Assessing the stability of unreinforced masonry arches and vaults: a comparison of analytical and numerical strategies

ABSTRACT Despite being accepted as a robust assessment of masonry stability, thrust line analysis (TLA) relies on assumptions that can lead to a conservative assessment of stability. This article aims to quantify the extent of these limitations through a comparison of TLA with discrete element modeling (DEM). Two studies are provided. The first study compares TLA with DEM (using fixed input parameters) in assessing the stability of unreinforced masonry arches, semi-circular barrel vaults, multi-ring arches, and groin vaults. The tests demonstrate the types of sliding failures overlooked by the safe theorem due to its assumption of infinite friction. Following these validations, the comparisons between 2D structures and 3D counterparts also give insight into the efficacy of the slicing method. The second study examines the effect of DEM input parameters on the DEM-predicted stability of the considered geometries. While material parameters had limited effect on the determination of stability, for each typology, joint friction angle had a unique impact on stability. These trends are graphically presented and demonstrate how t/R ratios alone are not sufficient to unequivocally confirm stability of the considered vaults. Overall, this research informs the extent of safety for using the geometry-based analysis tool, TLA, for analyzing masonry structures.

[1]  Gabriele Milani,et al.  Advanced numerical models for the analysis of masonry cross vaults: A case-study in Italy , 2014 .

[2]  Y. Sheng,et al.  Influence of brick–mortar interface on the mechanical behaviour of low bond strength masonry brickwork lintels , 2015 .

[3]  M. Gilbert,et al.  Limit analysis applied to masonry arch bridges : state-ofthe-art and recent developments , 2007 .

[4]  John Ochsendorf,et al.  Collapse of masonry structures , 2002 .

[5]  Branko Glisic,et al.  Comparison of thrust line analysis, limit state analysis and distinct element modeling to predict the collapse load and collapse mechanism of a rammed earth arch , 2017 .

[6]  Philippe Block,et al.  Thrust Network Analysis : exploring three-dimensional equilibrium , 2009 .

[7]  A. Kooharian.  Limit Analysis of Voussoir (Segmental) and Concrete Archs , 1952 .

[8]  Philippe Block,et al.  Three-Dimensional (3D) Equilibrium Analysis of Gothic Masonry Vaults , 2014 .

[9]  Jacques Heyman,et al.  The masonry arch , 1982 .

[10]  Amin Mohebkhah,et al.  Numerical Modeling of Historic Masonry Structures , 2015 .

[11]  António Arêde,et al.  Detailed FE and DE Modelling of Stone Masonry Arch Bridges for the Assessment of Load-carrying Capacity , 2015 .

[12]  P. Lourenço,et al.  Limit Analysis of Masonry Constructions by 3 D Funicular Modelling , 2022 .

[13]  Michael R. Horne,et al.  Plastic theory of structures , 1971 .

[14]  Jacques Heyman,et al.  The stone skeleton , 1995 .

[15]  Douglas T. Wright,et al.  Equilibrium of shell structures , 1978 .

[16]  Paulo B. Lourenço,et al.  Geometric issues and ultimate load capacity of masonry arch bridges from the northwest Iberian Peninsula , 2010 .

[17]  P. A. Cundall,et al.  FORMULATION OF A THREE-DIMENSIONAL DISTINCT ELEMENT MODEL - PART I. A SCHEME TO DETECT AND REPRESENT CONTACTS IN A SYSTEM COMPOSED OF MANY POLYHEDRAL BLOCKS , 1988 .

[18]  Nicos Makris,et al.  Validation of the Discrete Element Method for the Limit Stability Analysis of Masonry Arches , 2016 .

[19]  Matthew J. DeJong,et al.  Two approaches to modelling the stability of the basilica of Vézelay , 2016 .

[20]  Rebecca Napolitano,et al.  Validating the Use of Graphical Thrust Line Analysis for Pier Buttresses: The Case Study of Amiens Cathedral , 2017 .

[21]  D. Faulkner,et al.  Plastic theory of structures, 2nd edition: By M. R. Horne. Pp. vi + 179. Pergamon Press, Oxford. 1979. £8.25 , 1980 .

[22]  Dermot O'Dwyer,et al.  Funicular analysis of masonry vaults , 1999 .

[23]  P. Cundall,et al.  FORMULATION OF A THREE-DIMENSIONAL DISTINCT ELEMENT MODEL - PART II. MECHANICAL CALCULATIONS FOR MOTION AND INTERACTION OF A SYSTEM COMPOSED OF MANY POLYHEDRAL BLOCKS , 1988 .

[24]  Giulio Mirabella Roberti,et al.  Discrete element analysis on the Sardinian "Nuraghe" , 2001 .

[25]  Pedro Arias,et al.  Photogrammetric 3D modelling and mechanical analysis of masonry arches: An approach based on a discontinuous model of voussoirs , 2011 .

[26]  Nicos Makris,et al.  The effect of stereotomy on the shape of the thrust-line and the minimum thickness of semicircular masonry arches , 2013 .

[27]  J. Ochsendorf,et al.  As Hangs the Flexible Line: Equilibrium of Masonry Arches , 2006 .

[28]  Miguel Cervera,et al.  Structural Analysis of Masonry Historical Constructions. Classical and Advanced Approaches , 2010 .

[29]  Vasilis Sarhosis,et al.  Identification of material parameters for low bond strength masonry , 2014 .

[30]  Lluís Gil,et al.  Computational Analysis of Masonry Structures with a Funicular Model , 2007 .

[31]  José V. Lemos,et al.  Numerical study of the seismic behaviour of a part of the Parthenon Pronaos , 2003 .

[32]  William John Macquorn Rankine,et al.  A manual of applied mechanics , 2022 .

[33]  Philippe Block.  Equilibrium systems Studies in Masonry Structure , 2005 .

[34]  Clive. Melbourne,et al.  RIGID-BLOCK ANALYSIS OF MASONRY STRUCTURES , 1994 .

[35]  Matthew J. DeJong,et al.  Discrete Element Modeling of Groin Vault Displacement Capacity , 2015 .