Review on life cycle inventory: methods, examples and applications

Life cycle inventory (LCI) is the crucial phase of Life cycle assessment (LCA) which deals with the quantification and accumulation of a system inputs and outputs data. The three main currently available LCI methods are: Process based modeling, Input output (IO) LCI and Hybrid method. Different studies in literature adopt different methods of LCI. In contrast, different methods may provide different environmental impact results for the same product. Therefore, which LCI method should be chosen is highly important during conducting LCA studies. In order to choose a particular LCI method, one should know the calculation technique, relative advantages and limitations for the intended purpose. However, the knowledge about these methods and their application is split over various studies in literature. In this paper, a review on LCI evolution and their various methodological developments are presented along with numerical examples, advantages, disadvantages and application. This study is useful for choosing and applying an appropriate LCI method. It enables further exploration of advanced topic such as LCA software and extended LCA application like: Life cycle costing, Sustainability assessment, Green supply chain, Green product design and so on.

[1]  Raymond R. Tan,et al.  A fuzzy linear programming extension of the general matrix-based life cycle model , 2008 .

[2]  R. Heijungs.  Sensitivity coefficients for matrix-based LCA , 2010 .

[3]  Adisa Azapagic,et al.  Life cycle assessment and linear programming environmental optimisation of product system , 1995 .

[4]  Manfred Lenzen,et al.  Error propagation methods for LCA—a comparison , 2014, The International Journal of Life Cycle Assessment.

[5]  John Barrett,et al.  The carbon payback of micro-generation: An integrated hybrid input–output approach , 2014 .

[6]  Robert Ries,et al.  Shale-to-well energy use and air pollutant emissions of shale gas production in China , 2014 .

[7]  A. Tukker,et al.  Environmental Impacts of Products:Policy Relevant Information and Data Challenges , 2006 .

[8]  Anna Björklund,et al.  Life cycle assessment as an analytical tool in strategic environmental assessment. Lessons learned from a case study on municipal energy planning in Sweden , 2012 .

[9]  Jovan Jovanovic,et al.  Cleaner production aspects of tablet coating process in pharmaceutical industry: problem of VOCs emission , 2013 .

[10]  Reinout Heijungs,et al.  A review of approaches to treat uncertainty in LCA , 2004 .

[11]  Chris Hendrickson,et al.  Environmental Life Cycle Assessment of Goods and Services: An Input-Output Approach , 2006 .

[12]  M. Schulz,et al.  Red meat production in australia: life cycle assessment and comparison with overseas studies. , 2010, Environmental science & technology.

[13]  Maurizio Cellura,et al.  A Generalization of the Orthogonal Regression Technique for Life Cycle Inventory , 2012, Int. J. Agric. Environ. Inf. Syst..

[14]  廬 偉哲.  Study on the advanced technique of environmental assessment based on life cycle assessment using matrix method , 2006 .

[15]  Yuan Yao,et al.  A hybrid life-cycle inventory for multi-crystalline silicon PV module manufacturing in China , 2014 .

[16]  Hyung Chul Kim,et al.  Life cycle optimization of automobile replacement: model and application. , 2003, Environmental science & technology.

[17]  Matthew,et al.  Development of a Disaggregated Hybrid Model for Life Cycle Assessment and De-manufacturing , 2012 .

[18]  H. S. Matthews,et al.  Extending the Boundaries of Life‐Cycle Assessment through Environmental Economic Input‐Output Models , 2000 .

[19]  Gjalt Huppes,et al.  Missing inventory estimation tool using extended input-output analysis , 2002 .

[20]  Reinout Heijungs,et al.  Toward a solution of allocation in life cycle inventories: the use of least-squares techniques , 2010 .

[21]  Begoña Guezuraga,et al.  Life cycle assessment of two different 2 MW class wind turbines , 2012 .

[22]  Luigi Pelagagge,et al.  Improving the environmental performance of vegetable oil processing through LCA , 2014 .

[23]  Tao Li,et al.  Life Cycle Assessment of a Diesel Engine Based on an Integrated Hybrid Inventory Analysis Model , 2014 .

[24]  Troy R. Hawkins,et al.  Hybrid Framework for Managing Uncertainty in Life Cycle Inventories , 2009 .

[25]  Yim Ling Siu,et al.  The energy and water nexus in Chinese electricity production: A hybrid life cycle analysis , 2014 .

[26]  Véronique Chable,et al.  Life cycle assessment of bread from several alternative food networks in Europe , 2015 .

[27]  Monia Niero,et al.  Review of LCA studies of solid waste management systems--part I: lessons learned and perspectives. , 2014, Waste management.

[28]  Adisa Azapagica,et al.  Allocation of Environmental Burdens in Multiple-function Systems , 1999 .

[29]  Raymond R. Tan,et al.  Fuzzy data reconciliation in reacting and non-reacting process data for life cycle inventory analysis , 2007 .

[30]  Robert Ries,et al.  Characterizing, Propagating, and Analyzing Uncertainty in Life‐Cycle Assessment: A Survey of Quantitative Approaches , 2007 .

[31]  Min-Ho Jang,et al.  Hybrid LCA model for assessing the embodied environmental impacts of buildings in South Korea , 2015 .

[32]  Manfred Lenzen,et al.  Errors in Conventional and Input‐Output—based Life—Cycle Inventories , 2000 .

[33]  W. Leontief.  Environmental Repercussions and the Economic Structure: An Input-Output Approach , 1970 .

[34]  Yuichi Moriguchi,et al.  ANALYSING THE LIFE CYCLE IMPACTS OF CARS: THE CASE OF CO2 , 1993 .

[35]  Jun Guan,et al.  Quantification of building embodied energy in China using an input–output-based hybrid LCA model , 2016 .

[36]  Chris Yuan,et al.  A hybrid life cycle assessment of atomic layer deposition process , 2014 .

[37]  S. Joshi.  Product Environmental Life‐Cycle Assessment Using Input‐Output Techniques , 1999 .

[38]  C. Bullard,et al.  Reducing uncertainty in energy analysis , 1976 .

[39]  T. Seager,et al.  Stochastic multi-attribute analysis (SMAA) as an interpretation method for comparative life-cycle assessment (LCA) , 2014, The International Journal of Life Cycle Assessment.

[40]  R. Frischknecht,et al.  A special view on the nature of the allocation problem , 1998 .

[41]  G. Treloar.  Extracting Embodied Energy Paths from Input–Output Tables: Towards an Input–Output-based Hybrid Energy Analysis Method , 1997 .

[42]  S. Suh,et al.  Application of hybrid life cycle approaches to emerging energy technologies--the case of wind power in the UK. , 2011, Environmental science & technology.

[43]  Maurizio Cellura,et al.  Life Cycle Assessment (LCA) of protected crops: an Italian case study , 2012 .

[44]  Hugo Hens,et al.  Life Cycle Optimization of Extremely Low Energy Dwellings , 2007 .

[45]  Fabio Menten,et al.  A review of LCA greenhouse gas emissions results for advanced biofuels: The use of meta-regression analysis , 2013 .

[46]  Daniel Müller,et al.  Addressing sustainability in the aluminum industry: a critical review of life cycle assessments , 2012 .

[47]  Robert Ries,et al.  The embodied air pollutant emissions and water footprints of buildings in China: a quantification using disaggregated input–output life cycle inventory model , 2016 .

[48]  Justin Kitzes,et al.  An Introduction to Environmentally-Extended Input-Output Analysis , 2013 .

[49]  Jacqueline M. Bloemhof-Ruwaard,et al.  An environmental life cycle optimization model for the European pulp and paper industry , 1996 .

[50]  Prem K. Goel,et al.  Revisiting least squares techniques for the purposes of allocation in life cycle inventory , 2014, The International Journal of Life Cycle Assessment.

[51]  Hwong-Wen Ma,et al.  Improving the integrated hybrid LCA in the upstream scope 3 emissions inventory analysis , 2012, The International Journal of Life Cycle Assessment.

[52]  Clark W. Bullard,et al.  Net energy analysis : handbook for combining process and input-output analysis , 1976 .

[53]  Allison M. Leach,et al.  The nitrogen footprint of food products and general consumption patterns in Austria , 2014 .

[54]  Edgar G. Hertwich,et al.  Approaches to correct for double counting in tiered hybrid life cycle inventories , 2009 .

[55]  Jiří Jaromír Klemeš,et al.  The environmental bill of material and technology routing: an integrated LCA approach , 2010 .

[56]  Raymond R. Tan,et al.  A Hybrid Life Cycle Optimization Model for Different Microalgae Cultivation Systems , 2014 .

[57]  Robert J. Korbach,et al.  A regional interindustry environmental model , 1973 .

[58]  Gjalt Huppes,et al.  Methods for Life Cycle Inventory of a product , 2005 .

[59]  John Barrett,et al.  Identification of 'carbon hot-spots' and quantification of GHG intensities in the biodiesel supply chain using hybrid LCA and structural path analysis. , 2011, Environmental science & technology.

[60]  Robert Ries,et al.  Estimating Construction Project Environmental Effects Using an Input-Output-Based Hybrid Life-Cycle Assessment Model , 2008 .

[61]  David Pennington,et al.  Recent developments in Life Cycle Assessment. , 2009, Journal of environmental management.

[62]  Walter D. Fisher.  Criteria for Aggregation in Input-Output Analysis , 1958 .

[63]  Peter E.D. Love,et al.  Using national input/output data for embodied energy analysis of individual residential buildings , 2001 .

[64]  R. Crawford.  Validation of a hybrid life-cycle inventory analysis method. , 2008, Journal of environmental management.

[65]  Ivan Dale U. Barilea,et al.  A fuzzy multi-regional input–output optimization model for biomass production and trade under resource and footprint constraints , 2012 .

[66]  Edgar G. Hertwich,et al.  A comment on "Functions, commodities and environmental impacts in an ecological-economic model" , 2006 .

[67]  Runze Huang,et al.  The energy, water, and air pollution implications of tapping China's shale gas reserves , 2014 .

[68]  Fengqi You,et al.  Life Cycle Optimization of Biomass-to-Liquid Supply Chains with Distributed–Centralized Processing Networks , 2011 .

[69]  Salvatore Miranda,et al.  Life Cycle Assessment of Apple Powders Produced by a Drum Drying Process , 2015 .

[70]  Arpad Horvath,et al.  Economic Input–Output Models for Environmental Life-Cycle Assessment , 1998 .

[71]  Sangwon Suh,et al.  Functions, commodities and environmental impacts in an ecological–economic model , 2004 .

[72]  Jan Oosterhaven,et al.  Specification and Aggregation Errors in Environmentally Extended Input–Output Models , 2013 .

[73]  Olivier Jolliet,et al.  Combining Material Flow Analysis, Life Cycle Assessment, and Multiattribute Utility Theory , 2013 .

[74]  Reinout Heijungs,et al.  A generic method for the identification of options for cleaner products , 1994 .

[75]  Tao Li,et al.  Life Cycle Assessment of an Engine with Input-Output Based Hybrid Analysis Method , 2014 .

[76]  M. Lenzen,et al.  The path exchange method for hybrid LCA. , 2009, Environmental science & technology.

[77]  Xavier Gabarrell,et al.  Combined application of LCA and eco-design for the sustainable production of wood boxes for wine bottles storage , 2011 .

[78]  Takeo Shiina,et al.  A review of life cycle assessment (LCA) on some food products. , 2009 .

[79]  Nathan B. Cruze.  Addressing Allocation and Disparity in Methods of Life Cycle Inventory , 2013 .

[80]  Noe Vargas Hernandez,et al.  Development of an expert system to aid engineers in the selection of design for environment methods and tools , 2012, Expert Syst. Appl..

[81]  Arpad Horvath,et al.  Life-Cycle Environmental Effects of an Office Building , 2003 .

[82]  Edgar G. Hertwich,et al.  Ecological footprint of nations: Comparison of process analysis, and standard and hybrid multiregional input–output analysis , 2014 .

[83]  L. Macaskie,et al.  Microbially-enhanced chemisorption of heavy metals : A method for the bioremediation of solutions containing long-lived isotopes of neptunium and plutonium , 1998 .

[84]  C. Hendrickson,et al.  Using input-output analysis to estimate economy-wide discharges , 1995 .

[85]  Sangwon Suh,et al.  Reply: Downstream cut-offs in integrated hybrid life-cycle assessment , 2006 .

[86]  Yong Geng,et al.  Evaluating the water footprint of the energy supply of Liaoning Province, China: A regional input–output analysis approach , 2015 .

[87]  David Hunkeler,et al.  Environmental life-cycle costing: a code of practice , 2011 .

[88]  S. Vinodh,et al.  Application of life cycle assessment and Monte Carlo simulation for enabling sustainable product design , 2014 .

[89]  Ren Wang,et al.  Application of robust optimization in matrix-based LCI for decision making under uncertainty , 2014, The International Journal of Life Cycle Assessment.

[90]  Reinout Heijungs,et al.  Theoretical exploration for the combination of the ecological, energy, carbon, and water footprints: Overview of a footprint family , 2014 .