Perspectives of carbon nanotubes/polymer nanocomposites for wind blade materials

The global market for wind energy has increased exponentially in the past few decades, and there is a continuous effort to develop cost-effective materials with higher strength to mass ratio for wind blades. With unique structural and transport properties, carbon nanotubes (CNTs) have attracted much interest as the reinforcement to develop polymer-based nanocomposites delivering exceptional mechanical properties and multi-functional characteristics. In light of previous and current status in carbon-based materials, herein the suitabilities of CNT/polymer nanocomposites for wind blade materials are analyzed. Special emphasis is placed on the mechanical, fatigue, electrical, thermal and barrier properties of CNT/polymer nanocomposites, which are important considerations when selecting suitable materials for wind blades with larger rotary radius. The application of CNT/polymer nanocomposites as sensory materials for the monitoring of defects in composite structures is also discussed. Finally, based on the progress made so far, some suggestions paving the way for the large commercialization of these nanocomposites for wind blades are presented.

[1]  A. Movaghghar,et al.  A Method of Estimating Wind Turbine Blade Fatigue Life and Damage using Continuum Damage Mechanics , 2012 .

[2]  Jing Li,et al.  Effects of surfactant treatment on mechanical and electrical properties of CNT/epoxy nanocomposites , 2008 .

[3]  Á. Sáfrány,et al.  Mechanical and barrier properties of carbon nanotube reinforced PCL-based composite films: Effect of gamma radiation , 2013 .

[4]  K. Schulte,et al.  Can carbon nanotubes be used to sense damage in composites , 2004 .

[5]  K. Schulte,et al.  Improvement of fatigue life by incorporation of nanoparticles in glass fibre reinforced epoxy , 2010 .

[6]  Jie Zhang,et al.  Glass Fibers with Carbon Nanotube Networks as Multifunctional Sensors , 2010 .

[7]  P. Ajayan,et al.  Nanocomposite Science And Technology , 2003 .

[8]  N. A. Siddiqui,et al.  DISPERSION AND FUNCTIONALIZATION OF CARBON NANOTUBES FOR POLYMER-BASED NANOCOMPOSITES: A REVIEW , 2010 .

[9]  Jang‐Kyo Kim,et al.  Strain-sensitive Raman spectroscopy and electrical resistance of carbon nanotube-coated glass fibre sensors , 2012 .

[10]  N. A. Siddiqui,et al.  Glass fibers with clay nanocomposite coating: Improved barrier resistance in alkaline environment , 2011 .

[11]  R. Young,et al.  Experimental studies on the interfacial shear-transfer mechanism in discontinuous glass-fibre composites , 2000 .

[12]  Peng-Cheng Ma,et al.  Development of functional glass fibres with nanocomposite coating: A comparative study , 2013 .

[13]  R. C. Picu,et al.  Suppression of fatigue crack growth in carbon nanotube composites , 2007 .

[14]  S. Hong,et al.  Enhanced electrical conductivity of nanocomposites containing hybrid fillers of carbon nanotubes and carbon black. , 2009, ACS applied materials & interfaces.

[15]  Yu-Lung Lo,et al.  Highly sensitive optical fiber oxygen sensor using Pt(II) complex embedded in sol-gel matrices , 2006 .

[16]  T. Chou,et al.  Advances in the science and technology of carbon nanotubes and their composites: a review , 2001 .

[17]  A. Lystrup,et al.  Composite Materials for Wind Power Turbine Blades , 2005, Renewable Energy.

[18]  B. Harris.  Engineering composite materials , 1986 .

[19]  M. G. Bader.  Handbook of composite reinforcements , 1994 .

[20]  Peter Schwartz,et al.  Monitoring bending fatigue in carbon-fibre/epoxy composite strands: a comparison between mechanical and resistance techniques , 2001 .

[21]  P. Ajayan,et al.  Aligned Carbon Nanotube Arrays Formed by Cutting a Polymer Resin—Nanotube Composite , 1994, Science.

[22]  Wolfgang Bauhofer,et al.  A review and analysis of electrical percolation in carbon nanotube polymer composites , 2009 .

[23]  L. Robeson,et al.  Polymer nanotechnology: Nanocomposites , 2008 .

[24]  Hideki Nagai,et al.  Shape memory alloys as strain sensors in composites , 2006 .

[25]  Yosif Golfman,et al.  Hybrid Anisotropic Materials for Wind Power Turbine Blades , 2012 .

[26]  R. C. Picu,et al.  The effect of carbon nanotube dimensions and dispersion on the fatigue behavior of epoxy nanocomposites , 2008, Nanotechnology.

[27]  A. Bismarck,et al.  Carbon nanotube-based hierarchical composites: a review , 2010 .

[28]  Karl Schulte,et al.  Load and failure analyses of CFRP laminates by means of electrical resistivity measurements , 1989 .

[29]  James F. Manwell,et al.  A review and design study of blade testing systems for utility-scale wind turbines , 2012 .

[30]  H. S. Osborne,et al.  The international electrotechnical commission , 1953, Electrical Engineering.

[31]  H. Wagner,et al.  Fragmentation of two-fiber hybrid microcomposites: stress concentration factors and interfacial adhesion , 2000 .

[32]  N. A. Isitman,et al.  Nanoclay and carbon nanotubes as potential synergists of an organophosphorus flame-retardant in poly(methyl methacrylate) , 2010 .

[33]  C. Dharan,et al.  High-cycle fatigue of hybrid carbon nanotube/glass fiber/polymer composites , 2008 .

[34]  C. Naddeo,et al.  Mechanical and barrier properties of epoxy resin filled with multi-walled carbon nanotubes , 2009 .

[35]  M. Dresselhaus,et al.  Alternative energy technologies , 2001, Nature.

[36]  Zhan-jun Liu,et al.  Growth of carbon nanotubes on the surface of carbon fibers , 2008 .

[37]  Jang‐Kyo Kim,et al.  Effect of CNT decoration with silver nanoparticles on electrical conductivity of CNT-polymer composites , 2008 .

[38]  Jang-Kyo Kim,et al.  Impact and Delamination Failure of Multiscale Carbon Nanotube-Fiber Reinforced Polymer Composites: A Review , 2011 .

[39]  Leon Mishnaevsky,et al.  Composite materials for wind energy applications: micromechanical modeling and future directions , 2012 .

[40]  R. Young,et al.  SWNT composite coatings as a strain sensor on glass fibres in model epoxy composites , 2009 .

[41]  Zbigniew Lubosny.  Wind Turbine Generator Systems , 2003 .

[42]  R. Gibson,et al.  VIBRATIONS OF CARBON NANOTUBES AND THEIR COMPOSITES: A REVIEW , 2007 .

[43]  Peter J. Schubel,et al.  Review of structural health and cure monitoring techniques for large wind turbine blades , 2013 .

[44]  T. Chou,et al.  Carbon Nanotube Networks: Sensing of Distributed Strain and Damage for Life Prediction and Self Healing , 2006 .

[45]  Ica Manas-Zloczower,et al.  Enhanced fatigue life of carbon nanotube-reinforced epoxy composites† , 2012 .

[46]  J. Wilkerson,et al.  Improvements in mechanical properties of a carbon fiber epoxy composite using nanotube science and technology , 2010 .