Cubic mesoporous Pd–WO3 loaded graphitic carbon nitride (g-CN) nanohybrids: highly sensitive and temperature dependent VOC sensors

The urgent need for real-time monitoring of toxic/hazardous gases in the immediate indoor environment has attracted much attention owing to the recent advancements in the development of ultra-efficient gas sensors with increased accuracy and portability at around room temperature. In this work, we report on a high performance volatile organic compound (VOC) sensor using a Pd–WO3 loaded ordered mesoporous graphitic carbon nitride (g-CN)-based nanohybrid prepared via a nanocasting strategy on a hard 3D porous silica (KIT-6) template. The nanocasted Pd–WO3/g-CN sensor exhibits highly selective temperature dependent trace detection of important VOCs (formaldehyde, toluene, acetone and ethanol), which are commonly present in the indoor climate. The 3D cubic ordered mesoporous structure of the 2D layered g-CN in the hybrid nanodevice is very advantageous towards improving its sensing response with enhanced linearity, swift response/recovery time, selectivity, reversibility, stability with respect to various VOCs (at their respective optimum temperature) and reusability. The proposed functional hybrid nanomaterial-based sensing strategy offers an effective design for highly sensitive and efficient VOC detection devices, which can operate well at low temperatures also.

[1]  R. Adelung,et al.  Synthesis, characterization and DFT studies of zinc-doped copper oxide nanocrystals for gas sensing applications , 2016 .

[2]  TiO2 nanoparticles functionalized by Pd nanoparticles for gas-sensing application with enhanced butane response performances , 2017, Scientific Reports.

[3]  F. Gao,et al.  Fabrication of Zn2SnO4/SnO2 hollow spheres and their application in dye-sensitized solar cells , 2013 .

[4]  Vijay K. Tomer,et al.  A low temperature, highly sensitive and fast response toluene gas sensor based on In(III)-SnO2 loaded cubic mesoporous graphitic carbon nitride , 2018 .

[5]  F. Kleitz,et al.  Cubic Ia3d large mesoporous silica: synthesis and replication to platinum nanowires, carbon nanorods and carbon nanotubes. , 2003, Chemical communications.

[6]  Vijay K. Tomer,et al.  A porous, crystalline truxene-based covalent organic framework and its application in humidity sensing , 2017 .

[7]  Vijay K. Tomer,et al.  Near-Room-Temperature Ethanol Detection Using Ag-Loaded Mesoporous Carbon Nitrides , 2017, ACS omega.

[8]  Yanshuang Wang,et al.  Brookite TiO2 decorated α-Fe2O3 nanoheterostructures with rod morphologies for gas sensor application , 2014 .

[9]  Chia-Yen Lee,et al.  Formaldehyde Gas Sensors: A Review , 2013, Sensors.

[10]  Vijay K. Tomer,et al.  One pot synthesis of mesoporous ZnO–SiO2 nanocomposite as high performance humidity sensor , 2015 .

[11]  B. Grévin,et al.  Fast responding exhaled-breath sensors using WO3 hemitubes functionalized by graphene-based electronic sensitizers for diagnosis of diseases. , 2014, ACS applied materials & interfaces.

[12]  Oh Seok Kwon,et al.  WO3 nanonodule-decorated hybrid carbon nanofibers for NO2 gas sensor application , 2013 .

[13]  Harsharaj S. Jadhav,et al.  Yolk-shelled ZnCo2O4 microspheres: Surface properties and gas sensing application , 2018 .

[14]  F. Bordwell,et al.  Acidities and homolytic bond dissociation energies of the αC—H bonds in ketones in DMSO , 1990 .

[15]  Vijay K. Tomer,et al.  Humidity‐Sensing Properties of Ag0 Nanoparticles Supported on WO3‐SiO2 with Super Rapid Response and Excellent Stability , 2015 .

[16]  Vijay K. Tomer,et al.  In-situ synthesis of SnO2/SBA-15 hybrid nanocomposite as highly efficient humidity sensor , 2015 .

[17]  Xiaoping Dong,et al.  Recent development in exfoliated two-dimensional g-C3N4 nanosheets for photocatalytic applications , 2015 .

[18]  Wei Liu,et al.  Synthesis of Au decorated SnO2 mesoporous spheres with enhanced gas sensing performance , 2013 .

[19]  S. Gangopadhyay,et al.  Synthesis of Monometallic (Au and Pd) and Bimetallic (AuPd) Nanoparticles Using Carbon Nitride (C3N4) Quantum Dots via the Photochemical Route for Nitrophenol Reduction. , 2016, Langmuir : the ACS journal of surfaces and colloids.

[20]  Yogendra Kumar Mishra,et al.  ZnO tetrapod materials for functional applications , 2017, Materials Today.

[21]  A. Konno,et al.  Effect of formaldehyde on the expression of adhesion molecules in nasal microvascular endothelial cells: the role of formaldehyde in the pathogenesis of sick building syndrome , 2002, Clinical and experimental allergy : journal of the British Society for Allergy and Clinical Immunology.

[22]  Rajan Jose,et al.  Multiporous nanofibers of SnO2 by electrospinning for high efficiency dye-sensitized solar cells , 2014 .

[23]  Yunpei Zhu,et al.  Mesoporous Phosphorus-Doped g-C3N4 Nanostructured Flowers with Superior Photocatalytic Hydrogen Evolution Performance. , 2015, ACS applied materials & interfaces.

[24]  Vijay K. Tomer,et al.  Mesoporous Materials and Their Nanocomposites , 2016 .

[25]  Siang-Piao Chai,et al.  Graphitic Carbon Nitride (g-C3N4)-Based Photocatalysts for Artificial Photosynthesis and Environmental Remediation: Are We a Step Closer To Achieving Sustainability? , 2016, Chemical reviews.

[26]  Vijay K. Tomer,et al.  Retracted: Ordered Mesoporous Ag–ZnO@g‐CN Nanohybrid as Highly Efficient Bifunctional Sensing Material , 2018 .

[27]  K. Wilson,et al.  The influence of surface functionalization of activated carbon on palladium dispersion and catalytic activity in hydrogen oxidation , 2008 .

[28]  Yun-Dong Wu,et al.  Substituent Effects on the C-H Bond Dissociation Energy of Toluene. A Density Functional Study. , 1996, The Journal of organic chemistry.

[29]  Sen Xin,et al.  Electrocatalytic performances of g-C3N4-LaNiO3 composite as bi-functional catalysts for lithium-oxygen batteries , 2016, Scientific Reports.

[30]  Vijay K. Tomer,et al.  Ordered mesoporous In-(TiO2/WO3) nanohybrid: An ultrasensitive n-butanol sensor , 2017 .

[31]  Tetsuya Kida,et al.  Effect of water vapor on Pd-loaded SnO2 nanoparticles gas sensor. , 2015, ACS applied materials & interfaces.

[32]  Huajie Huang,et al.  Palladium nanoparticles supported on graphitic carbon nitride-modified reduced graphene oxide as highly efficient catalysts for formic acid and methanol electrooxidation , 2014 .

[33]  Vijay K. Tomer,et al.  Effect of in-situ loading of nano titania particles on structural ordering of mesoporous SBA-15 framework , 2015 .

[34]  Vijay K. Tomer,et al.  Facile Synthesis of Hybridized Mesoporous Au@TiO2/SnO2 as Efficient Photocatalyst and Selective VOC Sensor , 2016 .

[35]  Qin Hao,et al.  Controllable synthesis and enhanced gas sensing properties of a single-crystalline WO3–rGO porous nanocomposite , 2017 .

[36]  Piyong Zhang,et al.  Improving the photocatalytic hydrogen production of Ag/g-C3N4 nanocomposites by dye-sensitization under visible light irradiation. , 2016, Nanoscale.

[37]  Vijay K. Tomer,et al.  Rapid acetone detection using indium loaded WO3/SnO2 nanohybrid sensor , 2017 .

[38]  M. Antonietti,et al.  Highly selective hydrogenation of phenol and derivatives over a Pd@carbon nitride catalyst in aqueous media. , 2011, Journal of the American Chemical Society.

[39]  Prabhakar Rai,et al.  Role of Pd nanoparticles in gas sensing behaviour of Pd@In2O3 yolk–shell nanoreactors , 2016 .

[40]  Hui Song,et al.  Palladium-decorated hydrogen-gas sensors using periodically aligned graphene nanoribbons. , 2014, ACS applied materials & interfaces.

[41]  Yu Wang,et al.  WO3 nanorods/graphene nanocomposites for high-efficiency visible-light-driven photocatalysis and NO2 gas sensing , 2012 .

[42]  Heqing Gong,et al.  Ionic liquid-assisted synthesis of WO3 particles with enhanced gas sensing properties , 2013 .

[43]  Ying Zhang,et al.  Atomic structure-dominated enhancement of acetone sensing for a ZnO nanoplate with highly exposed (0001) facet , 2017 .

[44]  R. K. Mishra,et al.  Nanocube In2O3@RGO heterostructure based gas sensor for acetone and formaldehyde detection , 2017 .

[45]  Peder Wolkoff,et al.  Organic compounds in indoor air—their relevance for perceived indoor air quality? , 2001 .

[46]  Vijay K. Tomer,et al.  Highly sensitive and selective volatile organic amine (VOA) sensors using mesoporous WO3–SnO2 nanohybrids , 2016 .

[47]  Vijay K. Tomer,et al.  A Novel Highly Sensitive Humidity Sensor Based on ZnO/SBA-15 Hybrid Nanocomposite , 2015 .

[48]  Yuxin Yang,et al.  Preparation and enhanced visible-light photocatalytic activity of silver deposited graphitic carbon nitride plasmonic photocatalyst , 2013 .

[49]  T. Zhai,et al.  Two-dimensional layered nanomaterials for gas-sensing applications , 2016 .

[50]  Vijay K. Tomer,et al.  Ordered mesoporous Ag-doped TiO2/SnO2 nanocomposite based highly sensitive and selective VOC sensors , 2016 .

[51]  Chao Liu,et al.  Synthesis of TiO2 decorated Co3O4 acicular nanowire arrays and their application as an ethanol sensor , 2015 .

[52]  Vijay K. Tomer,et al.  Cubic mesoporous Ag@CN: a high performance humidity sensor. , 2016, Nanoscale.

[53]  Vijay K. Tomer,et al.  An excellent humidity sensor based on In–SnO2 loaded mesoporous graphitic carbon nitride , 2017 .

[54]  G. Shao,et al.  Microwave-assisted growth of In2O3 nanoparticles on WO3 nanoplates to improve H2S-sensing performance , 2014 .

[55]  W. Benecke,et al.  Direct Growth of Freestanding ZnO Tetrapod Networks for Multifunctional Applications in Photocatalysis, UV Photodetection, and Gas Sensing. , 2015, ACS applied materials & interfaces.

[56]  Vijay K. Tomer,et al.  Mesoporous Silica: Making “Sense” of Sensors , 2014 .