Computational investigation and passive control of vehicle sunroof buffeting

A computational fluid dynamics simulation method based on large eddy simulation is presented and applied to compute the sunroof buffeting of a sport utility vehicle. The simulation result, i.e. the buffeting level curve, coincides well with the road test. The simulation method is then employed to investigate the sunroof buffeting of a vehicle during the development process in the range of 30 km/h–90 km/h. The results show that the most severe sunroof buffeting occurs at 70 km/h, which corresponds to the resonant frequency of the cabin. Flow field visualizations reveal that strong pressure fluctuations are generated inside the cabin due to vortex shedding from the leading edge and impinging onto the trailing edge of the sunroof opening, which explains the mechanism of sunroof buffeting. A new deflector with a gap and a notched upper edge is designed to replace the original castle type deflector. The simulation results show that the newly designed deflector can reduce the buffeting level to 97.9 dB; that is, the sunroof buffeting is completely eliminated. Moreover, the phenomenon of sunroof buffeting reduction is explained by comparing and analyzing the flow field between the newly designed deflector and the original deflector.

[1]  Hyung-Seok Kook,et al.  Visualization of periodic flows over a sunroof opening by using a phase-marked PIV measurement , 2008 .

[2]  Nicholas Oettle,et al.  A Computational Approach to Assess Buffeting and Broadband Noise Generated by a Vehicle Sunroof , 2015 .

[3]  Kennth J. Karbon,et al.  Computational aeroacoustics applications in automotive design , 2001 .

[4]  Raghavendra Singh,et al.  Simulation and Design of Au-tomobile Sunroof Buffeting Noise Control , 2002 .

[5]  Hyung-Seok Kook,et al.  Development of an active deflector system for sunroof buffeting noise control , 2014 .

[6]  Yiping Wang,et al.  Numerical analysis and passive control of a car side window buffeting noise based on Scale-Adaptive Simulation , 2014 .

[7]  Yiping Wang,et al.  Experimental and Numerical Study of Flow over a Cavity for Reduction of Buffeting Noise , 2012 .

[8]  Chang-Fa An,et al.  Impact of Cavity on Sunroof Buffeting: A Two Dimensional CFD Study , 2004 .

[9]  Zhenyu Wang,et al.  A Numerical Study of Trailing Edge Serrations on Sunroof Buffeting Noise Reduction , 2017 .

[10]  S. R. Chakravarthy,et al.  Computational Study of Resonance Suppression of Open Sunroofs , 1994 .

[11]  W. K. Bodger,et al.  Aerodynamic Wind Throb in Passenger Cars , 1964 .

[12]  Chang-Fa An,et al.  Optimization Study for Sunroof Buffeting Reduction , 2006 .

[13]  Hyung-Seok Kook,et al.  Investigation of the shear flows over a sunroof opening based on a linear inviscid instability analysis , 2009 .

[14]  Seong-Ryong Shin,et al.  Measurement of the sunroof buffeting noise with an automatic deflector-traversing device , 2010 .

[15]  Tao Jiang,et al.  Numerical study of the flow-induced sunroof buffeting noise of a simplified cavity model based on the slightly compressible model , 2013 .

[16]  Zhen Chen,et al.  Numerical simulation of automobile side-window buffeting noise based on fluid–structure interaction , 2015 .

[17]  Kanwerdip Singh,et al.  Sunroof Buffeting Suppression Using a Dividing Bar , 2007 .

[18]  Hiroshi China,et al.  Analysis of Vehicle Wind Throb Using CFD and Flow Visualization , 1997 .

[19]  Hiroshi Suzuki,et al.  Smoking prevalence and attitudes toward tobacco among student and staff nurses in Niigata, Japan. , 2005, The Tohoku journal of experimental medicine.