Oxidation behavior of Sn–Zn solders under high-temperature and high-humidity conditions
暂无分享,去创建一个
[1] Y. C. Chan,et al. Effect of substrate metallization on interfacial reactions and reliability of Sn-Zn-Bi solder joints , 2007 .
[2] K. Suganuma,et al. Sn–Zn low temperature solder , 2006 .
[3] Seung-Boo Jung,et al. Interfacial reactions and shear strength on Cu and electrolytic Au/Ni metallization with Sn-Zn solder , 2006 .
[4] Sinn-wen Chen,et al. Phase equilibria of the Sn–Zn–Cu ternary system , 2006 .
[5] Jenn-Ming Song,et al. Variable eutectic temperature caused by inhomogeneous solute distribution in Sn¿Zn system , 2006 .
[6] Yangshan Sun,et al. Properties of low melting point Sn–Zn–Bi solders , 2005 .
[7] Kwang-Lung Lin,et al. Microstructure and mechanical properties of low Ga content Sn–8.55Zn–0.5Ag–0.1Al–xGa solders , 2005 .
[8] Kwang-Lung Lin,et al. Microstructure and Mechanical Properties of Sn-8.55Zn-1Ag-XAl Solder Alloys , 2005 .
[9] Haoran Ma,et al. Microstructural evolution of Sn–9Zn–3Bi solder/Cu joint during long-term aging at 170 °C , 2004 .
[10] Jun-Mo Yang,et al. Analysis on interfacial reactions between Sn–Zn solders and the Au/Ni electrolytic-plated Cu pad , 2004 .
[11] Min-Hsiung Hon,et al. Enhancement of the wettability and solder joint reliability at the Sn–9Zn–0.5Ag lead-free solder alloy–Cu interface by Ag precoating , 2003 .
[12] Li-Hui Chen,et al. Microstructure and tensile properties of Sn–9Zn–xAg lead-free solder alloys , 2003 .
[13] Katsuaki Suganuma,et al. Effect of composition and cooling rate on microstructure and tensile properties of Sn–Zn–Bi alloys , 2003 .
[14] K. Suganuma,et al. Microstructure Changes in Sn-Zn/Cu Joints During Heat-Exposure , 2002 .
[15] Semyon Vaynman,et al. Flux development for lead-free solders containing zinc , 2000 .
[16] Kwang-Lung Lin,et al. Wetting interaction of Pb-free Sn-Zn-Al solders on metal plated substrate , 1998 .
[17] Koichi Niihara,et al. Wetting and interface microstructure between Sn–Zn binary alloys and Cu , 1998 .
[18] Huifen. Chen,et al. New lead-free, Sn-Zn-In solder alloys , 1994 .
[19] M. Mccormack,et al. Progress in the design of new lead-free solder alloys , 1993 .
[20] S. Mrowec,et al. Defects and Diffusion in Solids: An Introduction , 1979 .
[21] R. Winston Revie,et al. Corrosion and corrosion control : an introduction to corrosion science and engineering , 2008 .
[22] Katsuaki Suganuma,et al. Effects of Bi and Pb on oxidation in humidity for low-temperature lead-free solder systems , 2006 .
[23] K. Suganuma. Advances in lead-free electronics soldering , 2001 .
[24] Lawrence H. Bennett,et al. Binary alloy phase diagrams , 1986 .