Self-powered metal surface anti-corrosion protection using energy harvested from rain drops and wind

Corrosion of metal surfaces, especially ships and cultural relics, is one of the most concerns in asset protection, which costs billions of dollars worldwide each year. For the protection of metal surfaces, cathodic protection (CP) has been widely used as a primary technology. However, the application of the technology results in high energy cost and more serious environmental pollutions. In this work, a self-powered CP system for metal surface protection was designed by utilizing the energy harvested from natural rain drops and wind using a flexible triboelectric nanogenerator (TENG). The TENG power-supplying system can provide a practical energy source for sustainably driving the CP process without using an external power source. Stereoscopic microscopy, AC impedance measurements, polarization test and surface tension testing were used to verify the feasibility of self-powered CP process. Our results indicate that the flexible TENG can produce highly efficient CP system for almost all metallic structures. This work not only demonstrates a highly-simple-fabrication, great-performance and cost-effect approach to protect metal surfaces from corrosion, but also develops a new self-powered electrochemical technique for CP that can be widely used in metal cultural relics, ocean engineering, industry, transportation, and so on.

[1]  C. S. Castro,et al.  Removal of organic compounds from water by activated carbon impregnated with iron oxide: combined action of adsorption and oxidation in the presence of H2O2 , 2009 .

[2]  Jing Zhu,et al.  Electrochemical Cathodic Protection Powered by Triboelectric Nanogenerator , 2014 .

[3]  P. Castro,et al.  THE CORROSION PERFORMANCE OF STEEL AND REINFORCED CONCRETE IN A TROPICAL HUMID CLIMATE. A REVIEW , 1998 .

[4]  W. Whitman,et al.  The Effect of Velocity on the Corrosion of Steel in Sulfuric Acid. , 1923 .

[5]  Jing Xu,et al.  Current distribution in reinforced concrete cathodic protection system with conductive mortar overlay anode , 2009 .

[6]  Barbara Laïk,et al.  α-CuSn bronzes in sulphate medium: Influence of the tin content on corrosion processes , 2013 .

[7]  Caofeng Pan,et al.  Triboelectric-generator-driven pulse electrodeposition for micropatterning. , 2012, Nano letters.

[8]  Zhong Lin Wang,et al.  Progress in nanogenerators for portable electronics , 2012 .

[9]  Jiang Yuan,et al.  Characterization of Sol‐Gel‐Derived TiO2 Coatings and Their Photoeffects on Copper Substrates , 1995 .

[10]  Zhong Lin Wang,et al.  In situ quantitative study of nanoscale triboelectrification and patterning. , 2013, Nano letters.

[11]  D. Draẑić,et al.  Anomalous dissolution of metals and chemical corrosion , 2005 .

[12]  Zhong Lin Wang,et al.  Triboelectric nanogenerator built inside shoe insole for harvesting walking energy , 2013 .

[13]  Zhong Lin Wang,et al.  Linear-grating triboelectric generator based on sliding electrification. , 2013, Nano letters.

[14]  Andrew G. Glen,et al.  APPL , 2001 .

[15]  A. Fujishima,et al.  Photoelectrochemical Anticorrosion and Self-Cleaning Effects of a TiO2 Coating for Type 304 Stainless Steel , 2001 .

[16]  Zhong Lin Wang,et al.  Sliding-triboelectric nanogenerators based on in-plane charge-separation mechanism. , 2013, Nano letters.

[17]  Jing Li,et al.  Low-temperature hydrothermal formation of a net-like structured TiO2 film and its performance of photogenerated cathode protection , 2008 .

[18]  Jianjun Luo,et al.  Highly transparent and flexible triboelectric nanogenerators: performance improvements and fundamental mechanisms , 2014 .

[19]  Zhong Lin Wang,et al.  Flexible triboelectric generator , 2012 .

[20]  Woonbong Hwang,et al.  Triboelectric nanogenerator for harvesting pendulum oscillation energy , 2013 .

[21]  Y. Higashiyama,et al.  RECENT PROGRESS IN ELECTROSTATIC SEPARATION TECHNOLOGY , 1998 .

[22]  J. Pan,et al.  EIS analysis on chloride-induced corrosion behavior of reinforcement steel in simulated carbonated concrete pore solutions , 2013 .

[23]  Zhong Lin Wang,et al.  Enhancing the performance of triboelectric nanogenerator through prior-charge injection and its application on self-powered anticorrosion , 2014 .

[24]  Raghuvir Singh,et al.  Corrosion degradation and prevention by surface modification of biometallic materials , 2007, Journal of materials science. Materials in medicine.

[25]  Florian Mansfeld,et al.  Tafel slopes and corrosion rates obtained in the pre-Tafel region of polarization curves , 2005 .

[26]  Jung-Gu Kim,et al.  Development of high-driving potential and high-efficiency Mg-based sacrificial anodes for cathodic protection , 2000 .

[27]  Piero Baglioni,et al.  Calcium hydroxide nanoparticles for the conservation of cultural heritage: new formulations for the deacidification of cellulose-based artifacts , 2014 .

[28]  M. Cheung,et al.  Application of cathodic protection for controlling macrocell corrosion in chloride contaminated RC structures , 2013 .

[29]  Chuan Yi Tang,et al.  A 2.|E|-Bit Distributed Algorithm for the Directed Euler Trail Problem , 1993, Inf. Process. Lett..

[30]  Zhong Lin Wang,et al.  Finger typing driven triboelectric nanogenerator and its use for instantaneously lighting up LEDs , 2013 .

[31]  N. S. Rengaswamy,et al.  A review of differing approaches used to estimate the cost of corrosion (and their relevance in the development of modern corrosion prevention and control strategies) , 2005 .

[32]  S. Prati,et al.  Chinese archaeological artefacts: Microstructure and corrosion behaviour of high-leaded bronzes , 2014 .

[33]  G. G. Stokes.  "J." , 1890, The New Yale Book of Quotations.

[34]  Giovanni E. Gigante,et al.  Corrosion of Bronzes by Extended Wetting with Single versus Mixed Acidic Pollutants , 2014, Materials.

[35]  Jun Chen,et al.  Harmonic‐Resonator‐Based Triboelectric Nanogenerator as a Sustainable Power Source and a Self‐Powered Active Vibration Sensor , 2013, Advanced materials.