A new empirical formula for prediction of fracture energy of concrete based on the artificial neural network

Abstract Assessment of energy needed for crack growth in concrete structures has been an interesting topic since the use of fracture mechanics to concrete. For concrete as a quasi-brittle material, the fracture energy has been demonstrated to be an effective index in the safe design of structures and the failure behavior modeling. Since the nonlinear behavior of concrete in fracture process is very complicated, intensive debates on the precise prediction of fracture energy by means of available estimating formula have never ended. In the present study, a new empirical method to determine the fracture energy of concrete is explored. With an extensive experimental database including 246 fracture tests, a new artificial neural network (ANN) model relating the fracture energy to different effective parameters such as compressive strength, water to cement ratio, maximum aggregate size and age is trained and validated. Using the generalization capabilities of the ANN, an empirical design plot and some correcting equations are extended to make a user-friendly formula to determine the fracture energy of concrete in practical design. Results showed that predicted values from ANN are in rationally good agreement with the experimental data and also ANN give higher accuracy than existing regression models, especially with overcoming the high scattered predictions. The use of the new empirical method as an efficient technique for determining the fracture energy of concrete is thus proved.

[1]  Iman M. Nikbin,et al.  Evaluation of the effect of maximum aggregate size on fracture behavior of self compacting concrete , 2014 .

[2]  Zdeněk P. Bažant,et al.  Statistical prediction of fracture parameters of concrete and implications for choice of testing standard , 2002 .

[3]  Surendra P. Shah,et al.  A METHOD TO PREDICT SHRINKAGE CRACKING OF CONCRETE , 1998 .

[4]  Anthony H. Bryant,et al.  Experimental Tests on Concrete Fracture , 1979 .

[5]  P. Petersson.  Crack growth and development of fracture zones in plain concrete and similar materials , 1981 .

[6]  H. Hilsdorf,et al.  Size Effects in the Experimental Determination of Fracture Mechanics Parameters , 1985 .

[7]  M. F. Kaplan.  Crack Propagation and the Fracture of Concrete , 1961 .

[8]  L. Javier Malvar,et al.  Fracture energy for three point bend tests on single edge notched beams: Proposed evaluation , 1987 .

[9]  B. K. Raghu Prasad,et al.  Fracture energy and softening behavior of high-strength concrete , 2002 .

[10]  Ta-Peng Chang,et al.  Fracture properties of lightweight concrete , 1996 .

[11]  J. L. Lott,et al.  FRACTURE MECHANICS - ITS APPLICABILITY TO CONCRETE , 1972 .

[12]  Ragip Ince,et al.  Determination of concrete fracture parameters based on peak-load method with diagonal split-tension cubes , 2012 .

[13]  Bing Chen,et al.  EFFECT OF AGGREGATE ON THE FRACTURE BEHAVIOR OF HIGH STRENGTH CONCRETE , 2004 .

[14]  A. Hillerborg,et al.  Analysis of crack formation and crack growth in concrete by means of fracture mechanics and finite elements , 1976 .

[15]  Waiching Tang,et al.  Mechanical and fracture properties of normal- and high-strength concretes with fly ash after exposure to high temperatures , 2009 .

[16]  Maria Q. Feng,et al.  Application of neural networks for estimation of concrete strength , 2002 .

[17]  M. R. Davoodi,et al.  Influence of Mineral Powder Content on the Fracture Behaviors and Ductility of Self-Compacting Concrete , 2016 .

[18]  S. Al-Alawi,et al.  Prediction of fracture toughness using artificial neural networks (ANNs) , 1997 .

[19]  M. Elices,et al.  Measurement of the fracture energy using three-point bend tests: Part 3—influence of cutting theP-δ tail , 1992 .

[20]  Sidney Mindess,et al.  The effect of specimen size on the fracture energy of concrete , 1984 .

[21]  J. Y. Kang,et al.  Application of artificial neural network for predicting plain strain fracture toughness using tensile test results , 2006 .

[22]  M. Elices,et al.  Measurement of the fracture energy using three-point bend tests: Part 2—Influence of bulk energy dissipation , 1992 .

[23]  Hosein Naderpour,et al.  Prediction of FRP-confined compressive strength of concrete using artificial neural networks , 2010 .

[24]  Surendra P. Shah,et al.  Two Parameter Fracture Model for Concrete , 1985 .

[25]  Rilem.  FMC 1 Determination of the fracture energy of mortar and concrete by means of three-point bend tests on notched beams , 1985 .

[26]  Farhad Ansari,et al.  Method and theory for nondestructive determination of fracture energy in concrete structures , 1996 .

[27]  Iman M. Nikbin,et al.  The effect of water to cement ratio on fracture parameters and brittleness of self-compacting concrete , 2013 .

[28]  Mohsen Ghaemian,et al.  Large-scale testing on specific fracture energy determination of dam concrete , 2006 .

[29]  Z. Bažant,et al.  FRACTURE PROPERTIES AND BRITTLENESSS OF HIGH-STRENGTH CONCRETE , 1990 .

[30]  Alberto Carpinteri,et al.  Experimental determination of fracture toughness parameters KIC and JIC for aggregative materials , 1981 .

[31]  B. Karihaloo,et al.  Fracture toughness of plain concrete from three-point bend specimens , 1989 .

[32]  Surendra P. Shah,et al.  A Fracture toughness criterion for concrete , 1985 .

[33]  D. François,et al.  Mecanique de la rupture appliquee au beton hydraulique , 1979 .

[34]  G C Lee,et al.  NEURAL NETWORKS TRAINED BY ANALYTICALLY SIMULATED DAMAGE STATES , 1993 .

[35]  Bhushan Lal Karihaloo,et al.  Size effect in concrete beams , 2003 .

[36]  Z. Bažant,et al.  Determination of Fracture Energy from Size Effect and Brittleness Number , 1987 .

[37]  Yacoub M. Najjar,et al.  On the identification of compaction characteristics by neuronets , 1996 .

[38]  A. Goh.  Seismic liquefaction potential assessed by neural networks , 1994 .

[39]  Ricardo Amorim Einsfeld,et al.  Fracture parameters for high-performance concrete , 2006 .

[40]  Lei Shen,et al.  Artificial neural network approach to predict the fracture parameters of the size effect model for concrete , 2015 .

[41]  Ragip Ince,et al.  Prediction of fracture parameters of concrete by Artificial Neural Networks , 2004 .

[42]  Assunta Sorrentino,et al.  Application of Artificial Neural Networks and Probability Ellipse methods for damage detection using Lamb waves , 2015 .

[43]  A. A. Griffith.  The Phenomena of Rupture and Flow in Solids , 1921 .

[44]  B. H. Bharatkumar,et al.  Effect of fly ash and slag on the fracture characteristics of high performance concrete , 2005 .

[45]  Surendra P. Shah,et al.  EFFECT OF HIGH STRENGTH AND RATE OF LOADING ON FRACTURE PARAMETERS OF CONCRETE. , 1987 .

[46]  Jayanta Chattopadhyay,et al.  Investigation on fracture parameters of concrete through optical crack profile and size effect studies , 2015 .

[47]  Wps Dias,et al.  NEURAL NETWORKS FOR PREDICTING PROPERTIES OF CONCRETES WITH ADMIXTURES , 2001 .

[48]  William C. Carpenter,et al.  Common Misconceptions about Neural Networks as Approximators , 1994 .

[49]  Surendra P. Shah,et al.  Simple Method for Determining Material Fracture Parameters From Peak Loads , 1996 .

[50]  William C. Carpenter,et al.  Effect of design selection on response surface performance , 1993 .

[51]  Fereidoun Amini,et al.  Neural Network for Structure Control , 1995 .

[52]  Ragip Ince,et al.  Determination of concrete fracture parameters based on two-parameter and size effect models using split-tension cubes , 2010 .

[53]  James H. Garrett,et al.  Knowledge-Based Modeling of Material Behavior with Neural Networks , 1992 .

[54]  Christopher K.Y. Leung,et al.  Empirical Approach for Determining Ultimate FRP Strain in FRP-Strengthened Concrete Beams , 2006 .