Nonlinear dynamic analysis of a parallel mechanism with consideration of joint effects

[1]  Yung Ting,et al.  Modeling and control for a Gough-Stewart platform CNC machine , 2004, IEEE International Conference on Robotics and Automation, 2004. Proceedings. ICRA '04. 2004.

[2]  T. Shiau,et al.  Direct kinematic analysis of a 3-PRS parallel mechanism , 2003 .

[3]  Arend L. Schwab,et al.  A comparison of revolute joint clearance models in the dynamic analysis of rigid and elastic mechanical systems , 2002 .

[4]  Olivier A. Bauchau,et al.  Modeling of joints with clearance in flexible multibody systems , 2001 .

[5]  Clément Gosselin,et al.  Kinematic Analysis and Optimization of a New Three Degree-of-Freedom Spatial Parallel Manipulator , 2000 .

[6]  K. S. Smith,et al.  Parallel Kinematic Machines , 1999 .

[7]  Bhaskar Dasgupta,et al.  Closed-Form Dynamic Equations of the General Stewart Platform through the Newton–Euler Approach , 1998 .

[8]  Jack Hollingum,et al.  Hexapods to take over , 1997 .

[9]  Natarajan Shankar,et al.  Milling machine for the 21st century: goals, approach, characterization, and modeling , 1996, Smart Structures.

[10]  Bhaskar Dasgupta,et al.  A canonical formulation of the direct position kinematics problem for a general 6-6 stewart platform , 1994 .

[11]  P. Bailey,et al.  The merits of hexapods for robotic applications , 1994 .

[12]  Horn-Sen Tzou,et al.  Dynamic characteristics evaluation of elastically jointed structures through stochastic simulation , 1992 .

[13]  H. S. Tzou,et al.  Contact dynamics of a spherical joint and a jointed truss-cell system , 1991 .

[14]  Tzong-Shi Liu,et al.  Dynamic analysis of flexible linkages with lubricated joints , 1990 .

[15]  Clément Gosselin,et al.  Stiffness mapping for parallel manipulators , 1990, IEEE Trans. Robotics Autom..

[16]  Kenneth J. Waldron,et al.  Kinematics of a Hybrid Series-Parallel Manipulation System , 1989 .

[17]  E F Fichter,et al.  A Stewart Platform- Based Manipulator: General Theory and Practical Construction , 1986 .

[18]  G. G. Lowen,et al.  The elastic behavior of linkages: An update , 1986 .

[19]  E. Haug,et al.  Dynamics of mechanical systems with Coulomb friction, stiction, impact and constraint addition-deletion—I theory , 1986 .

[20]  R. S. Haines.  An experimental investigation into the dynamic behaviour of revolute joints with varying degrees of clearance , 1985 .

[21]  Steven Dubowsky,et al.  On the Dynamic Analysis and Behavior of Industrial Robotic Manipulators With Elastic Members , 1983 .

[22]  R. S Haines,et al.  Survey: 2-dimensional motion and impact at revolute joints , 1980 .

[23]  K. H. Hunt,et al.  Kinematic geometry of mechanisms , 1978 .

[24]  Steven Dubowsky,et al.  An experimental and analytical study of impact forces in elastic mechanical systems with clearances , 1978 .

[25]  Steven Dubowsky,et al.  Dynamic Interactions of Link Elasticity and Clearance Connections in Planar Mechanical Systems , 1975 .

[26]  Ferdinand Freudenstein,et al.  Dynamic Analysis of Mechanical Systems With Clearances—Part 1: Formation of Dynamic Model , 1971 .