Parametric study of the physical properties of hydrate-bearing sand, silt, and clay sediments: 1. Electromagnetic properties

[1] The marked decrease in bulk electrical conductivity of sediments in the presence of gas hydrates has been used to interpret borehole electrical resistivity logs and, to a lesser extent, the results of controlled source electromagnetic surveys to constrain the spatial distribution and predicted concentration of gas hydrate in natural settings. Until now, an exhaustive laboratory data set that could be used to assess the impact of gas hydrate on the electromagnetic properties of different soils (sand, silt, and clay) at different effective stress and with different saturations of hydrate has been lacking. The laboratory results reported here are obtained using a standard geotechnical cell and the hydrate-formed tetrahydrofuran (THF), a liquid that is fully miscible in water and able to produce closely controlled saturations of hydrate from dissolved phase. Both permittivity and electrical conductivity are good indicators of the volume fraction of free water in the sediment, which is in turn dependent on hydrate saturation. Permittivity in the microwave frequency range is particularly predictive of free water content since it is barely affected by ionic concentration, pore structure, and surface conduction. Electrical conductivity (or resistivity) is less reliable for constraining water content or hydrate saturation: In addition to fluid-filled porosity, other factors, such as the ionic concentration of the pore fluid and possibly other conduction effects (e.g., surface conduction in high specific surface soils having low conductivity pore fluid), also influence electrical conductivity.

[1]  Tae Sup Yun,et al.  Compressional and shear wave velocities in uncemented sediment containing gas hydrate , 2005 .

[2]  B. Buffett,et al.  Formation of gas hydrate from dissolved gas in natural porous media , 2000 .

[3]  J. C. Santamarina,et al.  Parametric study of the physical properties of hydrate‐bearing sand, silt, and clay sediments: 2. Small‐strain mechanical properties , 2010 .

[4]  J. Santamarina,et al.  THE IMPACT OF HYDRATE SATURATION ON THE MECHANICAL, ELECTRICAL, AND THERMAL PROPERTIES OF HYDRATE-BEARING SAND, SILTS, AND CLAY , 2008 .

[5]  Kerry Key,et al.  First results from a marine controlled‐source electromagnetic survey to detect gas hydrates offshore Oregon , 2006 .

[6]  E. Spangenberg.  Modeling of the influence of gas hydrate content on the electrical properties of porous sediments , 2001 .

[7]  Klas Lackschewitz,et al.  Proceedings of the Ocean Drilling Program , 2002 .

[8]  William F. Waite,et al.  Effect of grain size and pore pressure on acoustic and strength behavior of sediments containing methane gas hydrate , 2005 .

[9]  Pierre Henry,et al.  Formation of natural gas hydrates in marine sediments 1. Conceptual model of gas hydrate growth conditioned by host sediment properties , 1999 .

[10]  J. C. Santamarina,et al.  Mechanical and electromagnetic properties of northern Gulf of Mexico sediments with and without THF hydrates , 2008 .

[11]  C. Ruppel,et al.  Thermal Conductivity Measurements in Porous Mixtures of Methane Hydrate and Quartz Sand , 2002 .

[12]  T. Baker,et al.  COMPRESSIVE STRENGTH AND CREEP BEHAVIOR OF HYDRATE-CONSOLIDATED SAND , 1990 .

[13]  R. M. Owen,et al.  Lithology of the upper gas hydrate zone, Blake Outer Ridge: a link between diatoms, porosity, and gas hydrate , 2000 .

[14]  Tae Sup Yun,et al.  Physical properties of hydrate‐bearing sediments , 2009 .

[15]  P. Ruoff,et al.  Kinetics of gas hydrate formation in w/o-emulsions the model system trichlorofluoromethane/water/non-ionic surfactant studied by means of dielectric spectroscopy , 1996 .

[16]  T. Collett,et al.  Detection of gas hydrate with downhole logs and assessment of gas hydrate concentrations (saturations) and gas volumes on the Blake Ridge with electrical resistivity log data , 2000 .

[17]  R. Hyndman,et al.  THE CONCENTRATION OF DEEP SEA GAS HYDRATES FROM DOWNHOLE ELECTRICAL RESISTIVITY LOGS AND LABORATORY DATA , 1999 .

[18]  I. Jefferson,et al.  Soil mechanics in engineering practice , 1997 .

[19]  Tae Sup Yun,et al.  Observations related to tetrahydrofuran and methane hydrates for laboratory studies of hydrate‐bearing sediments , 2007 .

[20]  C. Clayton,et al.  A laboratory investigation into the seismic velocities of methane gas hydrate‐bearing sand , 2005 .

[21]  G. E. Archie.  The electrical resistivity log as an aid in determining some reservoir characteristics , 1942 .

[22]  A. Myerson,et al.  THF–water hydrate crystallization: an experimental investigation , 1999 .

[23]  Joo-yong Lee,et al.  Hydrate-bearing sediments: Formation and geophysical properties , 2007 .

[24]  Tae Sup Yun,et al.  Thermal conductivity of hydrate‐bearing sediments , 2009 .

[25]  Johannes Kulenkampff,et al.  Influence of methane hydrate content on electrical sediment properties , 2006 .

[26]  Tae Sup Yun,et al.  Mechanical properties of sand, silt, and clay containing tetrahydrofuran hydrate , 2007 .

[27]  Kjetil Folgerø,et al.  Dielectric measurements of gas hydrate formation in water-in-oil emulsions using open-ended coaxial probes , 1997 .

[28]  J. Murphy,et al.  Acoustic and resistivity measurements on rock samples containing tetrahydrofuran hydrates: Laboratory analogues to natural gas hydrate deposits , 1986 .

[29]  R. N. Edwards,et al.  Marine gas hydrate electromagnetic signatures in Cascadia and their correlation with seismic blank zones , 2005 .

[30]  F. Anselmetti,et al.  Proceedings of the Ocean Drilling Program. Initial Reports , 2002 .