Regionalized LCA-based optimization of building energy supply: method and case study for a Swiss municipality.

This paper presents a regionalized LCA-based multiobjective optimization model of building energy demand and supply for the case of a Swiss municipality for the minimization of greenhouse gas emissions and particulate matter formation. The results show that the environmental improvement potential is very large: in the optimal case, greenhouse gas emissions from energy supply could be reduced by more than 75% and particulate emissions by over 50% in the municipality. This scenario supposes a drastic shift of heat supply systems from a fossil fuel dominated portfolio to a portfolio consisting of mainly heat pump and woodchip incineration systems. In addition to a change in heat supply technologies, roofs, windows and walls would need to be refurbished in more than 65% of the municipality's buildings. The full potential of the environmental impact reductions will hardly be achieved in reality, particularly in the short term, for example, because of financial constraints and social acceptance, which were not taken into account in this study. Nevertheless, the results of the optimization model can help policy makers to identify the most effective measures for improvement at the decision making level, for example, at the building level for refurbishment and selection of heating systems or at the municipal level for designing district heating networks. Therefore, this work represents a starting point for designing effective incentives to reduce the environmental impact of buildings. While the results of the optimization model are specific to the municipality studied, the model could readily be adapted to other regions.

[1]  You-Yin Jing,et al.  Multi-objective optimization design and operation strategy analysis of BCHP system based on life cycle assessment , 2012 .

[2]  S. Hellweg,et al.  Housing and mobility demands of individual households and their life cycle assessment. , 2013, Environmental science & technology.

[3]  Adisa Azapagic,et al.  Life cycle assessment and linear programming environmental optimisation of product system , 1995 .

[4]  Sönke Szidat,et al.  Dominant impact of residential wood burning on particulate matter in Alpine valleys during winter , 2007 .

[5]  Niko Heeren,et al.  A component based bottom-up building stock model for comprehensive environmental impact assessment and target control , 2013 .

[6]  A. Horvath,et al.  Assessing regional intake fractions in North America. , 2009, The Science of the total environment.

[7]  Josef Kallrath,et al.  Algebraic Modeling Systems , 2012 .

[8]  E. Hertwich,et al.  Carbon footprint of nations: a global, trade-linked analysis. , 2009, Environmental science & technology.

[9]  Bedrich Benes,et al.  Quantification of fossil fuel CO2 emissions on the building/street scale for a large U.S. city. , 2012, Environmental science & technology.

[10]  Gonzalo Guillén-Gosálbez,et al.  A global optimization strategy for the environmentally conscious design of chemical supply chains under uncertainty in the damage assessment model , 2010, Comput. Chem. Eng..

[11]  Maria K. Janowiak,et al.  Promoting Ecological Sustainability in Woody Biomass Harvesting , 2010, Journal of Forestry.

[12]  Adisa Azapagic,et al.  Life cycle assessment and multiobjective optimisation , 1999 .

[13]  Mario Fontana,et al.  Energy retrofit of a single-family house: Life cycle net energy saving and environmental benefits , 2013 .

[14]  Gonzalo Guillén-Gosálbez,et al.  Application of life cycle assessment to the structural optimization of process flowsheets , 2007 .

[15]  Arnold Tukker,et al.  Environmental Impacts of Products: A Detailed Review of Studies , 2006 .

[16]  Vasilis Fthenakis,et al.  Life cycle analysis in the construction sector: Guiding the optimization of conventional Italian buildings , 2013 .

[17]  Leif Gustavsson,et al.  Life cycle primary energy use and carbon emission of an eight-storey wood-framed apartment building , 2010 .

[18]  Adisa Azapagic,et al.  A mathematical model and decision-support framework for material recovery, recycling and cascaded use , 2002 .

[19]  François Maréchal,et al.  EnerGis: A geographical information based system for the evaluation of integrated energy conversion systems in urban areas , 2008 .

[20]  Efstratios N. Pistikopoulos,et al.  Minimizing the environmental impact of process Plants: A process systems methodology , 1995 .

[21]  Matthias Ehrgott,et al.  Multicriteria Optimization , 2005 .

[22]  Enrico Fabrizio,et al.  A model to design and optimize multi-energy systems in buildings at the design concept stage , 2010 .

[23]  Raymond R. Tan,et al.  A fuzzy linear programming extension of the general matrix-based life cycle model , 2008 .

[24]  Sara E. Keckler,et al.  Material Reuse Modeling , 1998 .

[25]  A. Antón,et al.  Compost benefits for agriculture evaluated by life cycle assessment. A review , 2013, Agronomy for Sustainable Development.

[26]  Andrew G. Livingston,et al.  Environmental impact considerations in the optimal design and scheduling of batch processes , 1997 .

[27]  Ka Chi Lam,et al.  An audit of life cycle energy analyses of buildings , 2013 .

[28]  Gonzalo Guillén-Gosálbez,et al.  Optimal design and planning of sustainable chemical supply chains under uncertainty , 2009 .

[29]  Efstratios N. Pistikopoulos,et al.  Environmentally conscious long-range planning and design of supply chain networks , 2005 .

[30]  Adisa Azapagic,et al.  Life cycle Assessment and its Application to Process Selection, Design and Optimisation , 1999 .

[31]  François Maréchal,et al.  Systematic integration of LCA in process systems design: Application to combined fuel and electricity production from lignocellulosic biomass , 2011, Comput. Chem. Eng..

[32]  Ravi Prakash,et al.  Life cycle energy analysis of buildings: An overview , 2010 .

[33]  Usha Iyer-Raniga,et al.  Evaluation of whole life cycle assessment for heritage buildings in Australia , 2012 .

[34]  Carla Pieragostini,et al.  On process optimization considering LCA methodology. , 2012, Journal of environmental management.

[35]  Stefanie Hellweg,et al.  Is it only CO2 that matters? A life cycle perspective on shallow geothermal systems , 2010 .

[36]  Maurizio Cellura,et al.  Energy and environmental benefits in public buildings as a result of retrofit actions , 2011 .

[37]  Francesca Stazi,et al.  Life cycle assessment approach for the optimization of sustainable building envelopes: An application on solar wall systems , 2012 .

[38]  Jun Nakatani,et al.  Multicriteria Design of Plastic Recycling Based on Quality Information and Environmental Impacts , 2011 .