Towards sustainable and versatile energy storage devices: an overview of organic electrode materials

As an alternative to conventional inorganic intercalation electrode materials, organic electrode materials are promising candidates for the next generation of sustainable and versatile energy storage devices. In this paper we provide an overview of organic electrode materials, including their fundamental knowledge, development history and perspective applications. Based on different organics including n-type, p-type and bipolar, we firstly analyzed their working principles, reaction mechanisms, electrochemical performances, advantages and challenges. To understand the development history and trends in organic electrode materials, we elaborate in detail various organics with different structures, including conducting polymers, organodisulfides, thioethers, nitroxyl radical polymers and conjugated carbonyl compounds. The high electrochemical performance, in addition with the unique features of organics such as flexibility, processability and structure diversity, provide them great perspective in various energy storage devices, including rechargeable Li/Na batteries, supercapacitors, thin film batteries, aqueous rechargeable batteries, redox flow batteries and even all-organic batteries. It is expected that organic electrode materials will show their talents in the “post Li-ion battery” era, towards cheap, green, sustainable and versatile energy storage devices.

[1]  Itaru Honma,et al.  Application of quinonic cathode compounds for quasi-solid lithium batteries , 2013 .

[2]  Chunsheng Wang,et al.  Nano- and bulk-silicon-based insertion anodes for lithium-ion secondary cells , 2007 .

[3]  N. Oyama,et al.  Dimercaptan–polyaniline composite electrodes for lithium batteries with high energy density , 1995, Nature.

[4]  B. Jang,et al.  Graphene surface-enabled lithium ion-exchanging cells: next-generation high-power energy storage devices. , 2011, Nano letters.

[5]  K. Yoshino,et al.  Characteristics of Polythiophene Battery , 1983 .

[6]  G. Lu,et al.  Fabrication of Graphene/Polyaniline Composite Paper via In Situ Anodic Electropolymerization for High-Performance Flexible Electrode. , 2009, ACS nano.

[7]  Hiroyuki Nishide,et al.  Toward Flexible Batteries , 2008, Science.

[8]  T. Nokami,et al.  Polymer-bound pyrene-4,5,9,10-tetraone for fast-charge and -discharge lithium-ion batteries with high capacity. , 2012, Journal of the American Chemical Society.

[9]  K. Oyaizu,et al.  Nernstian adsorbate-like bulk layer of organic radical polymers for high-density charge storage purposes. , 2008, Journal of the American Chemical Society.

[10]  J. Yi,et al.  Transparent and ultra-bendable all-solid-state supercapacitors without percolation problems , 2013 .

[11]  Ya‐Xia Yin,et al.  Superior radical polymer cathode material with a two-electron process redox reaction promoted by graphene , 2012 .

[12]  Jing Yu Zhang,et al.  Sulfides organic polymer: Novel cathode active material for rechargeable lithium batteries , 2007 .

[13]  Hiroyuki Nishide,et al.  Cathode- and Anode-Active Poly(nitroxylstyrene)s for Rechargeable Batteries: p- and n-Type Redox Switching via Substituent Effects , 2007 .

[14]  Tetsuo Sakai,et al.  Indigo Dye as a Positive-electrode Material for Rechargeable Lithium Batteries , 2010 .

[15]  Hiroyuki Nishide,et al.  Synthesis and Characterization of Radical-Bearing Polyethers as an Electrode-Active Material for Organic Secondary Batteries , 2008 .

[16]  Meilin Liu,et al.  Novel Solid Redox Polymerization Electrodes Electrochemical Properties , 1991 .

[17]  R. V. Salvatierra,et al.  One-Pot Synthesis and Processing of Transparent, Conducting, and Freestanding Carbon Nanotubes/Polyaniline Composite Films , 2010 .

[18]  Meilin Liu,et al.  Electrode Kinetics of Organodisulfide Cathodes for Storage Batteries , 1990 .

[19]  Philippe Poizot,et al.  Evaluation of polyketones with N-cyclic structure as electrode material for electrochemical energy storage: case of tetraketopiperazine unit , 2010 .

[20]  Shigeyuki Iwasa,et al.  Rechargeable batteries with organic radical cathodes , 2002 .

[21]  Akira Yoshino,et al.  The birth of the lithium-ion battery. , 2012, Angewandte Chemie.

[22]  L. Nyholm,et al.  Toward Flexible Polymer and Paper‐Based Energy Storage Devices , 2011, Advanced materials.

[23]  T. Jones,et al.  Electrochemical ESR and voltammetric studies of lithium ion pairing with electrogenerated 9,10-anthraquinone radical anions either free in acetonitrile solution or covalently bound to multiwalled carbon nanotubes. , 2005, The journal of physical chemistry. B.

[24]  Junmei Zhao,et al.  Disodium Terephthalate (Na2C8H4O4) as High Performance Anode Material for Low‐Cost Room‐Temperature Sodium‐Ion Battery , 2012 .

[25]  Haoshen Zhou,et al.  Aromatic porous-honeycomb electrodes for a sodium-organic energy storage device , 2013, Nature Communications.

[26]  A. Heeger,et al.  Synthesis of electrically conducting organic polymers: halogen derivatives of polyacetylene, (CH)x , 1977 .

[27]  M. Satoh,et al.  Charge/Discharge Properties of Organometallic Batteries Fabricated with Ferrocene–Containing Polymers , 2008 .

[28]  Xianyou Wang,et al.  Porous polythiophene as a cathode material for lithium batteries with high capacity and good cycling stability , 2012 .

[29]  P. Novák,et al.  Synthesis of a polymeric 2,5-di- t-butyl-1,4-dialkoxybenzene and its evaluation as a novel cathode m , 2011 .

[30]  Yi Cui,et al.  New nanostructured Li2S/silicon rechargeable battery with high specific energy. , 2010, Nano letters.

[31]  S. Cho,et al.  Fast electrochemistry of conductive polymer nanotubes: synthesis, mechanism, and application. , 2008, Accounts of chemical research.

[32]  Philippe Poizot,et al.  Clean energy new deal for a sustainable world: from non-CO2 generating energy sources to greener electrochemical storage devices , 2011 .

[33]  M. Armand,et al.  Building better batteries , 2008, Nature.

[34]  D. Kalaiselvi,et al.  Zeolite modification of organic cathodes : Clean technology for improved cycle life of the zinc-chloranil organic secondary battery , 2000 .

[35]  An all solid-state rechargeable lithium-iodine thin film battery using LiI(3-hydroxypropionitrile)2 as an I− ion electrolyte , 2011 .

[36]  N. Oyama,et al.  Roles of metal nanoparticles on organosulfur-conducting polymer composites for lithium battery with high energy density , 2002 .

[37]  Jiro Iriyama,et al.  Al-laminated film packaged organic radical battery for high-power applications , 2007 .

[38]  Ulrich S. Schubert,et al.  Powering up the Future: Radical Polymers for Battery Applications , 2012, Advanced materials.

[39]  J. S. Foos,et al.  Synthesis and Characterization of Semiconductive Poly‐1,4‐Dimethoxybenzene and Its Derived Polyquinone , 1986 .

[40]  Ming Li,et al.  A Novel Coordination Polymer as Positive Electrode Material for Lithium Ion Battery , 2008 .

[41]  Bin Li,et al.  Recent Progress in Redox Flow Battery Research and Development , 2012 .

[42]  Ji-Won Choi,et al.  Issue and challenges facing rechargeable thin film lithium batteries , 2008 .

[43]  Shigeyuki Iwasa,et al.  Cationic Polymerization of Poly(vinyl ether) Bearing a TEMPO Radical: A New Cathode‐Active Material for Organic Radical Batteries , 2007 .

[44]  Noboru Oyama,et al.  Significant effects of poly(3,4-ethylenedioxythiophene) additive on redox responses of poly(2,5-dihydroxy-1,4-benzoquinone-3,6-methylene) cathode for rechargeable Li batteries , 2009 .

[45]  Noboru Oyama,et al.  Electrochemical Activity of Sulfur-Linked Tetrathionaphthalene Polymer , 2010 .

[46]  Kenichiroh Koshika,et al.  An ultrafast chargeable polymer electrode based on the combination of nitroxide radical and aqueous electrolyte. , 2009, Chemical communications.

[47]  Meilin Liu,et al.  Novel Solid Redox Polymerization Electrodes: All‐Solid‐State, Thin‐Film, Rechargeable Lithium Batteries , 1991 .

[48]  Yunhong Zhou,et al.  Poly(tetrahydrobenzodithiophene): High discharge specific capacity as cathode material for lithium batteries , 2009 .

[49]  H. Sohn,et al.  Black Phosphorus and its Composite for Lithium Rechargeable Batteries , 2007 .

[50]  H. Binder,et al.  Investigation into the use of quinone compounds-for battery cathodes , 1972 .

[51]  Jean-Marie Tarascon,et al.  Li-O2 and Li-S batteries with high energy storage. , 2011, Nature materials.

[52]  P. Gómez‐Romero.  Hybrid Organic–Inorganic Materials—In Search of Synergic Activity , 2001 .

[53]  Kai Zhang,et al.  Graphene/Polyaniline Nanofiber Composites as Supercapacitor Electrodes , 2010 .

[54]  Liangbing Hu,et al.  Emerging Transparent Electrodes Based on Thin Films of Carbon Nanotubes, Graphene, and Metallic Nanostructures , 2011, Advanced materials.

[55]  K. Nakahara,et al.  Fabrication of a Practical and Polymer‐Rich Organic Radical Polymer Electrode and its Rate Dependence , 2008 .

[56]  Tetsuo Sakai,et al.  High-capacity organic positive-electrode material based on a benzoquinone derivative for use in rechargeable lithium batteries , 2010 .

[57]  M. Namazian,et al.  Computational electrochemistry: aqueous two-electron reduction potentials for substituted quinones , 2004 .

[58]  John T. Vaughey,et al.  Li{sub2}MnO{sub3}-stabilized LiMO{sub2} (M=Mn, Ni, Co) electrodes for high energy lithium-ion batteries , 2007 .

[59]  Jean-Marie Tarascon,et al.  Towards sustainable and renewable systems for electrochemical energy storage. , 2008, ChemSusChem.

[60]  K. Oyaizu,et al.  Synthesis and charge transport properties of redox-active nitroxide polyethers with large site density , 2010 .

[61]  P. He,et al.  Raising the cycling stability of aqueous lithium-ion batteries by eliminating oxygen in the electrolyte. , 2010, Nature chemistry.

[62]  Petr Novák,et al.  Synthesis of Poly(4-methacryloyloxy-TEMPO) via Group-Transfer Polymerization and Its Evaluation in Organic Radical Battery , 2007 .

[63]  K. Oyaizu,et al.  Aqueous electrochemistry of poly(vinylanthraquinone) for anode-active materials in high-density and rechargeable polymer/air batteries. , 2011, Journal of the American Chemical Society.

[64]  Donghan Kim,et al.  Sodium‐Ion Batteries , 2013 .

[65]  J. Driscoll,et al.  A High Energy Density Lithium/Dichloroisocyanuric Acid Battery System , 1969 .

[66]  Hanxi Yang,et al.  Redox‐Active Fe(CN)64−‐Doped Conducting Polymers with Greatly Enhanced Capacity as Cathode Materials for Li‐Ion Batteries , 2011, Advanced materials.

[67]  S. Visco,et al.  Ionic conductivity of organosulfur melts for advanced storage electrodes , 1988 .

[68]  G. Pistoia,et al.  On the use of nonylbenzo-hexaquinone as a substitute for monomeric quinones in non-aqueous cells , 1984 .

[69]  Yunhong Zhou,et al.  PEDOT: Cathode active material with high specific capacity in novel electrolyte system , 2008 .

[70]  Shuhong Yu,et al.  Flexible graphene–polyaniline composite paper for high-performance supercapacitor , 2013 .

[71]  Jun Liu,et al.  Polymer-graphene nanocomposites as ultrafast-charge and -discharge cathodes for rechargeable lithium batteries. , 2012, Nano letters.

[72]  Teófilo Rojo,et al.  Na-ion batteries, recent advances and present challenges to become low cost energy storage systems , 2012 .

[73]  P. Poizot,et al.  Evaluation of polyketones with N-cyclic structure as electrode material for electrochemical energy storage: case of pyromellitic diimide dilithium salt. , 2011, Chemical communications.

[74]  T. Sugimoto,et al.  High-performance Lithium Secondary Batteries Using Cathode Active Materials of Triquinoxalinylenes Exhibiting Six Electron Migration , 2011 .

[75]  Haoshen Zhou,et al.  An energy storage principle using bipolar porous polymeric frameworks. , 2012, Angewandte Chemie.

[76]  K. Oyaizu,et al.  Radical Polymers for Organic Electronic Devices: A Radical Departure from Conjugated Polymers? , 2009 .

[77]  Tao Wu,et al.  Benzene-based polyorganodisulfide cathode materials for secondary lithium batteries , 2006 .

[78]  Jean-Marie Tarascon,et al.  Cover Picture: From Biomass to a Renewable LiXC6O6 Organic Electrode for Sustainable Li‐Ion Batteries (ChemSusChem 4/2008) , 2008 .

[79]  Seung M. Oh,et al.  Sodium Terephthalate as an Organic Anode Material for Sodium Ion Batteries , 2012, Advanced materials.

[80]  Yunhong Zhou,et al.  Poly[3,4-(ethylenedithio)thiophene] : High specific capacity cathode active material for lithium rechargeable batteries , 2008 .

[81]  Fikile R. Brushett,et al.  An All‐Organic Non‐aqueous Lithium‐Ion Redox Flow Battery , 2012 .

[82]  T. Sakai,et al.  Redox active poly(N-vinylcarbazole) for use in rechargeable lithium batteries , 2012 .

[83]  Grzegorz Milczarek,et al.  Renewable Cathode Materials from Biopolymer/Conjugated Polymer Interpenetrating Networks , 2012, Science.

[84]  N. Oyama,et al.  Effects of Adding Copper(II) Salt to Organosulfur Cathodes for Rechargeable Lithium Batteries , 1997 .

[85]  Jean-Marie Tarascon,et al.  From biomass to a renewable LixC6O6 organic electrode for sustainable Li-ion batteries. , 2008, ChemSusChem.

[86]  Michel Armand,et al.  A new class of Solvent-in-Salt electrolyte for high-energy rechargeable metallic lithium batteries , 2013, Nature Communications.

[87]  M. Pasquali,et al.  Redox mechanism and cycling behaviour of nonylbenzo-hexaquinone electrodes in Li cells , 1987 .

[88]  P. Nigrey,et al.  Lightweight Rechargeable Storage Batteries Using Polyacetylene, ( CH ) x as the Cathode‐Active Material , 1981 .

[89]  M. Armand,et al.  Electrochemical characterization of lithium 4,4′-tolane-dicarboxylate for use as a negative electrode in Li-ion batteries , 2011 .

[90]  A. Best,et al.  Conducting-polymer-based supercapacitor devices and electrodes , 2011 .

[91]  R. Baughman,et al.  Polyacetylene and Polyphenylene as Anode Materials for Nonaqueous Secondary Batteries , 1985 .

[92]  Yuliang Cao,et al.  An all-organic rechargeable battery using bipolar polyparaphenylene as a redox-active cathode and anode. , 2013, Chemical communications.

[93]  Yunhong Zhou,et al.  Polyimides: promising energy-storage materials. , 2010, Angewandte Chemie.

[94]  P. Novák,et al.  Electrochemically Active Polymers for Rechargeable Batteries. , 1997, Chemical reviews.

[95]  Hiroyuki Nishide,et al.  Photocrosslinked nitroxide polymer cathode-active materials for application in an organic-based paper battery. , 2007, Chemical communications.

[96]  J. Cabana,et al.  Beyond Intercalation‐Based Li‐Ion Batteries: The State of the Art and Challenges of Electrode Materials Reacting Through Conversion Reactions , 2010, Advanced materials.

[97]  Yi Cui,et al.  Printed energy storage devices by integration of electrodes and separators into single sheets of paper , 2010 .

[98]  Fred Wudl,et al.  Ethoxycarbonyl-based organic electrode for Li-batteries. , 2010, Journal of the American Chemical Society.

[99]  Itaru Honma,et al.  Rechargeable quasi-solid state lithium battery with organic crystalline cathode , 2012, Scientific Reports.

[100]  Organic Radical Battery Approaching Practical Use , 2011 .

[101]  John B. Goodenough,et al.  High-Rate LiFePO4 Lithium Rechargeable Battery Promoted by Electrochemically Active Polymers , 2008 .

[102]  Jun-ichi Yamaki,et al.  Cathode Characteristics of Organic Electron Acceptors for Lithium Batteries , 1984 .

[103]  Anran Liu,et al.  Supercapacitors based on flexible graphene/polyaniline nanofiber composite films. , 2010, ACS nano.

[104]  Gerbrand Ceder,et al.  Electrode Materials for Rechargeable Sodium‐Ion Batteries: Potential Alternatives to Current Lithium‐Ion Batteries , 2012 .

[105]  J. Bates.  Thin-Film Lithium and Lithium-Ion Batteries , 2000 .

[106]  John R. Owen,et al.  Poly(2,5-dihydroxy-1,4-benzoquinone-3,6-methylene): a new organic polymer as positive electrode material for rechargeable lithium batteries , 2003 .

[107]  Jun Chen,et al.  Organic Electrode Materials for Rechargeable Lithium Batteries , 2012 .

[108]  Phillip K. Koech,et al.  Factors Affecting the Battery Performance of Anthraquinone-based Organic Cathode Materials , 2012 .

[109]  Daoben Zhu,et al.  Semiconducting π-conjugated systems in field-effect transistors: a material odyssey of organic electronics. , 2012, Chemical reviews.

[110]  K. Naoi,et al.  Electrochemistry of Poly(2,2′‐dithiodianiline): A New Class of High Energy Conducting Polymer Interconnected with S‒S Bonds , 1997 .

[111]  Xiong Gong,et al.  Organic photoresponse materials and devices. , 2012, Chemical Society reviews.

[112]  P. Bruce,et al.  Rechargeable LI2O2 electrode for lithium batteries. , 2006, Journal of the American Chemical Society.

[113]  Jiro Iriyama,et al.  Cell properties for modified PTMA cathodes of organic radical batteries , 2007 .

[114]  N. Oyama.  Development of polymer‐based lithium secondary battery , 2000 .

[115]  M. Armand,et al.  Issues and challenges facing rechargeable lithium batteries , 2001, Nature.

[116]  N. Mermilliod,et al.  A Study of Chemically Synthesized Polypyrrole as Electrode Material for Battery Applications , 1986 .

[117]  J. Dahn,et al.  Rechargeable Lithium Batteries with Aqueous Electrolytes , 1994, Science.

[118]  Shimshon Gottesfeld,et al.  Conducting polymers as active materials in electrochemical capacitors , 1994 .

[119]  Zen-ichiro Takehara,et al.  Nonaqueous lithium/pyromellitic dianhydride cell , 1979 .

[120]  Petr Novák,et al.  Poly(5‐amino‐1,4‐naphthoquinone), a Novel Lithium‐Inserting Electroactive Polymer with High Specific Charge , 1999 .

[121]  Madan Dubey,et al.  Lithium storage mechanisms in purpurin based organic lithium ion battery electrodes , 2012, Scientific Reports.

[122]  Taolei Sun,et al.  Aromatic Carbonyl Derivative Polymers as High‐Performance Li‐Ion Storage Materials , 2007 .

[123]  Jin Yi,et al.  Recent Progress in Aqueous Lithium‐Ion Batteries , 2012 .

[124]  H. Sakaebe,et al.  A two-compartment cell for using soluble benzoquinone derivatives as active materials in lithium secondary batteries , 2011 .

[125]  Dongsheng Lu,et al.  Synthesis and properties of a lithium-organic coordination compound as lithium-inserted material for lithium ion batteries , 2010 .

[126]  Yunhong Zhou,et al.  Anthraquinone based polymer as high performance cathode material for rechargeable lithium batteries. , 2009, Chemical communications.

[127]  B. Dunn,et al.  Protection of lithium metal surfaces using tetraethoxysilane , 2011 .

[128]  Z. Yin,et al.  Controlled Synthesis and Energy Applications of One‐Dimensional Conducting Polymer Nanostructures: An Overview , 2012 .

[129]  N. Gospodinova,et al.  Conducting polymers prepared by oxidative polymerization: polyaniline , 1998 .

[130]  Dong Fang,et al.  Electrochemical Properties of an All-Organic Redox Flow Battery Using 2,2,6,6-Tetramethyl-1-Piperidinyloxy and N-Methylphthalimide , 2011 .

[131]  M. Shamsipur,et al.  Calculation of the two-step reduction potentials of some quinones in acetonitrile , 2008 .

[132]  Lelia Cosimbescu,et al.  Anthraquinone with tailored structure for a nonaqueous metal-organic redox flow battery. , 2012, Chemical communications.

[133]  Gaoping Cao,et al.  Study on a single flow acid Cd–chloranil battery , 2009 .

[134]  Jean-Marie Tarascon,et al.  Lithium salt of tetrahydroxybenzoquinone: toward the development of a sustainable Li-ion battery. , 2009, Journal of the American Chemical Society.

[135]  H. X. Yang,et al.  Polytriphenylamine: A high power and high capacity cathode material for rechargeable lithium batteries , 2008 .

[136]  Jim P. Zheng,et al.  Li-ion capacitors with carbon cathode and hard carbon/stabilized lithium metal powder anode electrodes , 2012 .

[137]  M. Armand,et al.  Conjugated dicarboxylate anodes for Li-ion batteries. , 2009, Nature materials.

[138]  Ju-tang Sun,et al.  How many lithium ions can be inserted onto fused C6 aromatic ring systems? , 2012, Angewandte Chemie.

[139]  Hiroyuki Nishide,et al.  Emerging N‐Type Redox‐Active Radical Polymer for a Totally Organic Polymer‐Based Rechargeable Battery , 2009 .

[140]  Oleg G. Poluektov,et al.  Sodium insertion in carboxylate based materials and their application in 3.6 V full sodium cells , 2012 .

[141]  A. Vadivel Murugan,et al.  Electrochemically synthesised conducting polymeric materials for applications towards technology in electronics, optoelectronics and energy storage devices , 1999 .

[142]  Zhongbao Yu,et al.  A MC/AQ Parasitic Composite as Cathode Material for Lithium Battery , 2011 .

[143]  Noboru Oyama,et al.  Lithium polymer battery with high energy density , 2000 .

[144]  Alan G. MacDiarmid,et al.  Polyaniline: Electrochemistry and application to rechargeable batteries , 1987 .

[145]  Dong-Hwa Seo,et al.  Flexible energy storage devices based on graphene paper , 2011 .

[146]  K. Oyaizu,et al.  Radical Polymer‐Wrapped SWNTs at a Molecular Level: High‐Rate Redox Mediation Through a Percolation Network for a Transparent Charge‐Storage Material , 2011, Advanced materials.

[147]  BRENT C. MELOT,et al.  Design and preparation of materials for advanced electrochemical storage. , 2013, Accounts of chemical research.

[148]  J. Choi,et al.  Effect of N-substitution in naphthalenediimides on the electrochemical performance of organic rechargeable batteries , 2012 .

[149]  Shuo Chen,et al.  High-power lithium batteries from functionalized carbon-nanotube electrodes. , 2010, Nature nanotechnology.

[150]  N. Oyama,et al.  New organodisulfide—polyaniline composite cathode for secondary lithium battery , 1992 .