Powder-binder separation in injection moulded green parts

[1]  Rainer Gadow,et al.  Engineering of high performance injection moulded ceramic components by Polarised Light Optical Texture Analysis (PLOTA) , 2009 .

[2]  T. Moritz,et al.  X-ray computed tomography for characterization of powder injection molded ceramic green parts , 2008, 2008 IEEE Nuclear Science Symposium Conference Record.

[3]  N. Chuankrerkkul,et al.  Flow and void formation in powder injection moulding feedstocks made with PEG/PMMA binders Part 2 – Slip band model , 2008 .

[4]  J. Bridgwater,et al.  Debinding and sintering defects from particle orientation in ceramic injection moulding , 1996 .

[5]  Hideo Takahashi,et al.  Characterization of Particle Packing in an Injected Molded Green Body , 1995 .

[6]  Howard A. Barnes,et al.  A review of the slip (wall depletion) of polymer solutions, emulsions and particle suspensions in viscometers: its cause, character, and cure , 1995 .

[7]  D. C. Hill,et al.  Binder Evolution from Powder Compacts: Thermal Profile for Injection‐Molded Articles , 1989 .

[8]  J. Bridgwater,et al.  The orientation of binders and particles during ceramic injection moulding , 1997 .

[9]  Jrg Evans.  Particle contact before firing , 1997 .

[10]  Hideo Takahashi,et al.  Characterization of micro- and macrostructure of injection-molded green body by liquid immersion method , 1997 .

[11]  D. Kalyon,et al.  Flow instabilities in capillary flow of concentrated suspensions , 1994 .

[12]  R. German.  Homogeneity Effects on Feedstock Viscosity in Powder Injection Molding , 1994 .

[13]  E. Uhland.  Modell zur Beschreibung des Fließens wandgleitender Substanzen durch Düsen , 1976 .