Technology alternatives for tapping the pruning residue resource.

Four commercial harvesters were compared with respect to recovery of pruning residues for energy conversion. These harvesters were tested side-by-side on 17 test fields, totaling 15 ha. The test fields consisted of vineyards and apple and pear orchards. The residue yield was between 0.7 and 9 green tonne per hectare, at a moisture content from 37% to 48%. Yield was highest for the orchards, and lowest for vineyards. Harvesters collected the residues and moved them to the roadside at a cost of between 11 and 60€ per green tonne, depending on field conditions and technology choice. Single-pass harvesting was the cheapest, especially if applied through a dedicated tractor and a towed unit with a large integral container. Two-pass harvesting was the most flexible, but also the most expensive: it should be favored only when space, weather or other management constraints limit the application of the other systems.

[1]  Raffaele Spinelli,et al.  Industrial harvesting of olive tree pruning residue for energy biomass. , 2010, Bioresource technology.

[2]  Enrico Cini,et al.  New shredding machine for recycling pruning residuals , 2009 .

[3]  Eldon D. Olsen,et al.  STATISTICAL COMPARISON OF METHODS USED IN HARVESTING WORK STUDIES , 1998 .

[4]  Warren B. Cohen,et al.  Assessment of forest biomass for use as energy. GIS-based analysis of geographical availability and locations of wood-fired power plants in Portugal , 2010 .

[5]  Natascia Magagnotti,et al.  Performance of a mobile mechanical screen to improve the commercial quality of wood chips for energy. , 2011, Bioresource technology.

[6]  Bruce R. Hartsough,et al.  Economics of Harvesting to Maintain High Structural Diversity and Resulting Damage to Residual Trees , 2003 .

[7]  Natascia Magagnotti,et al.  Recovering kiwifruit pruning residues for biomass production. , 2012 .

[8]  Natascia Magagnotti,et al.  Production and quality of biomass fuels from mechanized collection and processing of vineyard pruning residues , 2012 .

[9]  R. Spinelli,et al.  Wood chips size distribution in relation to blade wear and screen use , 2010 .

[10]  Roberto Fratini,et al.  A methodology to anaylse the potential development of biomass-energy sector: an application in Tuscany , 2004 .

[11]  Edwin S. Miyata,et al.  Determining fixed and operating costs of logging equipment. , 1980 .

[12]  Michael E. Salassi,et al.  A spreadsheet-based cost model for sugarcane harvesting systems , 1998 .

[13]  Natascia Magagnotti,et al.  Harvesting vineyard pruning residues for energy use , 2010 .

[14]  Rien Visser,et al.  Analyzing and estimating delays in wood chipping operations. , 2009 .

[15]  A. Grigoriou,et al.  Characterization and utilisation of vine prunings as a wood substitute for particleboard production , 2002 .