Effect of Ferrite and Grain Boundary Characteristics on Corrosion Properties of Thermal Simulated 316l Heat Affected Zone

[1]  M. Vasudevan,et al.  Study on hot cracking susceptibility of alloy 617M and an analysis on parameters used for its evaluation , 2021, Journal of Manufacturing Processes.

[2]  H. Jing,et al.  Corrosion behavior of the heat affected zone in a 316 L pipeline weld , 2021, Materials Testing.

[3]  Xin Wang,et al.  Effect of NH4+ on the pitting corrosion behavior of 316 stainless steel in the chloride environment , 2021 .

[4]  R. Ballinger,et al.  Study of the corrosion behaviour of sensitized 904L austenitic stainless steel in Cl- solution , 2021 .

[5]  Xiaopeng Li,et al.  Grain boundary engineering of AL6XN super-austenitic stainless steel: Distinctive effects of planar-slip dislocations and deformation twins , 2020 .

[6]  Xiao-qian Fu,et al.  Effect of grain size and its uniformity on corrosion resistance of rolled 316L stainless steel by EBSD and TEM , 2020 .

[7]  I. Muto,et al.  Pit initiation on sensitized Type 304 stainless steel under applied stress: Correlation of stress, Cr-depletion, and inclusion dissolution , 2020 .

[8]  W. Xu,et al.  Unanticipated drastic decline in pitting corrosion resistance of additively manufactured 316L stainless steel after high-temperature post-processing , 2020 .

[9]  L. Qiao,et al.  Coupling effect of microstructure and hydrogen absorbed during service on pitting corrosion of 321 austenitic stainless steel weld joints , 2020 .

[10]  Wei-jie Lu,et al.  Corrosion behaviors of Zr-Sn-Nb-Fe-Mo alloys in pure water at 360 °C/18.6 MPa: Influence of annealing temperature on the anti-corrosion properties , 2020, Corrosion Science.

[11]  D. Engelberg,et al.  Reduction of austenite-ferrite galvanic activity in the heat-affected zone of a Gleeble-simulated grade 2205 duplex stainless steel weld , 2019 .

[12]  S. Hong,et al.  Corrosion resistance of weight reduced AlxCrFeMoV high entropy alloys , 2019, Applied Surface Science.

[13]  Yuanjian Hong,et al.  Anomalous evolution of corrosion behaviour of warm-rolled type 304 austenitic stainless steel , 2019, Corrosion Science.

[14]  D. Kong,et al.  Beneficial effect of reversed austenite on the intergranular corrosion resistance of martensitic stainless steel , 2019, Corrosion Science.

[15]  Ji-chun Yang,et al.  Effect of simulated welding thermal cycles on microstructure and mechanical properties of coarse-grain heat-affected zone of high nitrogen austenitic stainless steel , 2019, Materials Characterization.

[16]  M. Lewandowska,et al.  The effect of grain size and grain boundary misorientation on the corrosion resistance of commercially pure aluminium , 2019, Corrosion Science.

[17]  Li Lin,et al.  Microstructure and Mechanical Properties of Heat-Affected Zone of Repeated Welding AISI 304N Austenitic Stainless Steel by Gleeble Simulator , 2018, Metals.

[18]  X. Ma,et al.  Unmasking chloride attack on the passive film of metals , 2018, Nature Communications.

[19]  W. Zhenhua,et al.  Dependence of corrosion resistance on grain boundary characteristics in a high nitrogen CrMn austenitic stainless steel , 2017 .

[20]  P. Withers,et al.  Strain-induced reactivation of corrosion pits in austenitic stainless steel , 2017 .

[21]  A. Rollett,et al.  Austenite-ferrite interface crystallography dependence of sigma phase precipitation using the five-parameter characterization approach , 2017 .

[22]  M. Ehrensberger,et al.  Effects of simulated inflammation on the corrosion of 316L stainless steel. , 2017, Materials science & engineering. C, Materials for biological applications.

[23]  C. Örnek,et al.  SKPFM measured Volta potential correlated with strain localisation in microstructure to understand corrosion susceptibility of cold-rolled grade 2205 duplex stainless steel , 2015 .

[24]  M. Mazinani,et al.  Effect of grain size on pitting corrosion of 304L austenitic stainless steel , 2015 .

[25]  Tao Zhang,et al.  Effect of Cl− on the Properties of the Passive Films Formed on 316L Stainless Steel in Acidic Solution , 2014 .

[26]  K. Saida,et al.  Precipitation of sigma and chi phases in δ-ferrite of Type 316FR weld metals , 2013 .

[27]  Fu-hui Wang,et al.  Pitting corrosion of 304ss nanocrystalline thin film , 2013 .

[28]  Shuqi Zheng,et al.  Mechanism of (Mg, Al, Ca)-oxide inclusion-induced pitting corrosion in 316L stainless steel exposed to sulphur environments containing chloride ion , 2013 .

[29]  Yong-Soo Park,et al.  Effects of shielding gases on the microstructure and localized corrosion of tube-to-tube sheet welds of super austenitic stainless steel for seawater cooled condenser , 2011 .

[30]  Soon-Hyeok Jeon,et al.  Effects of sulfur addition on pitting corrosion and machinability behavior of super duplex stainless steel containing rare earth metals: Part 2 , 2010 .

[31]  M. Montemor,et al.  Influence of incorporated Mo and Nb on the Mott-Schottky behaviour of anodic films formed on AISI 304L , 2010 .

[32]  N. Parvathavarthini,et al.  Assessment of intergranular corrosion (IGC) in 316(N) stainless steel using electrochemical noise (EN) technique , 2009 .

[33]  J. Pan,et al.  Depletion effects at phase boundaries in 2205 duplex stainless steel characterized with SKPFM and TEM/EDS , 2009 .

[34]  M. Dadfar,et al.  Effect of TIG welding on corrosion behavior of 316L stainless steel , 2007 .

[35]  W. Ding,et al.  Corrosion characteristics of nanostructured layer on 316L stainless steel fabricated by cavitation-annealing , 2006 .

[36]  Fu-hui Wang,et al.  Effects of nanocrystallization on the corrosion behavior of 309 stainless steel , 2006 .

[37]  I. Thompson,et al.  On the relationship between grain boundary connectivity, coincident site lattice boundaries, and intergranular stress corrosion cracking , 2004 .

[38]  D. Landolt,et al.  Passive films on stainless steels—chemistry, structure and growth , 2003 .

[39]  P. Ernst,et al.  Pit growth studies in stainless steel foils. I. Introduction and pit growth kinetics , 2002 .

[40]  H. Berns,et al.  Carbon or nitrogen alloyed quenched and tempered stainless steels : a comparative study , 1996 .

[41]  V. Shankar,et al.  Effect of composition on the transformation of δ-ferrite TO σ in type 316 stainless steel weld metals , 1995 .

[42]  S. W. Thompson,et al.  Fracture and the formation of sigma phase, M23C6, and austenite from delta-ferrite in an AlSl 304L stainless steel , 1994 .

[43]  Hoffmann,et al.  Grain-boundary resistance in polycrystalline metals. , 1986, Physical review letters.

[44]  J. Galvele,et al.  Transport Processes and the Mechanism of Pitting of Metals , 1976 .

[45]  A. Haute,et al.  Analysis of the Influence of Hydrogen on Pitting Corrosion and Stress Corrosion of Austenitic Stainless Steel in Chloride Environment , 1974 .

[46]  J. Andersson,et al.  Investigation on effect of welding parameters on solidification cracking of austenitic stainless steel 314 , 2018 .

[47]  I. Muto,et al.  Local Electrochemistry and In Situ Microscopy of Pitting at Sensitized Grain Boundary of Type 304 Stainless Steel in NaCl Solution , 2017 .

[48]  T. Baudin,et al.  Influence of stored energy on twin formation during primary recrystallization , 2014 .

[49]  S. Yu,et al.  Evaluation of the effect of grain size on chromium carbide precipitation and intergranular corrosion of 316L stainless steel , 2013 .

[50]  R. Akid,et al.  Investigation of intergranular corrosion of 316L stainless steel diffusion bonded joint by electrochemical potentiokinetic reactivation , 2011 .

[51]  T. Watanabe,et al.  An approach to grain boundary design for strong and ductile polycrystals. , 1984 .