Low temperature geothermal energy: heat exchange simulation in aquifers through Modflow/MT3DMS codes

Geothermal energy and in particular low temperature re- sources, have a rising worldwide importance. Ground-Source Heat Pumps (GSHP) have been used increasingly because they are among the cleanest and most energy efficient heating and cooling systems for buildings. Simulation models can be applied for a more effective use of the subsoil for geothermal purposes. In fact they are useful tools for the design of efficient systems considering also the need to avoid abnormal temperature distributions in soil and aquifers. In the hydrogeology field MODFLOW/MT3DMS are the most widespread programs to face environmental problems and to fore- cast quantity and quality impacts on groundwater resources. Al- though MODFLOW/MT3DMS are used to represent open circuit heat pumps, they are hardly used to represent borehole heat exchang- ers (BHE). The aim of this study is to simulate BHEs through two computer codes. The first one is TRNVDSTP, coupled to TRNSYS, which is often used in GSHP design in pure conduction cases. A methodology to take groundwater flow into account was added to TRNVDSTP, but a validation is still missing. The second one is MODFLOW/MT3DMS, suitable for groundwater flow and transport models, but whose reliability in BHE simulation is today unknown. The two software have been compared in terms of predicted ex- changed energy and temperature distribution in the aquifer.

[1]  S. Rees,et al.  A preliminary assessment of the effects of groundwater flow on closed-loop ground source heat pump systems , 2000 .

[2]  Weixing Guo,et al.  MODFLOW/MT3DMS–Based Simulation of Variable‐Density Ground Water Flow and Transport , 2006, Ground water.

[3]  Yang Yao,et al.  A study on the performance of a geothermal heat exchanger under coupled heat conduction and groundwater advection , 2007 .

[4]  Paul P. Wang,et al.  MT3DMS: A Modular Three-Dimensional Multispecies Transport Model for Simulation of Advection, Dispersion, and Chemical Reactions of Contaminants in Groundwater Systems; Documentation and User's Guide , 1999 .

[5]  Jozsef Hecht-Méndez,et al.  Evaluating MT3DMS for Heat Transport Simulation of Closed Geothermal Systems , 2010, Ground water.

[6]  E. Sudicky,et al.  Three-dimensional analysis of variably-saturated flow and solute transport in discretely-fractured porous media , 1996 .

[7]  R. Ooka,et al.  Numerical simulation of ground heat and water transfer for groundwater heat pump system based on real-scale experiment , 2010 .

[8]  John W. Lund,et al.  Direct utilization of geothermal energy 2010 worldwide review , 2011 .

[9]  Wolfram Rühaak,et al.  A new method for modelling geothermal heat exchangers in shallow aquifer systems , 2008 .

[10]  Christian D. Langevin,et al.  Addition of simultaneous heat and solute transport and variable fluid viscosity to SEAWAT , 2006, Comput. Geosci..

[11]  Christian D. Langevin,et al.  MODFLOW-2000, the U.S. Geological Survey Modular Ground-Water Model--Documentation of the SEAWAT-2000 Version with the Variable-Density Flow Process (VDF) and the Integrated MT3DMS Transport Process (IMT) , 2003 .

[12]  Ryuichi Itoi,et al.  Optimizing the design of large-scale ground-coupled heat pump systems using groundwater and heat transport modeling , 2005 .

[13]  Frank P. Incropera,et al.  Fundamentals of Heat and Mass Transfer , 1981 .

[14]  Huajun Wang,et al.  Thermal performance of borehole heat exchanger under groundwater flow: A case study from Baoding , 2009 .

[15]  Arlen W. Harbaugh,et al.  MODFLOW-2000, The U.S. Geological Survey Modular Ground-Water Model - User Guide to Modularization Concepts and the Ground-Water Flow Process , 2000 .

[16]  Arlen W. Harbaugh,et al.  User's documentation for MODFLOW-96, an update to the U.S. Geological Survey modular finite-difference ground-water flow model , 1996 .

[17]  G. Hellström.  Ground heat storage : thermal analyses of duct storage systems , 1991 .

[18]  Daniel Pahud,et al.  The Duct Ground Heat Storage Model (DST) for TRNSYS Used for the Simulation of Heat Exchanger Piles. User Manual, December 1996 Version , 1996 .