Development and experimental analysis of a hybrid cooling concept for electric vehicle battery packs

[1]  Martin Agelin-Chaab,et al.  Experimental investigation of a novel hybrid cooling method for lithium-ion batteries , 2018 .

[2]  Martin Agelin-Chaab,et al.  Analysis of Cooling Effectiveness and Temperature Uniformity in a Battery Pack for Cylindrical Batteries , 2017 .

[3]  Ibrahim Dincer,et al.  Thermal design and simulation of mini-channel cold plate for water cooled large sized prismatic lithium-ion battery , 2017 .

[4]  Fan He,et al.  Reduced-order thermal modeling of liquid-cooled lithium-ion battery pack for EVs and HEVs , 2017, 2017 IEEE Transportation Electrification Conference and Expo (ITEC).

[5]  Róbert Turza,et al.  Experimental Measurements of the Water Evaporation Rate of a Physical Model , 2017 .

[6]  Yanbao Ma,et al.  Prevent thermal runaway of lithium-ion batteries with minichannel cooling , 2017 .

[7]  Wen Tong Chong,et al.  Computational fluid dynamic and thermal analysis of Lithium-ion battery pack with air cooling , 2016 .

[8]  Yanbao Ma,et al.  Thermal management for high power lithium-ion battery by minichannel aluminum tubes , 2016 .

[9]  A. Mujumdar,et al.  Thermo-electrochemical model for forced convection air cooling of a lithium-ion battery module , 2016 .

[10]  Yves Dube,et al.  A comprehensive review of lithium-ion batteries used in hybrid and electric vehicles at cold temperatures , 2016 .

[11]  N. L. Pierrès,et al.  AN INNOVATIVE COOLING SYSTEM BASED ON EVAPORATION FROM A POROUS TANK , 2016 .

[12]  Jiateng Zhao,et al.  Thermal performance of mini-channel liquid cooled cylinder based battery thermal management for cylindrical lithium-ion power battery , 2015 .

[13]  Zhengguo Zhang,et al.  A hybrid thermal management system for lithium ion batteries combining phase change materials with forced-air cooling , 2015 .

[14]  Roydon Andrew Fraser,et al.  Thermal Management of Lithium-Ion Pouch Cell with Indirect Liquid Cooling using Dual Cold Plates Approach , 2015 .

[15]  Xiongwen Zhang,et al.  Assessment of the forced air-cooling performance for cylindrical lithium-ion battery packs: A comparative analysis between aligned and staggered cell arrangements , 2015 .

[16]  Olivier C.L. Haas,et al.  Fan-pad evaporative battery cooling for hybrid electric vehicle thermal management , 2015 .

[17]  Hongguang Sun,et al.  Development of cooling strategy for an air cooled lithium-ion battery pack , 2014 .

[18]  Tomi Laurila,et al.  Heat generation in high power prismatic Li‐ion battery cell with LiMnNiCoO2 cathode material , 2014 .

[19]  Hassan Fathabadi,et al.  High thermal performance lithium-ion battery pack including hybrid active–passive thermal management system for using in hybrid/electric vehicles , 2014 .

[20]  Jun Zhang,et al.  Shortcut computation for the thermal management of a large air-cooled battery pack , 2014 .

[21]  Jianqiu Li,et al.  Analysis of the heat generation of lithium-ion battery during charging and discharging considering different influencing factors , 2014, Journal of Thermal Analysis and Calorimetry.

[22]  Heesung Park,et al.  A design of air flow configuration for cooling lithium ion battery in hybrid electric vehicles , 2013 .

[23]  A. Pesaran,et al.  A parametric study on thermal management of an air-cooled lithium-ion battery module for plug-in hybrid electric vehicles , 2013 .

[24]  A. Mujumdar,et al.  A novel flow reversal concept for improved thermal management in polymer electrolyte fuel cell stacks , 2012 .

[25]  Zhonghao Rao,et al.  A review of power battery thermal energy management , 2011 .

[26]  R. Mahamud,et al.  Reciprocating air flow for Li-ion battery thermal management to improve temperature uniformity , 2011 .

[27]  R. Kurose,et al.  Experimental study on effect of relative humidity on heat transfer of an evaporating water droplet in air flow , 2010 .

[28]  Said Al-Hallaj,et al.  An alternative cooling system to enhance the safety of Li-ion battery packs , 2009 .

[29]  Chaoyang Wang,et al.  Power and thermal characterization of a lithium-ion battery pack for hybrid-electric vehicles , 2006 .

[30]  Chaoyang Wang,et al.  Thermal‐Electrochemical Modeling of Battery Systems , 2000 .

[31]  Robert J. Moffat,et al.  Describing the Uncertainties in Experimental Results , 1988 .

[32]  J. Philip,et al.  The Theory of Infiltration , 1958 .

[33]  J. Philip,et al.  THE THEORY OF INFILTRATION: 4. SORPTIVITY AND ALGEBRAIC INFILTRATION EQUATIONS , 1957 .