Investigations of ultrathin polypyrrole films: Formation and effects of doping/dedoping processes on its optical properties by electrochemical surface plasmon resonance (ESPR)

In the present work an investigation of the effects of the electropolymerization mode on the optical properties associated to the doping/dedoping processes of nanometric films of polypyrrole (PPy) is reported, monitoring in situ and in real time using simultaneously surface plasmon resonance and electrochemical techniques (ESPR). The electropolymerization of pyrrole was performed by potentiostatic, potentiodynamic and galvanostatic methods and the use of the ESPR technique showed that the electropolymerization mode is essential to the stability of polymer and the reversibility of its optical properties during the doping and dedoping processes. Thus, the optical properties of oxidized and reduced film were obtained by nonlinear least square fitting using Fresnel equations for a four-layer system. Then, the values of the real and imaginary parts of the complex dielectric constant for PPy fims were correlated with the polymer doping level. Finally, quartz crystal microbalance measurements were also applied to obtain correlation between doping/dedoping processes and the changes in the real and imaginary parts of the dielectric constant of the polypyrrole film, showing that the doping and dedoping processes in the polypyrrole film can act directly on its optical properties while the ESPR technique can give the same information indirectly.

[1]  In-Hyeong Yeo,et al.  A study on the initial growth of polypyrrole on a gold electrode by electrochemical quartz crystal microbalance , 1997 .

[2]  Yuyuan Tian,et al.  Quantification of Redox-Induced Thickness Changes of 11-Ferrocenylundecanethiol Self-Assembled Monolayers by Electrochemical Surface Plasmon Resonance , 2004 .

[3]  J. Lukkari,et al.  Redox processes in thick films of polypyrrole/dodecylsulfate in the presence of alkali and tetramethylammonium chlorides , 1995 .

[4]  Lauro T Kubota,et al.  Determination of thickness, dielectric constant of thiol films, and kinetics of adsorption using surface plasmon resonance. , 2005, Langmuir : the ACS journal of surfaces and colloids.

[5]  A. Öpik,et al.  Ion transport investigations of polypyrroles doped with different anions by EQCM and CER techniques , 2003 .

[6]  R. Nichols,et al.  An in situ scanning probe microscopy study of copper electrodeposition on conductive polypyrrole , 1995 .

[7]  S. Wang,et al.  High-sensitivity stark spectroscopy obtained by surface plasmon resonance measurement. , 2000, Analytical chemistry.

[8]  Bansi D. Malhotra,et al.  Prospects of conducting polymers in molecular electronics , 2003 .

[9]  W. Knoll,et al.  In Situ Investigations on the Electrochemical Polymerization and Properties of Polyaniline Thin Films by Surface Plasmon Optical Techniques , 2002 .

[10]  C. M. Pettit,et al.  Surface plasmon resonance transients at an electrochemical interface: time resolved measurements using a bicell photodiode , 2003 .

[11]  Yongfang Li,et al.  On the large overpotential of the first reduction of polypyrrole perchlorate films in organic solutions , 1997 .

[12]  T. Imae,et al.  Electrochemical and Optical Properties of the Poly(3,4-ethylenedioxythiophene) Film Electropolymerized in an Aqueous Sodium Dodecyl Sulfate and Lithium Tetrafluoroborate Medium , 2004 .

[13]  R. W. Christy,et al.  Optical Constants of the Noble Metals , 1972 .

[14]  B. P. Sullivan,et al.  In situ surface plasmon study of the electropolymerization of Fe(vbpy)32+ onto a gold surface , 2000 .

[15]  Li Yongfang,et al.  On the nature of redox processes in the cyclic voltammetry of polypyrrole nitrate in aqueous solutions , 1993 .

[16]  R. Georgiadis,et al.  In situ kinetics of self-assembly by surface plasmon resonance spectroscopy , 1996 .

[17]  K. Krischer,et al.  The Fe(CN)63−/Fe(CN)64− charge transfer reaction on Au(111) revisited in the presence and absence of a two-dimensional, condensed organic film , 2003 .

[18]  Wolfgang Knoll,et al.  Polyaniline/gold nanoparticle multilayer films: Assembly, properties, and biological applications , 2004 .

[19]  R. Torresi,et al.  Microgravimetric study of the influence of the solvent on the redox properties of polypyrrol modified electrodes , 2001 .

[20]  A. Entezami,et al.  Controlled release of sulfosalicylic acid during electrochemical switching of conducting polymer bilayers , 2001 .

[21]  Wolfgang Knoll,et al.  Surface plasmon resonance spectroscopy based on evanescent field treatment. , 2004, Analytical chemistry.

[22]  Yuliang Yang,et al.  Preparation, properties and applications of polypyrroles , 2001 .

[23]  Zhiyu Jiang,et al.  Polymerization and redox behavior of polypyrrole (PPy) films by in situ EQCM and PT techniques , 2004 .

[24]  Zhehui Wang,et al.  Electropolymerization and doping/dedoping properties of polyaniline thin films as studied by electrochemical-surface plasmon spectroscopy and by the quartz crystal microbalance , 2004 .

[25]  E. Kretschmann Die Bestimmung optischer Konstanten von Metallen durch Anregung von Oberflächenplasmaschwingungen , 1971 .

[26]  E. Ticianelli,et al.  Spectroscopic ellipsometry investigation of the redox process of polypyrrole in several aqueous solutions , 1998 .

[27]  W. Knoll,et al.  In Situ Investigations of the Electrodeposition and Electrochromic Properties of Poly(3,4-ethylenedioxythiophene) Ultrathin Films by Electrochemical−Surface Plasmon Spectroscopy , 2002 .

[28]  Hideo Tamura,et al.  Polyaniline film-coated electrodes as electrochromic display devices , 1984 .

[29]  N. Munichandraiah,et al.  Analysis of electrochemical impedance of polyaniline films prepared by galvanostatic, potentiostatic and potentiodynamic methods , 2005 .

[30]  D. Schlereth Characterization of protein monolayers by surface plasmon resonance combined with cyclic voltammetry ‘in situ’ , 1999 .

[31]  R. Kötz,et al.  Electron density effects in surface plasmon excitation on silver and gold electrodes , 1977 .

[32]  A. Bard,et al.  Polymer Films on Electrodes XXIV . Ellipsometric Study of the Electrochemical Redox Processes of a Polypyrrole Film on a Platinum Electrode , 1989 .

[33]  A. Epstein,et al.  Application of polyaniline (emeraldine base, EB) in polymer light-emitting devices , 1996 .

[34]  Mu Shaolin,et al.  BIOELECTROCHEMICAL RESPONSES OF THE POLYANILINE GLUCOSE OXIDASE ELECTRODE , 1991 .

[35]  W. Paik,et al.  Ellipsometric studies on polypyrrole and polyaniline , 1997 .

[36]  S. Dong,et al.  Surface plasmon resonance studies on the electrochemical doping/dedoping processes of anions on polyaniline-modified electrode , 2002 .

[37]  S. Dong,et al.  In situ analysis of electropolymerization of aniline by combined electrochemistry and surface plasmon resonance , 2002 .

[38]  A. Bard,et al.  Electrochemical Control of Polyaniline Morphology as Studied by Scanning Tunneling Microscopy , 1991 .

[39]  Akira Baba,et al.  Optical properties of ultrathin poly(3,4-ethylenedioxythiophene) films at several doping levels studied by in situ electrochemical surface plasmon resonance spectroscopy , 2003 .

[40]  G. Inzelt,et al.  Electrochemical quartz crystal microbalance study of the swelling of poly(vinylferrocene) films , 1992 .

[41]  E. Geniés,et al.  ESR study of polyaniline doping at various concentrations of anions , 1997 .

[42]  A. MacDiarmid,et al.  Electrochemical Characteristics of “Polyaniline” Cathodes and Anodes in Aqueous Electrolytes , 1985 .

[43]  R. Torresi,et al.  Ionic exchanges in dodecylbenzenesulfonate-doped polypyrrole Part II: Electrochemical quartz crystal microbalance study , 1995 .

[44]  R. Azzam,et al.  Ellipsometry and polarized light , 1977 .

[45]  N. Oyama,et al.  Coupling between electron and mass transfer kinetics in electroactive polymer films — An application of the in situ quartz crystal electrode , 1995 .

[46]  W. Knoll,et al.  Using Surface Plasmon Resonance and the Quartz Crystal Microbalance to Monitor in Situ the Interfacial Behavior of Thin Organic Films , 2002 .

[47]  Akira Baba,et al.  Combining Surface Plasmon Resonance and Quartz Crystal Microbalance for the in Situ Investigation of the Electropolymerization and Doping/Dedoping of Poly(pyrrole) , 2003 .