applications has been studied extensively. However, fatigue failure of MFC due to high stress or strains in energy harvesting applications has attracted little attention. The aim of the study is to obtain the upper limit of dynamic strain on MFC which can be used as failure limit in the design process of piezoelectric energy harvesters (PEHs). The examined PEH is comprised of a cantilever beam made of aluminum and a patch of MFC bonded at its root for power generation. Energy harvesting tests are conducted at various base accelerations around 30 Hz (near resonant frequency) and the voltage output and maximum strain on MFC are measured. Severe loss in the performance of the harvester is observed within half million cycles of testing at high strain amplitude. Hence several reliability tests for extended periods of time are carried out at various strain amplitudes. The harvesters are tested at resonant frequencies around 30 Hz and 135 Hz for over 20 million and 60 million cycles, respectively. Degradation in voltage output, change in natural frequency and formation of cracks are considered as failures. Based on the experimental results, an upper limit of 600 μϵ is proposed as the safe amplitude of strain for reliable performance of MFC. Tensile tests are also carried out on MFC patches to understand the formation of cracks and shift in resonant frequency at low strains. It is observed that cracks are formed in MFC at strains as low as 1000 μϵ. The observations from this work are also applicable to MFC bending actuators undergoing cyclic strains.

[1]  Alperen Toprak,et al.  Piezoelectric energy harvesting: State-of-the-art and challenges , 2014 .

[2]  Hong Wang,et al.  Fatigue response of a PZT multilayer actuator under high-field electric cycling with mechanical preload , 2009 .

[3]  Yaowen Yang,et al.  Toward Broadband Vibration-based Energy Harvesting , 2010 .

[4]  Ann Marie Sastry,et al.  Powering MEMS portable devices—a review of non-regenerative and regenerative power supply systems with special emphasis on piezoelectric energy harvesting systems , 2008 .

[5]  Daniel J. Inman,et al.  Estimation of Electric Charge Output for Piezoelectric Energy Harvesting , 2004 .

[6]  Muhammad R. Hajj,et al.  Global nonlinear distributed-parameter model of parametrically excited piezoelectric energy harvesters , 2012 .

[7]  Pavel M. Chaplya,et al.  Durability properties of piezoelectric stack actuators under combined electromechanical loading , 2006 .

[8]  Shankar Mall,et al.  Electromechanical fatigue behavior of graphite/epoxy laminate embedded with piezoelectric actuator , 1999 .

[9]  Daniel J. Inman,et al.  Nonlinear nonconservative behavior and modeling of piezoelectric energy harvesters including proof mass effects , 2012 .

[10]  A. P. Vassilopoulos.  Fatigue Life Prediction of Composites and Composite Structures , 2010 .

[11]  A. Arockiarajan,et al.  Electrical fatigue behaviour in lead zirconate titanate: an experimental and theoretical study , 2013 .

[12]  Hong Wang,et al.  Piezoelectric and dielectric performance of poled lead zirconate titanate subjected to electric cyclic fatigue , 2012 .

[13]  Haim Abramovich,et al.  Fully reversed electromechanical fatigue behavior of composite laminate with embedded piezoelectric actuator/sensor , 2003 .

[14]  R. B. Williams,et al.  Nonlinear Tensile and Shear Behavior of Macro Fiber Composite Actuators , 2004 .

[15]  Daniel J. Inman,et al.  Strength analysis of piezoceramic materials for structural considerations in energy harvesting for UAVs , 2010, Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring.

[16]  Daniel J. Inman,et al.  Control of a Space Rigidizable Inflatable Boom Using Macro-fiber Composite Actuators , 2007 .

[17]  Yaowen Yang,et al.  Material strength consideration in the design optimization of nonlinear energy harvester , 2015 .

[18]  J. Rödel,et al.  Fatigue In Bulk Lead Zirconate Titanate Actuator Materials , 2005 .

[19]  Daniel J. Inman,et al.  A Distributed Parameter Electromechanical Model for Cantilevered Piezoelectric Energy Harvesters , 2008 .

[20]  W. Wilkie,et al.  Reliability Testing of NASA Piezocomposite Actuators , 2002 .

[21]  Ephrahim Garcia,et al.  The Power and Efficiency Limits of Piezoelectric Energy Harvesting , 2014 .

[22]  Amr M. Baz,et al.  Experimental implementation of a cantilevered piezoelectric energy harvester with a dynamic magnifier , 2011, Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring.

[23]  C. Farrar,et al.  Health Monitoring of UAV Wing Skin-to-spar Joints using Guided Waves and Macro Fiber Composite Transducers , 2007 .

[24]  Theo Fett,et al.  Nonsymmetry in the deformation behaviour of PZT , 1998 .

[25]  Muhammad R. Hajj,et al.  Modeling, validation, and performance of low-frequency piezoelectric energy harvesters , 2014 .