Fault tolerance properties and motion planning of a six-legged robot with multiple faults

SUMMARY The six-legged robot Octopus is designed for nuclear disaster relief missions. When the robot suffers from failures, its performance can be significantly affected. Thus, fault tolerance is essential for walking and operating in environments inaccessible to humans. The current fault-tolerant gaits for legged robots usually either initially lock the entire broken leg or just abandon the broken leg, but then fail to take full advantage of the normal actuators on the broken leg and add extra constraints. As the number of broken legs increases, the robot will no longer be able to walk using the existing fault-tolerant gaits. To solve this problem, screw theory is used for analyzing the remaining mobility after failure. Based on the analysis, a method of motion planning through fault-tolerant Jacobian matrices, which are linear, is presented. This method can enable the robot to accomplish desired movement using broken legs along with other certain concomitant motions as compensation. Finally, experiments and simulations of multiple faults demonstrate the real effects on the Octopus robot.

[1]  K. H. Hunt,et al.  Kinematic geometry of mechanisms , 1978 .

[2]  J. M. Selig.  Geometric Fundamentals of Robotics , 2004, Monographs in Computer Science.

[3]  Jung-Min Yang,et al.  A strategy of optimal fault tolerant gait for the hexapod robot in crab walking , 1998, Proceedings. 1998 IEEE International Conference on Robotics and Automation (Cat. No.98CH36146).

[4]  Jung-Min Yang,et al.  A fault tolerant gait for a hexapod robot over uneven terrain , 2000, IEEE Trans. Syst. Man Cybern. Part B.

[5]  Shigeo Hirose,et al.  Three-legged walking for fault tolerant locomotion of a quadruped robot with demining mission , 2000, Proceedings. 2000 IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS 2000) (Cat. No.00CH37113).

[6]  L. Tsai,et al.  Jacobian Analysis of Limited-DOF Parallel Manipulators , 2002 .

[7]  Wan Kyun Chung,et al.  Analytic Formulation of Reciprocal Screws and Its Application to Nonredundant Robot Manipulators , 2003 .

[8]  Jung-Min Yang.  Crab walking of quadruped robots with a locked joint failure , 2003, Adv. Robotics.

[9]  Jung-Min Yang,et al.  Fault Tolerance in Crab Walking of Quadruped Robots , 2003, MLMTA.

[10]  Charles W Stammers,et al.  Standardisation of Terminology , 2003 .

[11]  J. M. Selig.  Geometric Fundamentals of Robotics (Monographs in Computer Science) , 2004 .

[12]  Jung-Min Yang.  Fault-tolerant crab gaits and turning gaits for a hexapod robot , 2006, Robotica.

[13]  Jung-Min Yang.  Tripod gaits for fault tolerance of hexapod walking machines with a locked joint failure , 2005, Robotics Auton. Syst..

[14]  Lihui Wang,et al.  Smart Devices and Machines for Advanced Manufacturing , 2008 .

[15]  Jung-Min Yang.  Omnidirectional walking of legged robots with a failed leg , 2008, Math. Comput. Model..

[16]  Alberto Rovetta,et al.  Analysis of typical locomotion of a symmetric hexapod robot , 2009, Robotica.

[17]  Jung-Min Yang.  Fault-Tolerant Gait Planning for a Hexapod Robot Walking over Rough Terrain , 2009, J. Intell. Robotic Syst..

[18]  R. A. Russell,et al.  Adaptable gait generation for autotomised legged robots , 2010, ICRA 2010.

[19]  Zhiying Wang,et al.  Locomotion Analysis of Hexapod Robot , 2010 .

[20]  Zhiying Wang,et al.  Mobility analysis of the typical gait of a radial symmetrical six-legged robot , 2011 .

[21]  Eui-Jik Kim,et al.  Queuing Analysis for IEEE 802.11e Networks in Non-Saturation Environments: , 2012 .

[22]  Umar Asif.  Improving the Navigability of a Hexapod Robot using a Fault-Tolerant Adaptive Gait , 2012 .

[23]  Feng Gao,et al.  Spring Parameters Design for the New Hydraulic Actuated Quadruped Robot , 2014 .

[24]  Feng Gao,et al.  A new six-parallel-legged walking robot for drilling holes on the fuselage , 2014 .

[25]  Hui Du,et al.  Fault tolerance criteria and walking capability analysis of a novel parallel-parallel hexapod break walking robot , 2016, Robotica.

[26]  Qiao Sun,et al.  A quadruped robot with parallel mechanism legs , 2014, 2014 IEEE International Conference on Robotics and Automation (ICRA).

[27]  Feng Gao,et al.  Mechanism topology design for novel parallel-parallel hexapod robot , 2014, 2014 UKACC International Conference on Control (CONTROL).

[28]  Feng Gao,et al.  Gait planning for a quadruped robot with one faulty actuator , 2015 .

[29]  Feng Gao,et al.  External disturbance identification of a quadruped robot with parallel–serial leg structure , 2016 .