Mesoscale modeling of water penetration into concrete by capillary absorption

Abstract Water penetration into concrete by capillary absorption plays a very important role in the ingress of contaminative substances when the structures are built in aggressive environments. In the present paper the lattice network model is proposed based on the unsaturated flow theory to predict the water penetration into concrete. On the mesocale level, concrete is treated as a three-phase composite. By means of the Voronoi diagram meshing strategy, the lattice network model of concrete with different types of lattice elements is developed. The corresponding transport properties are assigned to the lattice elements in the network falling in different phases. As a result, the lattice elements are idealized as conductive “pipes” in which uni-directional flow can be realized between the two nodes of the elements. Parameters in the lattice network model, such as the sorptivity and porosity of the mortar and the ITZs are quantitatively determined. With help of the approach, the water content distribution within a concrete sample after any elapsed time, especially the penetration depth of water frontier, can be easily predicted. The cumulative water absorption calculated by the lattice network model is shown to be well agreed with the experimental results.

[1]  B. Oh,et al.  PREDICTION OF DIFFUSIVITY OF CONCRETE BASED ON SIMPLE ANALYTIC EQUATIONS , 2004 .

[2]  Nicos Martys,et al.  Capillary transport in mortars and concrete , 1997 .

[3]  Mathias J. M. Römkens,et al.  Wetting Front Analysis of the Nonlinear Diffusion Equation , 1984 .

[4]  R. Vitaliani,et al.  Analysis of Chloride Diffusion into Partially Saturated Concrete , 1993 .

[5]  F. H. Wittmann,et al.  Einfluss kombinierter Umweltbelastungen auf die Beständigkeit von Stahlbetontragwerken / Influence of Combined Environmental Loads on Durability of Reinforced Concrete Structures , 2006 .

[6]  J.G.M. van Mier,et al.  Meso-level analysis of moisture flow in cement composites using a lattice-type approach , 1997 .

[7]  Peter Grassl,et al.  A lattice approach to model flow in cracked concrete , 2008, 0809.2758.

[8]  Kohei Nagai,et al.  Mesoscopic Simulation of Failure of Mortar and Concrete by 2D RBSM , 2004 .

[9]  Peter Grassl,et al.  Mesoscale Approach to Modeling Concrete Subjected to Thermomechanical Loading , 2010 .

[10]  Stefano Berton,et al.  Simulation of shrinkage induced cracking in cement composite overlays , 2004 .

[11]  C. C. Yang,et al.  Effect of the interfacial transition zone on the transport and the elastic properties of mortar , 2003 .

[12]  Hong Hao,et al.  Mesoscale modelling of concrete tensile failure mechanism at high strain rates , 2008 .

[13]  Michèle Queneudec,et al.  Estimation of the capillary transport coefficient of Clayey Aerated Concrete using a gravimetric technique , 2000 .

[14]  Minoru Kunieda,et al.  Time-Dependent Structural Analysis Considering Mass Transfer to Evaluate Deterioration Process of RC Structures , 2006 .

[15]  John E. Bolander,et al.  Modeling crack development in reinforced concrete structures under service loading , 1999 .

[16]  Christopher Hall,et al.  Anomalous diffusion in unsaturated flow: Fact or fiction? , 2007 .

[17]  Z. M. Wang,et al.  Mesoscopic study of concrete I: generation of random aggregate structure and finite element mesh , 1999 .

[18]  Christopher Hall,et al.  Effect of non-sorptive inclusions on capillary absorption by a porous material , 1993 .

[19]  Peter F. Dux,et al.  Unsaturated diffusivity functions for concrete derived from NMR images , 2003 .

[20]  Edward J. Garboczi,et al.  Effect of the Interfacial Transition Zone on the Conductivity of Portland Cement Mortars , 2004 .

[21]  J. Parlange,et al.  Anomalous water absorption in porous materials , 2003 .

[22]  M. O'Farrell,et al.  A water sorptivity test for martar and concrete , 1998 .

[23]  Torben C. Hansen,et al.  Physical structure of hardened cement paste. A classical approach , 1986 .

[24]  Li Cheng Wang.  Analytical Methods for Prediction of Water Absorption in Cement-Based Material , 2009 .

[25]  L. Hanžič,et al.  Relationship between liquid sorptivity and capillarity in concrete , 2003 .

[26]  Narayanan Neithalath,et al.  Analysis of Moisture Transport in Mortars and Concrete Using Sorption-Diffusion Approach , 2006 .

[27]  C. Hall,et al.  Water sorptivity of mortars and concretes: a review , 1989 .

[28]  Edward J. Garboczi,et al.  Multiscale Analytical/Numerical Theory of the Diffusivity of Concrete , 1998 .

[29]  Tamon Ueda,et al.  Simulation of Chloride Diffusivity for Cracked Concrete Based on RBSM and Truss Network Model , 2008 .

[30]  W. Jason Weiss,et al.  Water Transport in Concrete Damaged by Tensile Loading and Freeze–Thaw Cycling , 2006 .

[31]  F. H. Wittmann,et al.  Simulation of crack propagation and failure of concrete , 1981 .

[32]  E. Hervé,et al.  Application of a n-Phase Model to the Diffusion Coefficient of Chloride in Mortar , 2004 .

[33]  Peter F. Dux,et al.  Sorptivity and the estimation of water penetration into unsaturated concrete , 1999 .

[34]  P. Lunk.  Kapillares Eindringen von Wasser und Salzlösungen in Beton / Penetration of Water and Salt Solutions into Concrete by Capillary Suction , 1998 .

[35]  William John McCarter,et al.  Absorption of water and chloride into concrete , 1992 .

[36]  W. D. Hoff,et al.  Capillary water migration in rock: process and material properties examined by NMR imaging , 1993 .