A Modified PBC Controller Using Dynamic Damping Injection for LCL-Filtered Grid-Tied Inverter with Zero Steady State Error

The Passivity-Based Control (PBC) has been adopted in LCL-filtered Grid-Tied Inverters (GTI). However, the inaccurate mathematic model of control object will lead to a steady state error, when using the conventional PBC controller. In this paper, a modified PBC controller by using Dynamic Damping Injection (DDI) for LCL-filtered GTI is proposed to eliminate the steady state error. Furthermore, the state observer is used to reduce the number of sensors. A simulation platform is built in MATLAB/Simulink, and a 3-kW experimental device is developed with the control hardware of dSPACE DS1202 to verify the correctness and effectiveness of proposed control method.

[1]  Frede Blaabjerg,et al.  Combining Passivity-Based Control with Active Damping to Improve Stability of LCL Filtered Grid-Connected Voltage Source Inverter , 2018, 2018 IEEE International Power Electronics and Application Conference and Exposition (PEAC).

[2]  Thomas M. Jahns,et al.  Observer-Based Active Damping of $LCL$ Resonance in Grid-Connected Voltage Source Converters , 2014 .

[3]  Hasan Komurcugil Improved passivity-based control method and its robustness analysis for single-phase uninterruptible power supply inverters , 2015 .

[4]  Zhiheng Zhang,et al.  Principle and Robust Impedance-Based Design of Grid-tied Inverter with LLCL-Filter under Wide Variation of Grid-Reactance , 2019, IEEE Transactions on Power Electronics.

[5]  Xianggen Yin,et al.  Passivity-based control of cascaded multilevel converter based D-STATCOM integrated with distribution transformer , 2018 .

[6]  Marko Hinkkanen,et al.  Observer-Based State-Space Current Control for a Three-Phase Grid-Connected Converter Equipped With an LCL Filter , 2014, IEEE Transactions on Industry Applications.

[7]  Frede Blaabjerg,et al.  An Efficient and Robust Hybrid Damper for $LCL$- or $LLCL$-Based Grid-Tied Inverter With Strong Grid-Side Harmonic Voltage Effect Rejection , 2016, IEEE Transactions on Industrial Electronics.

[8]  Xinbo Ruan,et al.  Capacitor-Current-Feedback Active Damping With Reduced Computation Delay for Improving Robustness of LCL-Type Grid-Connected Inverter , 2014, IEEE Transactions on Power Electronics.

[9]  Frede Blaabjerg,et al.  Damping Methods for Resonances Caused by LCL-Filter-Based Current-Controlled Grid-Tied Power Inverters: An Overview , 2017, IEEE Transactions on Industrial Electronics.

[10]  Frede Blaabjerg,et al.  Overview of Control and Grid Synchronization for Distributed Power Generation Systems , 2006, IEEE Transactions on Industrial Electronics.

[11]  F. Blaabjerg,et al.  An LLCL Power Filter for Single-Phase Grid-Tied Inverter , 2012, IEEE Transactions on Power Electronics.

[12]  Huai Wang,et al.  A Robust Passive Damping Method for LLCL-Filter-Based Grid-Tied Inverters to Minimize the Effect of Grid Harmonic Voltages , 2014, IEEE Transactions on Power Electronics.

[13]  Frede Blaabjerg,et al.  A Modified Multifrequency Passivity-Based Control for Shunt Active Power Filter With Model-Parameter-Adaptive Capability , 2018, IEEE Transactions on Industrial Electronics.

[14]  Friedrich W. Fuchs,et al.  Interconnection and damping assignment passivity-based current control of grid-connected PWM converter with LCL-filter , 2010, Proceedings of 14th International Power Electronics and Motion Control Conference EPE-PEMC 2010.