Comparison between bulk and particle solder alloy on the performance of low-melting solder joints

[1]  Y. Liu,et al.  Growth Behavior and Reliability of Interfacial Imc for Sn58bi/Cu and Sn58bi-Aln/Cu Solder Joints Applied in Igbt Modules , 2022, SSRN Electronic Journal.

[2]  H. Nishikawa,et al.  Behavior of Sn-3.0Ag-0.5Cu Solder/Cu Fluxless Soldering via Sn Steaming under Formic Acid Atmosphere , 2022, Journal of Materials Research and Technology.

[3]  V. K. Bupesh Raja,et al.  Microstructure, mechanical properties and corrosion analysis of Sn–0.7Cu + Ga solders joints developed using green concentrated solar energy soldering method , 2021, Journal of Materials Science: Materials in Electronics.

[4]  Tongmin Wang,et al.  Effects of Ni on the nucleation and growth behavior of Cu6Sn5 in Sn–8.5Cu alloy: An in situ observation , 2021 .

[5]  Yulong Li,et al.  Interfacial reaction and shear strength of ultrasonically-assisted Sn-Ag-Cu solder joint using composite flux , 2021 .

[6]  Sang Hun Lee,et al.  Synthesis, Properties, and Biological Applications of Metallic Alloy Nanoparticles , 2020, International journal of molecular sciences.

[7]  Jianhao Wang,et al.  New challenges of miniaturization of electronic devices: Electromigration and thermomigration in lead-free solder joints , 2020 .

[8]  Guanyi Chen,et al.  Effect of micromorphology on corrosion and mechanical properties of SAC305 lead-free solders , 2020 .

[9]  Pushkaraj D. Sonawane,et al.  Microstructure, Mechanical, and Electrical Properties and Corrosion Analysis of Lead-Free Solder CSI Joints on Cu Substrate Using Novel Concentrated Solar Energy Soldering (CSES) Method , 2020 .

[10]  Hongjun Ji,et al.  Ultrasonic-accelerated metallurgical reaction of Sn/Ni composite solder: Principle, kinetics, microstructure, and joint properties. , 2020, Ultrasonics sonochemistry.

[11]  Xiaowu Hu,et al.  The effects of Ni addition on microstructure evolution and mechanical properties of solder joints undergoing solid-liquid electromigration , 2019 .

[12]  Xiaowu Hu,et al.  Effect of Cu additions on mechanical properties of Ni3Sn4-based intermetallic compounds: First-principles calculations and nano-indentation measurements , 2019, Vacuum.

[13]  Yulong Li,et al.  Influences of Mono-Ni(P) and Dual-Cu/Ni(P) Plating on the Interfacial Microstructure Evolution of Solder Joints , 2018, Metallurgical and Materials Transactions A.

[14]  Maria D. Marquez,et al.  Bimetallic Nanoparticles: Enhanced Magnetic and Optical Properties for Emerging Biological Applications , 2018, Applied Sciences.

[15]  Mingyu Li,et al.  Ultra-low temperature sintering of Cu@Ag core-shell nanoparticle paste by ultrasonic in air for high-temperature power device packaging. , 2018, Ultrasonics sonochemistry.

[16]  K. Fezzaa,et al.  Ultrafast synchrotron X-ray imaging studies of microstructure fragmentation in solidification under ultrasound , 2018 .

[17]  D. Eskin,et al.  A synchrotron X-radiography study of the fragmentation and refinement of primary intermetallic particles in an Al-35Cu alloy induced by ultrasonic melt processing , 2017 .

[18]  D. Eskin,et al.  In situ observation of ultrasonic cavitation-induced fragmentation of the primary crystals formed in Al alloys. , 2017, Ultrasonics sonochemistry.

[19]  A. Simchi,et al.  Effect of alumina nanoparticles on the microstructure and mechanical durability of meltspun lead-free solders based on tin alloys , 2016 .

[20]  H. Ipser,et al.  Investigation of interfacial behavior in miniaturized solder interconnects , 2016 .

[21]  Mingyu Li,et al.  Effects of Ag content on the interfacial reactions between liquid Sn–Ag–Cu solders and Cu substrates during soldering , 2016 .

[22]  I. Sevostianov,et al.  Copper–graphite composites: thermal expansion, thermal and electrical conductivities, and cross-property connections , 2016, Journal of Materials Science.

[23]  Chunqing Wang,et al.  Ultrarapid formation of homogeneous Cu6Sn5 and Cu3Sn intermetallic compound joints at room temperature using ultrasonic waves. , 2014, Ultrasonics sonochemistry.

[24]  Chunqing Wang,et al.  Effects of ultrasonic irradiation and cooling rate on the solidification microstructure of Sn–3.0Ag–0.5Cu alloy , 2014 .

[25]  Jaeboong Choi,et al.  Impact reliability estimation of lead free solder joint with IMC layer , 2009 .

[26]  A. Cobo,et al.  Evolution of morphologic properties on the preparation of Ir/Al , 2005 .

[27]  S. L. Ngoh,et al.  Intermetallic growth studies on Sn-Ag-Cu lead-free solder joints , 2004 .

[28]  S. Fujiuchi,et al.  Interface Reaction and Mechanical Properties of Lead-free Sn-Zn Alloy/Cu Joints , 2002 .

[29]  Kojiro F. Kobayashi,et al.  Mechanical Strength and Microstructure of BGA Joints Using Lead-Free Solders , 2002 .

[30]  K. Tu,et al.  Six cases of reliability study of Pb-free solder joints in electronic packaging technology , 2002 .

[31]  K. Tu,et al.  Tin–lead (SnPb) solder reaction in flip chip technology , 2001 .

[32]  Katsuaki Suganuma,et al.  Heat resistance of Sn-9Zn solder/Cu interface with or without coating , 2000 .