Design method of freeform off-axis reflective imaging systems with a direct construction process.

In this paper, a novel method is proposed to design the freeform off-axis reflective imaging systems. A special algorithm is demonstrated to calculate the data points on the unknown freeform surface using the rays from multiple fields and different pupil coordinates. These points are used to construct the multiple three-dimensional freeform surfaces in an imaging system which works for a certain object size and a certain width of light beam. An unobscured design with freeform surfaces can be obtained directly with this method, and it can be taken as a good starting point for further optimization. The benefit of this design method is demonstrated by designing a freeform off-axis three-mirror imaging system with high performance and system specifications. The final system operates at F/1.49 with a 64mm entrance pupil diameter and an 8° × 9° field-of-view (FOV). The performance of the system is diffraction limited at LWIR (long-wavelength-infrared).

[1]  Hugo Thienpont,et al.  Analytic design method for optimal imaging: coupling three ray sets using two free-form lens profiles. , 2012, Optics express.

[2]  John Rice. Rogers,et al.  ABERRATIONS OF UNOBSCURED REFLECTIVE OPTICAL SYSTEMS. , 1983 .

[3]  John W. Figoski.  Aberration Characteristics Of Nonsymmetric Systems , 1986, Other Conferences.

[4]  E. Wolf,et al.  On the Theory of Aplanatic Aspheric Systems , 1949 .

[5]  J. Michael Rodgers.  Unobscured mirror designs , 2002, International Optical Design Conference.

[6]  R Andrew Hicks,et al.  Controlling a ray bundle with a free-form reflector. , 2008, Optics letters.

[7]  K. Thompson,et al.  A new family of optical systems employing φ-polynomial surfaces. , 2011, Optics express.

[8]  K. Thompson.  Description of the third-order optical aberrations of near-circular pupil optical systems without symmetry. , 2005, Journal of the Optical Society of America. A, Optics, image science, and vision.

[9]  Xu Liu,et al.  Distortion correction for imaging on non-planar surface using freeform lens , 2012 .

[10]  Wang Lin,et al.  An application of the SMS method for imaging designs. , 2009, Optics express.

[11]  Yi Luo,et al.  Discontinuous free-form lens design for prescribed irradiance. , 2007, Applied optics.

[12]  Guofan Jin,et al.  Design method of surface contour for a freeform lens with wide linear field-of-view. , 2013, Optics express.

[13]  Yongtian Wang,et al.  Free form optical system design with differential equations , 2010, SPIE/COS Photonics Asia.

[14]  Jacob Rubinstein,et al.  Reconstruction of Optical Surfaces from Ray Data , 2001 .

[15]  David J. Knapp,et al.  Conformal optical design , 2002 .