Predicting the Optimal Performance of a Concentrated Solar Segmented Variable Leg Thermoelectric Generator Using Neural Networks

The production of high-performing thermoelectrics is limited by the high computational energy and time required by the current finite element method solvers that are used to analyze these devices. This paper introduces a new concentrating solar thermoelectric generator made of segmented materials that have non-uniform leg geometry to provide high efficiency. After this, the optimum performance of the device is obtained using the finite element method conducted using ANSYS software. Finally, to solve the high energy and time requirements of the conventional finite element method, the data generated by finite elements are used to train a regressive artificial neural network with 10 neurons in the hidden layer. Results are that the power and efficiency obtained from the optimized device design are 3× and 2× higher than the original unoptimized device design. Furthermore, the developed neural network has a high accuracy of 99.95% in learning the finite element data. Finally, the neural network predicts the modified device performance about 800× faster than the conventional finite element method. Overall, the paper provides insights into how thermoelectric manufacturing companies can harness the power of artificial intelligence to design very high-performing devices while saving time and cost.

[1]  Chika C. Maduabuchi.  Thermo-mechanical optimization of thermoelectric generators using deep learning artificial intelligence algorithms fed with verified finite element simulation data , 2022, Applied Energy.

[2]  Yuxiao Zhu,et al.  Artificial neural network enabled accurate geometrical design and optimisation of thermoelectric generator , 2022, Applied Energy.

[3]  Chika C. Maduabuchi.  Improving the performance of a solar thermoelectric generator using nano-enhanced variable area pins , 2022, Applied Thermal Engineering.

[4]  Wen-Tao Li,et al.  Multi-parameter optimization and uncertainty analysis of multi-stage thermoelectric generator with temperature-dependent materials , 2021, Energy Reports.

[5]  Ya Ge,et al.  Geometric optimization of segmented thermoelectric generators for waste heat recovery systems using genetic algorithm , 2021 .

[6]  Jatin Nathwani,et al.  Artificial intelligence application for the performance prediction of a clean energy community , 2021 .

[7]  Iqbal H. Sarker.  Deep Learning: A Comprehensive Overview on Techniques, Taxonomy, Applications and Research Directions , 2021, SN Computer Science.

[8]  Carlos Alberto Badillo-Ruiz,et al.  Transient thermal behavior of a segmented thermoelectric cooler with variable cross‐sectional areas , 2021, International Journal of Energy Research.

[9]  C. Ozoegwu,et al.  The Combined Impacts of Leg Geometry Configuration and Multi-Staging on the Exergetic Performance of Thermoelectric Modules in a Solar Thermoelectric Generator , 2021, Journal of Energy Resources Technology.

[10]  C. Mgbemene,et al.  Overall performance optimisation of tapered leg geometry based solar thermoelectric generators under isoflux conditions , 2021, Journal of Power Sources.

[11]  C. Mgbemene,et al.  Effects of leg geometry and multistaging of thermoelectric modules on the performance of a photovoltaic‐thermoelectric system using different photovoltaic cells , 2021, International Journal of Energy Research.

[12]  Kaifa Wang,et al.  Fast and Accurate Performance Prediction and Optimization of Thermoelectric Generators with Deep Neural Networks , 2021, Advanced Materials Technologies.

[13]  Xuejiang Wang,et al.  An optimized design approach concerning thermoelectric generators with frustum-shaped legs based on three-dimensional multiphysics model , 2021 .

[14]  Tae Young Kim,et al.  Prediction of System-Level Energy Harvesting Characteristics of a Thermoelectric Generator Operating in a Diesel Engine Using Artificial Neural Networks , 2021, Energies.

[15]  C. Mgbemene,et al.  Solar power generation using a two‐stage X‐leg thermoelectric generator with high‐temperature materials , 2021, International Journal of Energy Research.

[16]  Xiaodong Liu,et al.  A renewable energy forecasting and control approach to secured edge-level efficiency in a distributed micro-grid , 2021, Cybersecur..

[17]  T. Maiti,et al.  Device modeling and performance optimization of thermoelectric generators under isothermal and isoflux heat source condition , 2020 .

[18]  Carlos Alberto Badillo-Ruiz,et al.  A comprehensive analysis on nanostructured materials in a thermoelectric micro-system based on geometric shape, segmentation structure and load resistance , 2020, Scientific Reports.

[19]  S. LeBlanc,et al.  The Influence of Leg Shape on Thermoelectric Performance Under Constant Temperature and Heat Flux Boundary Conditions , 2020, Frontiers in Materials.

[20]  Wei Hsin Chen,et al.  Geometry design for maximizing output power of segmented skutterudite thermoelectric generator by evolutionary computation , 2020 .

[21]  C. Mgbemene,et al.  Thermally Induced Delamination of PV-TEG: Implication of Leg’s Joule and Thomson Heating , 2020, Journal of Electronic Materials.

[22]  C. Mgbemene,et al.  Numerical Study of a Phase Change Material Integrated Solar Thermoelectric Generator , 2020, Journal of Electronic Materials.

[23]  Fuxin Niu,et al.  Solar radiation prediction using recurrent neural network and artificial neural network: A case study with comparisons , 2020 .

[24]  Moo-Yeon Lee,et al.  Power Generation, Efficiency and Thermal Stress of Thermoelectric Module with Leg Geometry, Material, Segmentation and Two-Stage Arrangement , 2020, Symmetry.

[25]  Zihan Meng,et al.  A Comprehensive Study on X-Type Thermoelectric Generator Modules , 2020, Journal of Electronic Materials.

[26]  K. F. Wang,et al.  Performance evaluation and lifetime prediction of a segmented photovoltaic-thermoelectric hybrid system , 2020 .

[27]  Guiqiang Li,et al.  Electrical and mechanical analysis of a segmented solar thermoelectric generator under non-uniform heat flux , 2020, Energy.

[28]  Jae-Hyeong Seo,et al.  Artificial Neural Network and Adaptive Neuro-Fuzzy Interface System Modelling to Predict Thermal Performances of Thermoelectric Generator for Waste Heat Recovery , 2020, Symmetry.

[29]  Yi Fan,et al.  Comprehensive study and optimization of concentrated photovoltaic-thermoelectric considering all contact resistances , 2020, Energy Conversion and Management.

[30]  Yuanwen Gao,et al.  Numerical analysis on the segmented annular thermoelectric generator for waste heat recovery , 2019, Energy.

[31]  S. LeBlanc,et al.  The impact of thermoelectric leg geometries on thermal resistance and power output , 2019, Journal of Applied Physics.

[32]  O. I. Ibeagwu.  Modelling and comprehensive analysis of TEGs with diverse variable leg geometry , 2019, Energy.

[33]  Shahab Mehraeen,et al.  Survey of energy scavenging for wearable and implantable devices , 2019, Energy.

[34]  Somchai Wongwises,et al.  Performance prediction of hybrid thermoelectric generator with high accuracy using artificial neural networks , 2019, Sustainable Energy Technologies and Assessments.

[35]  Guiqiang Li,et al.  High performance and thermal stress analysis of a segmented annular thermoelectric generator , 2019, Energy Conversion and Management.

[36]  Chang Nyung Kim,et al.  Effects of the cross‐sectional area ratios and contact resistance on the performance of a cascaded thermoelectric generator , 2019, International Journal of Energy Research.

[37]  A. Rezania,et al.  Transient behavior of concentrated solar oxide thermoelectric generator , 2019, Energy.

[38]  S. Mahmoudinezhad,et al.  Numerical parametric study on the performance of CPV-TEG hybrid system , 2019, Energy Procedia.

[39]  Guiqiang Li,et al.  Comparative analysis of thermoelectric elements optimum geometry between photovoltaic-thermoelectric and solar thermoelectric , 2019, Energy.

[40]  Yi Wu,et al.  An approximate and efficient characterization method for temperature-dependent parameters of thermoelectric modules , 2019, Energy Conversion and Management.

[41]  Eckhard Müller,et al.  TEG Design for Waste Heat Recovery at an Aviation Jet Engine Nozzle , 2018, Applied Sciences.

[42]  Xiao-dong Wang,et al.  A new design of solar thermoelectric generator with combination of segmented materials and asymmetrical legs , 2018, Energy Conversion and Management.

[43]  Harish C. Barshilia,et al.  Experimental analysis and evaluation of a vacuum enclosed concentrated solar thermoelectric generator coupled with a spectrally selective absorber coating , 2018 .

[44]  Shuang-Ying Wu,et al.  Conceptual design and performance analysis of concentrated solar‐driven TIC/AMTEC/TEG hybrid system , 2018, International Journal of Energy Research.

[45]  C. G. Ozoegwu,et al.  The solar energy assessment methods for Nigeria: The current status, the future directions and a neural time series method , 2018, Renewable & Sustainable Energy Reviews.

[46]  Roop L. Mahajan,et al.  Combinatory Finite Element and Artificial Neural Network Model for Predicting Performance of Thermoelectric Generator , 2018, Energies.

[47]  C. Mo,et al.  Structural Reliability Evaluation of Thermoelectric Generator Modules: Influence of End Conditions, Leg Geometry, Metallization, and Processing Temperatures , 2018, Journal of Electronic Materials.

[48]  S. C. Kaushik,et al.  Performance Analysis and Optimization of Concentrating Solar Thermoelectric Generator , 2018, Journal of Electronic Materials.

[49]  S. C. Kaushik,et al.  Thermodynamic modelling and performance optimization of trapezoidal thermoelectric cooler using genetic algorithm , 2018 .

[50]  A. Attar,et al.  Optimal Design of an Automotive Exhaust Thermoelectric Generator , 2018, Journal of Electronic Materials.

[51]  B. Yilbas,et al.  Segmented thermoelectric generator: exponential area variation in leg , 2018 .

[52]  J. Ji,et al.  Optimizing on thermoelectric elements footprint of the photovoltaic-thermoelectric for maximum power generation , 2017 .

[53]  Yu Yao,et al.  The real-time study of solar thermoelectric generator , 2017 .

[54]  Abdulmunaem Elarusi,et al.  Theoretical Approach to Predict the Performance of Thermoelectric Generator Modules , 2017, Journal of Electronic Materials.

[55]  Qingjie Zhang,et al.  Geometry Optimization of a Segmented Thermoelectric Generator Based on Multi-parameter and Nonlinear Optimization Method , 2017, Journal of Electronic Materials.

[56]  James Loomis,et al.  Concentrating solar thermoelectric generators with a peak efficiency of 7.4% , 2016, Nature Energy.

[57]  K. Mossi,et al.  Influence of leg sizing and spacing on power generation and thermal stresses of thermoelectric devices , 2015 .

[58]  Eduardo F. Fernández,et al.  Multiphysics simulations of a thermoelectric generator , 2015 .

[59]  Qi Wang,et al.  A review of thermoelectrics research – Recent developments and potentials for sustainable and renewable energy applications , 2014 .

[60]  K. Woodbury,et al.  Optimization of a cooling system based on Peltier effect for photovoltaic cells , 2013 .

[61]  Y. Miyazaki,et al.  Preparation of Higher Manganese Silicide (HMS) bulk and Fe-containing HMS bulk using a Na–Si Melt and their thermoelectrical properties , 2011 .

[62]  Qiang Chen,et al.  Thermoelectric-Generator-Based DC–DC Conversion Networks for Automotive Applications , 2011 .

[63]  Gilles Notton,et al.  Modelling of a double-glass photovoltaic module using finite differences , 2005 .

[64]  Seunghwa Ryu,et al.  Neural network-assisted optimization of segmented thermoelectric power generators using active learning based on a genetic optimization algorithm , 2022, Energy Reports.

[65]  Qiuyi Su.  Modeling and simulation of a segmented thermoelectric generator , 2017 .

[66]  K. Tsuchiya,et al.  Nano-micro-porous skutterudites with 100% enhancement in ZT for high performance thermoelectricity , 2017 .

[67]  Andrew A. O. Tay,et al.  Stress Analysis of Silicon Wafer-Based Photovoltaic Modules Under IEC 61215 Mechanical Load Test , 2013 .