Predicting the behaviour of structures under impact loads using geometrically distorted scaled models

Abstract When a scaled structure (model or replica) is used to predict the response of a full-size compound (prototype), the model geometric dimensions should relate to the corresponding prototype dimensions by a single scaling factor. However, owing to manufacturing technical restrictions, this condition cannot be accomplished for some of the dimensions in real structures. Accordingly, the distorted geometry will not comply with the overall geometric scaling factor, infringing the Π theorem requirements for complete dynamic similarity. In the present study, a method which takes geometrical distortions into account is introduced, leading to a model similar to the prototype. As a means to infer the performance of this method, three analytical problems of structures subjected to dynamic loads are analysed. It is shown that the replica developed applying this technique is able to accurately predict the full-size structure behaviour even when the studied models have some of their dimensions severely distorted.

[1]  Kristin L. Wood,et al.  An Advanced Method to Correlate Scale Models With Distorted Configurations , 2005 .

[2]  R. T. Moura,et al.  Impact on HDPE and PVC plates – Experimental tests and numerical simulations , 2010 .

[3]  I. M. Snyman,et al.  Impulsive loading events and similarity scaling , 2010 .

[4]  Marcílio Alves,et al.  Scaling of cylindrical shells under axial impact , 2007 .

[5]  Norman Jones,et al.  Dynamic response of a rigid plastic clamped beam struck by a mass at any point on the span , 1988 .

[6]  S. L. Rice,et al.  Impact strength of materials , 1972 .

[7]  Anthony G. Atkins,et al.  The laws of similitude and crack propagation , 1974 .

[8]  Y. Q. Hu,et al.  Application of response number for dynamic plastic response of plates subjected to impulsive loading , 2000 .

[9]  Y. Me-Bar.  A method for scaling ballistic penetration phenomena , 1997 .

[10]  J. K. Dienes,et al.  A membrane model for the response of thin plates to ballistic impact , 1977 .

[11]  Anthony G. Atkins.  Scaling laws for elastoplastic fracture , 1999 .

[12]  V. J. Skoglund.  Similitude : theory and applications , 1967 .

[13]  W. E. Baker,et al.  Similarity Methods in Engineering Dynamics: Theory and Practice of Scale Modeling , 1973 .

[14]  N. Jones,et al.  Inertia effects in axisymmetrically deformed cylindrical shells under axial impact , 2000 .

[15]  C. R. Calladine,et al.  Inertia and strain-rate effects in a simple plate-structure under impact loading , 1991 .

[16]  Norman Jones,et al.  Impact failure of beams using damage mechanics: Part I—Analytical model , 2002 .

[17]  Lili Wang,et al.  An impact dynamics analysis on a new crashworthy device against ship-bridge collision , 2008 .

[18]  Marcílio Alves,et al.  Scaling the impact of a mass on a structure , 2006 .

[19]  Norman Jones,et al.  Impact failure of beams using damage mechanics: Part II—Application , 2002 .

[20]  Xinghua Shi,et al.  Generalization of response number for dynamic plastic response of shells subjected to impulsive loading , 2001 .

[21]  Ya-Pu Zhao.  Suggestion of a new dimensionless number for dynamic plastic response of beams and plates , 1998 .

[22]  Norman Jones,et al.  Experimental investigation of the scaling laws for metal plates struck by large masses , 1993 .

[23]  Gregory L. Ferguson,et al.  Replica model scaling for high strain-rate events , 1995 .

[24]  Marcílio Alves,et al.  Scaling of structures subject to impact loads when using a power law constitutive equation , 2009 .

[25]  Tomasz Wierzbicki,et al.  How the airplane wing cut through the exterior columns of the World Trade Center , 2003 .

[26]  C. Calladine,et al.  Strain-rate and inertia effects in the collapse of two types of energy-absorbing structure , 1984 .

[27]  Y. Ravalard,et al.  Applying non-direct similitude technique to the dynamic bending collapse of rectangular section tubes , 1994 .

[28]  P. Jiang,et al.  Experimental investigation into scaling laws for conical shells struck by projectiles , 2006 .

[29]  Osamu Muragishi,et al.  A study on collision buffer characteristic of sharp entrance angle bow structure , 2009 .

[30]  Glenn Murphy,et al.  Similitude in engineering , 1950 .

[31]  Daniel Rittel,et al.  Scaling the response of circular plates subjected to large and close-range spherical explosions. Part I: Air-blast loading , 2007 .

[32]  S.T.S. Al-Hassani,et al.  The influence of inertia and strain-rate on large deformation of plate-structures under impact loading , 2001 .

[33]  Marcílio Alves,et al.  Scaling impacted structures , 2004 .

[34]  Tongxi Yu,et al.  A note on a ‘velocity sensitive’ energy-absorbing structure , 1989 .

[35]  Graham Schleyer,et al.  Scaling of pulse loaded mild steel plates with different edge restraint , 2004 .

[36]  Thomas Szirte,et al.  Applied dimensional analysis and modeling , 1997 .

[37]  Norman Jones,et al.  On dimensionless numbers for dynamic plastic response of structural members , 2000 .