Dual-band Notched Ultra-Wideband Microstrip Antenna with Integrated Bluetooth band

In this paper, a novel design of ultra-wide band microstrip antenna with dual-band notched at WiMAX and WLAN bands is presented. The proposed antenna consists of a patch antenna, three gradual steps connected to the end of the feed line and a partial ground plane with a trapezoidal slit. Two U-shaped slots were etched on the antenna to reject the WLAN band with a sharp rejection at the start of the band. A coupled C-shaped resonator was placed along the microstrip feed line to reject the WiMAX band. Also, the antenna supports the Bluetooth operating band. The fabricated antenna operates from 2.05 GHz to 14.01GHz except at the notched WiMAX and WLAN bands. There is a good agreement between the simulated and the experimental results.

[1]  A dual-band notched ultra wideband microstrip antenna , 2017, 2017 IEEE International Symposium on Antennas and Propagation & USNC/URSI National Radio Science Meeting.

[2]  Kumar Vaibhav Srivastava,et al.  A Compact Microstrip-Fed Triple Band-Notched UWB Monopole Antenna , 2014, IEEE Antennas and Wireless Propagation Letters.

[3]  Cheng Zhou,et al.  A novel compact ultra wideband antenna having dual frequency band-notched function , 2016, 2016 IEEE International Conference on Microwave and Millimeter Wave Technology (ICMMT).

[4]  Coplanar waveguide fed ultra-wide band printed slot antenna with dual band-notch characteristics , 2017, 2017 8th Annual Industrial Automation and Electromechanical Engineering Conference (IEMECON).