A critical review on the performance and design of combined cooled ceiling and displacement ventilation systems

This paper reviews the studies and design of cooled ceiling and displacement ventilation (CC/DV) systems in buildings. If properly designed, the combined CC/DV systems can provide better indoor air quality and thermal comfort level compared to the widely used variable air volume (VAV) mixing systems. The cooling load removed by DV is a key design parameter. A low DV load has a positive effect on thermal comfort due to a small vertical temperature gradient, yet also has a negative effect on indoor air quality due to the increased mixing of room air. The impact of the room height on the temperature and contaminant concentration profiles is negligible in the occupied zone. The CC/DV systems are more effective in removing active contaminants (as indicated by CO2) than passive contaminants (e.g. VOCs). The condensation risk on the chilled ceiling panel is high because of the high humidity ratio in the region close to the panel. To prevent condensation on the panel, it is important to properly control the system for transient regimes, such as startup and shutdown periods, and to minimize infiltration of humid outdoor air. Whether a CC/DV system may or may not reduce energy consumption depends on the supply air temperature, outdoor airflow rate, and cooling load. Therefore, it is necessary to develop design guidelines for CC/DV systems for US buildings because the climate, building layout, and cooling load can be different from those studied elsewhere.

[1]  Qingyan Chen,et al.  A critical review of displacement ventilation , 1998 .

[2]  Dennis L. Loveday,et al.  Thermal comfort in chilled ceiling and displacement ventilation environments: vertical radiant temperature asymmetry effects , 1998 .

[3]  Martin Behne,et al.  Indoor air quality in rooms with cooled ceilings.: Mixing ventilation or rather displacement ventilation? , 1999 .

[4]  Jianlei Niu,et al.  Indoor climate in rooms with cooled ceiling systems , 1994 .

[5]  A. Moser,et al.  Indoor airflow with cooling panel and radiative/convective heat source , 1992 .

[6]  Jianlei Niu,et al.  ENERGY SAVING POSSIBILITIES WITH COOLED-CEILING SYSTEMS , 1995 .

[7]  Dennis L. Loveday,et al.  Designing for thermal comfort in combined chilled ceiling/displacement ventilation environments , 1998 .

[8]  S. Tanabe,et al.  Comfort limits for asymmetric thermal radiation , 1985 .

[9]  Jianlei Niu,et al.  Cooling load dynamics of rooms with cooled ceilings , 1997 .

[10]  Standard Ashrae.  Thermal Environmental Conditions for Human Occupancy , 1992 .

[11]  F. Alamdari.  Displacement ventilation and cooled ceilings , 1998 .

[12]  Henrik Brohus,et al.  Influence of a Cooled Ceiling on Indoor Air Quality in a Displacement Ventilated Room Examined by Means of Computational Fluid Dynamics , 1999 .

[13]  K. A. Antonopoulos,et al.  Experimental evaluation of energy savings in air-conditioning using metal ceiling panels , 1998 .

[14]  Corina Stetiu,et al.  Radiant cooling in US office buildings: Towards eliminating the perception of climate-imposed barriers , 1998 .

[15]  Franc Sodec,et al.  Economic viability of cooling ceiling systems , 1999 .

[16]  T. Kurabuchi,et al.  Cooled ceilings/displacement ventilation hybrid air conditioning system : Design criteria design criteria , 1998 .

[17]  Stanley A. Mumma,et al.  Ceiling Radiant Cooling Panels as a Viable Distributed Parallel Sensible Cooling Technology Integrated with Dedicated Outdoor Air Systems , 2001 .

[18]  Toshiaki Omori,et al.  Thermal comfort and energy consumption of the radiant ceiling panel system.: Comparison with the conventional all-air system , 1999 .

[19]  J. E. Janssen,et al.  Ventilation for acceptable indoor air quality , 1989 .

[20]  Tatsuo Oka,et al.  Performance of radiant cooling system integrated with ice storage , 1999 .

[21]  Helmut E. Feustel,et al.  Hydronic radiant cooling — preliminary assessment☆ , 1995 .