Prolongation of lifetime of high temperature proton exchange membrane fuel cells

Abstract In a previous study on the long-term operation of high-temperature proton exchange membrane fuel cells (HT-PEMFCs) with polybenzimidazole (PBI) membranes, it was found that the main cause of the observed decrease in cell voltage with time was phosphoric acid depletion due to evaporation. Based on this result, in the present study, the effects of using a different kind of cell membrane were investigated. Instead of PBI membranes, phosphoric-acid-doped, chemically cross-linked poly(2,5-benzimidazole) (ABPBI) membranes were employed in HT-PEMFCs and long-term power generation tests were carried out. Two separate cells were operated for 1000 and 17,500 h at a temperature of 150 °C and a current density of 0.2 A cm −2 . Their membrane electrode assemblies were then subjected to electron probe microanalysis. The results for the cell operated for 17,500 h were directly compared with those for a cell with a PBI membrane operated for 17,800 h in a previous study, allowing the mechanism of cell performance reduction in HT-PEMFCs to be further elucidated.

[1]  B. Rambabu,et al.  Platinum/tin oxide/carbon cathode catalyst for high temperature PEM fuel cell , 2010 .

[2]  R. Bouchet,et al.  Proton conduction in acid doped polybenzimidazole , 1999 .

[3]  Jingrong Yu,et al.  In Situ Analysis of Performance Degradation of a PEMFC under Nonsaturated Humidification , 2005 .

[4]  Y. Oono,et al.  Influence of the phosphoric acid-doping level in a polybenzimidazole membrane on the cell performance of high-temperature proton exchange membrane fuel cells , 2009 .

[5]  Pedro Gómez-Romero,et al.  Recent Developments on Proton Conduc‐ting Poly(2,5‐benzimidazole) (ABPBI) Membranes for High Temperature Poly‐mer Electrolyte Membrane Fuel Cells , 2005 .

[6]  Liliana A. Diaz,et al.  Water and phosphoric acid uptake of poly [2,5-benzimidazole] (ABPBI) membranes prepared by low and high temperature casting , 2009 .

[7]  Chang-Soo Kim,et al.  Performance of a poly(2,5-benzimidazole) membrane based high temperature PEM fuel cell in the presence of carbon monoxide , 2006 .

[8]  D. Plackett,et al.  High-temperature proton exchange membranes based on polybenzimidazole and clay composites for fuel cells , 2011 .

[9]  S. Chung,et al.  NMR Studies of Mass Transport in High-Acid-Content Fuel Cell Membranes Based on Phosphoric Acid and Polybenzimidazole , 2007 .

[10]  H. Chu,et al.  Transient evolution of carbon monoxide poisoning effect of PBI membrane fuel cells , 2007 .

[11]  P. Donoso.  NMR, conductivity and neutron scattering investigation of ionic dynamics in the anhydrous polymer protonic conductor PEO(H3PO4)x) , 1988 .

[12]  S. Çelik,et al.  The synthesis and characterization of anhydrous proton conducting membranes based on sulfonated poly(vinyl alcohol) and imidazole , 2011 .

[13]  Y. Oono,et al.  Long-term cell degradation mechanism in high-temperature proton exchange membrane fuel cells , 2012 .

[14]  H. R. Kunz,et al.  Operation of PEM fuel cells at 120–150 °C to improve CO tolerance , 2006 .

[15]  P. Gómez‐Romero,et al.  Polymer Electrolyte Fuel Cells Based on Phosphoric Acid-Impregnated Poly(2,5-benzimidazole) Membranes , 2004 .

[16]  P. Cañizares,et al.  A novel titanium PBI-based composite membrane for high temperature PEMFCs , 2011 .

[17]  Yanghua Tang,et al.  Polybenzimidazole-membrane-based PEM fuel cell in the temperature range of 120–200 °C , 2007 .

[18]  Stefan Pischinger,et al.  Development and design of experiments optimization of a high temperature proton exchange membrane fuel cell auxiliary power unit with onboard fuel processor , 2011 .

[19]  L. Ye,et al.  Amphibious hybrid nanostructured proton exchange membranes , 2011 .

[20]  O. Savadogo,et al.  Hydrogen/oxygen polymer electrolyte membrane fuel cells (PEMFCs) based on alkaline-doped polybenzimidazole (PBI) , 2000 .

[21]  B. Desbat,et al.  Solid state protonic conductors: Poly(ethylene imine) sulfates and phosphates , 1988 .

[22]  C. Jegat,et al.  Proton conduction in poly (acrylamide)-acid blends , 1993 .

[23]  Robert F. Savinell,et al.  High temperature proton exchange membranes based on polybenzimidazoles for fuel cells , 2009 .

[24]  Zhigang Shao,et al.  The stability of Pt/C catalyst in H3PO4/PBI PEMFC during high temperature life test , 2007 .

[25]  P. Cañizares,et al.  Enhancement of the fuel cell performance of a high temperature proton exchange membrane fuel cell running with titanium composite polybenzimidazole-based membranes , 2011 .

[26]  N. Islam,et al.  Preparing Gas-Diffusion Layers of PEMFCs with a Dry Deposition Technique , 2005 .

[27]  Y. Oono,et al.  Influence of operating temperature on cell performance and endurance of high temperature proton exchange membrane fuel cells , 2010 .

[28]  Carsten Agert,et al.  Anhydrous proton conducting membranes based on electron-deficient nanoparticles/PBI-OO/PFSA composites for high-temperature PEMFC , 2009 .