Enhancement in free cooling potential through PCM based storage system integrated with direct evaporative cooling (DEC) unit

Abstract The present work reports the enhancement in free cooling potential using a modified cooling system compared to the conventional free cooling system. The proposed modified system is a novel pilot scale model packed with spherically encapsulated phase change material in a cylindrical tank along with water spray nozzles (direct evaporative cooling unit) at the inlet of the tank. The experiments were conducted in Bangalore, a city located in south India that possesses moderate/temperate climate throughout the year. Considering the local ambient conditions, an organic phase change material with the phase transition temperature range of 25.6–27.1 °C was used in the present study. Significant reduction in total charging duration and enhancement in heat transfer rate was achieved through the hybrid cooling system. The reduction in charging duration of 28.7% and 34.8% was observed for the proposed hybrid cooling system at heat transfer fluid (HTF) inlet velocities of 2 and 1.5 m/s respectively. It is observed from the results that in the experiments conducted with conventional free cooling system at 1 m/s HTF velocity, the phase change material (PCM) placed in the last two rows of the storage tank did not reach its end freezing temperature even after 10 h of experimentation due to the low heat transfer rate, whereas in the experiments conducted with the modified free cooling system, the storage tank is completely charged at all HTF velocities. It is construed from the results that the integration of evaporative cooling unit along with phase change material based free cooling system aids the chosen phase change material to completely solidify at a faster rate and augments the thermal performance of the storage unit. The proposed system can be operated as a single stand-alone cooling system to meet the cooling demand of the buildings or it can be integrated with the mechanically operated HVAC systems to achieve energy efficiency in the overall cooling system.

[1]  Ephraim M Sparrow,et al.  Experiments on the Role of Natural Convection in the Melting of Solids , 1978 .

[2]  R. Velraj,et al.  Analysis of the heat transfer mechanisms during energy storage in a Phase Change Material filled vertical finned cylindrical unit for free cooling application , 2013 .

[3]  U. Stritih.  An experimental study of enhanced heat transfer in rectangular PCM thermal storage , 2004 .

[4]  Sarit K. Das,et al.  The effect of carbon nanotubes in enhancing the thermal transport properties of PCM during solidification , 2012 .

[5]  R. Velraj,et al.  Review on free cooling of buildings using phase change materials , 2010 .

[6]  Mohammad-Iman Alizadeh,et al.  Development of free cooling based ventilation technology for buildings: Thermal energy storage (TES) unit, performance enhancement techniques and design considerations – A review , 2016 .

[7]  S. C. Solanki,et al.  An analysis of a packed bed latent heat thermal energy storage system using PCM capsules: Numerical investigation , 2009 .

[8]  Sašo Medved,et al.  Free cooling of a building using PCM heat storage integrated into the ventilation system , 2007 .

[9]  L. Cabeza,et al.  Natural convection heat transfer coefficients in phase change material (PCM) modules with external vertical fins , 2008 .

[10]  R. Velraj,et al.  Heat transfer and pressure drop studies on a PCM-heat exchanger module for free cooling applications , 2011 .

[11]  Nasrudin Abd Rahim,et al.  Review of PCM based cooling technologies for buildings , 2012 .

[12]  Mervyn Smyth,et al.  A comparison of heat transfer enhancement in a medium temperature thermal energy storage heat exchanger using fins , 2009 .

[13]  Zia Ud Din,et al.  Phase change material (PCM) storage for free cooling of buildings—A review , 2013 .

[14]  U. Stritih,et al.  Experimental investigation of energy saving in buildings with PCM cold storage , 2010 .

[15]  Ramalingam Velraj,et al.  Sub cooling of PCM due to various effects during solidification in a vertical concentric tube thermal storage unit , 2013 .

[16]  Shuli Liu,et al.  Numerical study on the performance of an air—Multiple PCMs unit for free cooling and ventilation , 2017 .

[17]  C. A. Infante Ferreira,et al.  Energy and exergy evaluation of a multiple-PCM thermal storage unit for free cooling applications , 2014 .

[18]  Farah Souayfane,et al.  Phase change materials (PCM) for cooling applications in buildings: A review , 2016 .

[19]  Sašo Medved,et al.  Generalized model-based predictive weather control for the control of free cooling by enhanced night-time ventilation , 2016 .

[20]  L. Cabeza,et al.  Free-cooling of buildings with phase change materials , 2004 .

[21]  Sašo Medved,et al.  Efficiency of free cooling using latent heat storage integrated into the ventilation system of a low energy building , 2007 .

[22]  K. Panchabikesan,et al.  Passive cooling potential in buildings under various climatic conditions in India , 2017 .

[23]  Saeed Kamali,et al.  Review of free cooling system using phase change material for building , 2014 .

[24]  Lixian Sun,et al.  Thermal conductivity enhancement of Ag nanowires on an organic phase change material , 2010 .

[25]  Karthik Panchabikesan,et al.  Review on phase change material based free cooling of buildings—The way toward sustainability , 2015 .

[26]  Sean N. Murray,et al.  Free-cooling thermal energy storage using phase change materials in an evaporative cooling system , 2013 .

[27]  S. Ajib,et al.  Novel cooling unit using PCM for residential application , 2012 .

[28]  Karthik Panchabikesan,et al.  Experimental investigation of free cooling using phase change material-filled air heat exchanger for energy efficiency in buildings , 2018 .

[29]  R. Velraj,et al.  Heat transfer enhancement in a latent heat storage system , 1999 .

[30]  M. Tong,et al.  Experimental study of thermal conductivity and phase change performance of nanofluids PCMs , 2009 .

[31]  Sašo Medved,et al.  Correlation between the local climate and the free-cooling potential of latent heat storage , 2008 .

[32]  K. Ismail,et al.  Numerical and experimental study on the solidification of PCM around a vertical axially finned isothermal cylinder , 2001 .

[33]  R. Velraj,et al.  Effect of fill volume on solidification characteristics of DI (deionized) water in a spherical capsule – An experimental study , 2015 .