Microstructure and mechanical properties of aluminum alloy composites with endogenous nano-TiCp

[1]  Xiaochun Li,et al.  Influence of Mg on reaction and properties of Al–Si/TiC nanocomposites , 2022, Materials Science and Engineering: A.

[2]  Y. Liu,et al.  Enhanced strength-ductility synergy in a rheo-diecasting semi-solid aluminum alloy , 2021 .

[3]  R. Kolahchi,et al.  Evaluation of tensile strength and elastic modulus of 7075-T6 aluminum alloy by adding SiC reinforcing particles using vortex casting method , 2021 .

[4]  Yanhuai Ding,et al.  Graphene oxide wrapped magnetic nanoparticle composites induced by SiO2 coating with excellent regenerability , 2021, International Journal of Minerals, Metallurgy and Materials.

[5]  Hongxia Wang,et al.  Microstructure evolution and mechanical properties of Mg-9Al-1Si-1SiC composites processed by multi-pass equal-channel angular pressing at various temperatures , 2021, International Journal of Minerals, Metallurgy and Materials.

[6]  Lai‐Chang Zhang,et al.  Unprecedented enhancement in strength-plasticity synergy of (TiC+Al6MoTi+Mo)/Al cermet by multiple length-scale microstructure stimulated synergistic deformation , 2021 .

[7]  Fengchen Chen,et al.  Effect of In addition on the precipitation behavior and mechanical property for Al-Mg-Si alloys , 2021, Journal of Alloys and Compounds.

[8]  O. Ojo,et al.  Effect of TiC nanoparticles on the hot deformation behavior of AA7075 aluminum alloy , 2021, Materials Characterization.

[9]  P. Alizadeh,et al.  Investigation of sintering, crystallization and mechanical properties of silver nanoparticles-reinforced wollastonite glass-ceramic , 2021 .

[10]  Wenshu Yang,et al.  Microstructural evolution and thermal conductivity of diamond/Al composites during thermal cycling , 2021, International Journal of Minerals, Metallurgy and Materials.

[11]  Rong-zhen Liu,et al.  Microstructure and mechanical properties of reaction-bonded B4C-SiC composites , 2021, International Journal of Minerals, Metallurgy and Materials.

[12]  Yongfa Zhu,et al.  Fabrication and properties of silver-based composites reinforced with carbon-coated Ti3AlC2 , 2021, International Journal of Minerals, Metallurgy, and Materials.

[13]  Amauri Garcia,et al.  Comparing the roles of Sb and Bi on microstructures and application properties of the Al-15% Si alloy , 2021 .

[14]  L. Shan,et al.  Microstructure design and strengthening of mechanical properties in Al–Si alloy through 0.05 wt % Ni-base amorphous alloy , 2021, Vacuum.

[15]  Lai‐Chang Zhang,et al.  Additive manufacturing of metallic lattice structures: Unconstrained design, accurate fabrication, fascinated performances, and challenges , 2021, Materials Science and Engineering: R: Reports.

[16]  Z.C. Luo,et al.  Abrasive wear behaviour of TiC-strengthened eutectic high chromium cast iron composites , 2021, Materials Today Communications.

[17]  Abdullah Aslan,et al.  Effect of ball milling time on the structural characteristics and mechanical properties of nano-sized Y2O3 particle reinforced aluminum matrix composites produced by powder metallurgy route , 2021, Advanced Powder Technology.

[18]  Qiang Li,et al.  Insight into solidification microstructure control by trace TiCN–TiB2 particles for yielding fine-tuned nanoprecipitates in a hypoeutectic Al–Si–Mg alloy , 2021, Materials Science and Engineering: A.

[19]  Yijie Zhang,et al.  Understanding of surface segregation of Cu and Zn on nano Si precipitates to the mechanical property improvement of high pressure die casting Al9Si3CuFe alloy , 2021, Journal of Alloys and Compounds.

[20]  Lai‐Chang Zhang,et al.  Corrosion behavior and characteristics of passive films of laser powder bed fusion produced Ti–6Al–4V in dynamic Hank’s solution , 2021 .

[21]  M. Gao,et al.  The response of mechanical property to the microstructure variation of an Al–Mg alloy by adding tin element , 2021 .

[22]  F. Qiu,et al.  Microstructure evolution and mechanical property enhancement of high-Cr hot work die steel manipulated by trace amounts of nano-sized TiC , 2021 .

[23]  Naser A. Alsaleh,et al.  Effect of dispersion of alumina nanoparticles and graphene nanoplatelets on microstructural and mechanical characteristics of hybrid carbon/glass fibers reinforced polymer composite , 2021 .

[24]  Kehong Wang,et al.  In situ synthesized nano-Al4C3 reinforced aluminum matrix composites via friction stir processing , 2021 .

[25]  M. Shamshirsaz,et al.  Synthesis of ex-situ Al5083 reinforced with mechanically-alloyed CNTs and Fe2O3 nanoparticles using friction stir processing , 2021 .

[26]  Xiaoguo Song,et al.  Interface microstructure and formation mechanism of ultrasonic spot welding for Al-Ti dissimilar metals , 2021, International Journal of Minerals, Metallurgy and Materials.

[27]  W. Du,et al.  Interfacial structures and strengthening mechanisms of in situ synthesized TiC reinforced Ti6Al4V composites by selective laser melting , 2021, Ceramics International.

[28]  Zhaofeng Chen,et al.  Mechanical properties and failure mechanism of 3D needle-punched C /SiC–Al composites , 2021, Ceramics International.

[29]  F. Qiu,et al.  Microstructure manipulation and strengthening mechanisms of 40Cr steel via trace TiC nanoparticles , 2021, Materials Science and Engineering: A.

[30]  Xiaodong Sun,et al.  Effect of vanadium content on microstructure and properties of in situ TiC reinforced VxFeCoNiCu multi-principal-element alloy matrix composites , 2021, Journal of Iron and Steel Research International.

[31]  Q. Jiang,et al.  Simultaneously enhanced strength and toughness of cast medium carbon steels matrix composites by trace nano-sized TiC particles , 2021, Materials Science and Engineering: A.

[32]  F. Qiu,et al.  Controlling the sizes of in-situ TiC nanoparticles for high-performance TiC/Al–Cu nanocomposites , 2021 .

[33]  A. Muniappan,et al.  Machinability studies on hybrid nano-SiC and nano-ZrO2 reinforced aluminium hybrid composite by wire-cut electrical discharge machining , 2021, Materials Today: Proceedings.

[34]  X. Zuo,et al.  High strength and high ductility nano-Ni-Al2O3/A356 composites fabricated with nickel-plating and equal channel angle semi-solid extrusion (ECASE) , 2021, Journal of Materials Research and Technology.

[35]  B. Eghbali,et al.  Fabrication and characterization of GNPs and CNTs reinforced Al7075 matrix composites through the stir casting process , 2021, International Journal of Minerals, Metallurgy and Materials.

[36]  C. Shi,et al.  Simultaneously optimizing pore morphology and enhancing mechanical properties of Al-Si alloy composite foams by graphene nanosheets , 2021, Journal of Materials Science & Technology.

[37]  Zunjie Wei,et al.  In situ formation of SiC in Al–40Si alloy during high-pressure solidification , 2021 .

[38]  Z. Cui,et al.  Compressive response and microstructural evolution of in-situ TiB2 particle-reinforced 7075 aluminum matrix composite , 2021 .

[39]  B. Stalin,et al.  Effect of ZrB2 on microstructural, mechanical and corrosion behaviour of aluminium (AA7178) alloy matrix composite prepared by the stir casting route , 2021 .

[40]  Q. Sun,et al.  Realization of synergistic enhancement for fracture strength and ductility by adding TiC particles in wire and arc additive manufacturing 2219 aluminium alloy , 2021 .

[41]  G. Zou,et al.  Solar anti-icing surface with enhanced condensate self-removing at extreme environmental conditions , 2021, Proceedings of the National Academy of Sciences.

[42]  Lai‐Chang Zhang,et al.  Enhancing strength-ductility synergy and mechanisms of Al-based composites by size-tunable in-situ TiB2 particles with specific spatial distribution , 2021, Composites Part B: Engineering.

[43]  Zhaodong Zhang,et al.  Experimental and numerical studies on fabrication of nanoparticle reinforced aluminum matrix composites by friction stir additive manufacturing , 2021 .

[44]  M. Zha,et al.  Effect of large thickness-reduction on microstructure evolution and tensile properties of Mg-9Al-1Zn alloy processed by hard-plate rolling , 2021 .

[45]  Lai‐Chang Zhang,et al.  Interface formation and bonding control in high-volume-fraction (TiC+TiB2)/Al composites and their roles in enhancing properties , 2021 .

[46]  H. Liao,et al.  Joint effect of micro-sized Si particles and nano-sized dispersoids on the flow behavior and dynamic recrystallization of near-eutectic Al–Si based alloys during hot compression , 2021 .

[47]  Yan Ji,et al.  Corrosion resistance and tribological behavior of particles reinforced AZ31 magnesium matrix composites developed by friction stir processing , 2021 .

[48]  Qianqian Sun,et al.  Enhanced grain refinement and mechanical properties of a high–strength Al–Zn–Mg–Cu–Zr alloy induced by TiC nano–particles , 2021 .

[49]  İ. Şavklıyıldız,et al.  Improving mechanical properties of nano-sized TiC particle reinforced AA7075 Al alloy composites produced by ball milling and hot pressing , 2021, Materials Today Communications.

[50]  Qiang Li,et al.  Reaction behaviors and specific exposed crystal planes manipulation mechanism of TiC nanoparticles , 2021 .

[51]  R. Raiszadeh,et al.  Bonding of compound casted Ti/Al bimetal by heat treatment , 2021, International Journal of Minerals, Metallurgy and Materials.

[52]  Tijun Chen,et al.  Overcoming the strength-ductility trade-off of an aluminum matrix composite by novel core-shell structured reinforcing particulates , 2021 .

[53]  G. Ji,et al.  Precipitation strengthening of nano-scale TiC in a duplex low-density steel under near-rapid solidification , 2020, Journal of Iron and Steel Research International.

[54]  Huijun Kang,et al.  Microstructure and enhanced mechanical properties of hybrid-sized B4C particle-reinforced 6061Al matrix composites , 2020, Materials Science and Engineering: A.

[55]  Zhiwei Liu,et al.  Ultrasound-induced distribution of nano-sized TiB2 particles within α-Al grains during solidification of Al-7Si alloy , 2020 .

[56]  M. Niu,et al.  Effect of multilayer graphene/nano-Fe2O3 composite additions on dry sliding wear behavior of titanium matrix composites , 2020 .

[57]  Clement Tom Scaria,et al.  Effect of process parameter on synthesizing of TiC reinforced Al7075 aluminium alloy nano composites , 2020 .

[58]  Yue Zhao,et al.  Microstructure and mechanical properties of in situ (TiC + SiC)/FeCrCoNi high entropy alloy matrix composites , 2020 .

[59]  Xiujuan Li,et al.  Microstructural and performance characterization of in-situ biphasic micro-nano scale (TiB2-TiCx)/Al-Cu-Mg composites with different ceramic and metal ratios designed for compact integration , 2020 .

[60]  Qiang Li,et al.  Processing, multiscale microstructure refinement and mechanical property enhancement of hypoeutectic Al–Si alloys via in situ bimodal-sized TiB2 particles , 2020 .

[61]  M. Ramachandra,et al.  Effect of ZrO2 nano-particles on mechanical and corrosion behaviour of Al2024 alloy , 2020 .

[62]  S. Suresh,et al.  Mechanical and wear Characteristics of Aluminium Alloy 7075 Reinforced with Nano-Aluminium Oxide/ Magnesium Particles by Stir casting Method , 2020 .

[63]  Pallav Gupta,et al.  Effect of CNT and TiC hybrid reinforcement on the micro-mechano-tribo behaviour of aluminium matrix composites , 2020 .

[64]  Qiang Li,et al.  Design of TiC nanoparticles and their morphology manipulating mechanisms by stoichiometric ratios: Experiment and first-principle calculation , 2019, Materials & Design.

[65]  P. Peng,et al.  Effect of reinforcement content and aging treatment on microstructure and mechanical behavior of B4Cp/6061Al composites , 2019, Materials Science and Engineering: A.

[66]  S. Sajjadi,et al.  Exploring the reinforcing effect of TiC and CNT in dual-reinforced Al-matrix composites , 2018, Diamond and Related Materials.

[67]  C. Yang,et al.  A novel high-strength Al-based nanocomposite reinforced with Ti-based metallic glass nanoparticles produced by powder metallurgy , 2018, Materials Science and Engineering: A.

[68]  M. Gupta,et al.  Enhancing thermal and mechanical response of aluminum using nanolength scale TiC ceramic reinforcement , 2018, Ceramics International.

[69]  Qiang Sun,et al.  Al-Ti-C master alloy with nano-sized TiC particles dispersed in the matrix prepared by using carbon nanotubes as C source , 2018, Journal of Alloys and Compounds.

[70]  F. Qiu,et al.  Simultaneously increasing the high-temperature tensile strength and ductility of nano-sized TiCp reinforced Al-Cu matrix composites , 2018 .

[71]  M. C. Perez,et al.  Effect of high energy ball milling on the morphology, microstructure and properties of nano-sized TiC particle-reinforced 6005A aluminium alloy matrix composite , 2017 .

[72]  A. Devaraju,et al.  Influence of volume percentage of NanoTiB2 particles on tribological & mechanical behaviour of 6061-T6 Al alloy nano-surface composite layer prepared via friction stir process , 2017 .

[73]  Pankaj Agarwal,et al.  Effect of TiC particles on the mechanical properties of aluminium alloy metal matrix composites (MMCs) , 2017 .

[74]  Essam R. I. Mahmoud,et al.  Preparation and characterization of squeeze cast-Al–Si piston alloy reinforced by Ni and nano-Al2O3 particles , 2016 .

[75]  F. Qiu,et al.  The nano-sized TiC particle reinforced Al–Cu matrix composite with superior tensile ductility , 2015 .

[76]  D. Qiu,et al.  A mechanism for the poisoning effect of silicon on the grain refinement of Al–Si alloys , 2007 .

[77]  Z. Zhang,et al.  Consideration of Orowan strengthening effect in particulate-reinforced metal matrix nanocomposites: A model for predicting their yield strength , 2006 .

[78]  Mingxing Zhang,et al.  Edge-to-edge matching model for predicting orientation relationships and habit planes—the improvements , 2005 .

[79]  W. Lee,et al.  Ignition phenomena and reaction mechanisms of the self-propagating high-temperature synthesis reaction in the titanium-carbon-aluminum system , 1997 .