Performance evaluation of a natural convective-cooled concentration solar thermoelectric generator coupled with a spectrally selective high temperature absorber coating

Solar energy can be directly harnessed for power generation by using solar thermoelectric generator (STEG) technology, which comprises of solar absorbers integrated with thermoelectric materials. STEGs behave as solid state heat engines, which can utilize the heat energy of the sun to produce a temperature gradient across a thermoelectric device, which is in turn converted to electrical energy. In this paper, we focus on investigating the performance of the solar absorber subsystem that employs a high temperature spectrally selective coating on a stainless steel substrate. We have performed temperature measurements on the absorber coating exposed to solar irradiation flux at different optical concentration ratios (10–100) and validated the experimental data using a numerical heat transfer model in COMSOL Multiphysics. This has been combined with the high temperature emittance measurements of the coating to develop a predictive efficiency model for the STEG system as a function of the thermoelectric figure of merit at a hot side temperature range of 100–500 °C. Further, we have experimentally examined the performance of a natural convective cooled STEG consisting of a series combination of three commercial Bi2Te3 thermoelectric modules coupled to the selective absorber coating. The maximum power generated from the STEG has been measured at different concentration ratios and the peak efficiency of the system has been calculated in the feasible temperature range of the thermoelectric module.

[1]  G. Boyle.  Renewable Energy: Power for a Sustainable Future , 2012 .

[2]  Jincan Chen.  Thermodynamic analysis of a solar‐driven thermoelectric generator , 1996 .

[3]  Peng Li,et al.  Thermal design and management for performance optimization of solar thermoelectric generator , 2012 .

[4]  V. Badescu.  Spectrally and angularly selective photothermal and photovoltaic converters under one-sun illumination , 2005 .

[5]  Viorel Badescu,et al.  Upper bounds for solar thermophotovoltaic efficiency , 2005 .

[6]  Gang Chen,et al.  Accurate determination of the total hemispherical emittance and solar absorptance of opaque surfaces at elevated temperatures , 2015 .

[7]  Robert A. Taylor,et al.  Recent advances in thermoelectric materials and solar thermoelectric generators – a critical review , 2014 .

[8]  Rajeev J. Ram,et al.  Solar Thermoelectric Generator for Micropower Applications , 2009, Journal of Electronic Materials.

[9]  Kenneth McEnaney,et al.  Modeling of concentrating solar thermoelectric generators , 2011 .

[10]  Ranko Goic,et al.  review of solar photovoltaic technologies , 2011 .

[11]  Craig Turchi,et al.  A High-temperature, High-efficiency Solar Thermoelectric Generator Prototype☆ , 2014 .

[12]  Lauryn L. Baranowski,et al.  Concentrated solar thermoelectric generators , 2012 .

[13]  Pablo del Río,et al.  Assessing the benefits and costs of renewable electricity. The Spanish case , 2013 .

[14]  Andrea Montecucco,et al.  The effect of temperature mismatch on thermoelectric generators electrically connected in series and parallel , 2014 .

[15]  Viorel Badescu,et al.  Thermodynamic theory of thermophotovoltaic solar energy conversion , 2001 .

[16]  Zhixin Chen,et al.  The effects of size and orientation on magnetic properties and exchange bias in Co3O4 mesoporous nanowires , 2011 .

[17]  Viorel Badescu,et al.  Thermal design influence on the performance of solar thermophotovoltaic devices , 2003 .

[18]  Weishu Liu,et al.  High-performance nanostructured thermoelectric materials , 2010 .

[19]  K. Romanjek,et al.  High temperature solar thermoelectric generator – Indoor characterization method and modeling , 2015 .

[20]  Gang Chen,et al.  Theoretical efficiency of solar thermoelectric energy generators , 2011 .

[21]  Frank P. Incropera,et al.  Fundamentals of Heat and Mass Transfer , 1981 .

[22]  Diego-César Alarcón-Padilla,et al.  Theoretical efficiencies of angular-selective non-concentrating solar thermal systems , 2004 .

[23]  H. Barshilia,et al.  Review of physical vapor deposited (PVD) spectrally selective coatings for mid- and high-temperature solar thermal applications , 2012 .

[24]  Gang Chen,et al.  High-performance flat-panel solar thermoelectric generators with high thermal concentration. , 2011, Nature materials.

[25]  W. Beckman,et al.  Solar Engineering of Thermal Processes , 1985 .

[26]  Maria Telkes,et al.  Solar Thermoelectric Generators , 1954 .

[27]  M. M. Kaila,et al.  Solar thermoelectric generation using bismuth telluride alloys , 1980 .

[28]  P. Gardner,et al.  Maximum Power Transfer Theorem: A Simplified Approach , 1998 .

[29]  Peng Li,et al.  Design of a Concentration Solar Thermoelectric Generator , 2010 .

[30]  B. Seraphin.  Solar Energy Conversion , 1979 .