论文信息 - Optimization of the biped robot trajectory

Optimization of the biped robot trajectory

The optimization of the biped walking trajectory is treated so that it can be used as a reference trajectory for control. The biped is modeled as a kinetic chain of 13 links connected by 12 joints. The inverse kinematics of the biped is derived for the specified positions of the body and feet. The objective is to optimize the location of the zero moment point (ZMP), which is the virtual total ground reaction point. Specifically, the authors minimize the deviation between the ZMP and the center of shape of the supporting area by treating the position of the body as free variables. A simulation of an optimal biped trajectory is presented to illustrate the proposed approach.<<ETX>>

[1] D. Jacobson,et al. Studies of human locomotion via optimal programming , 1971 .

[2] G. Saridis,et al. Legged Locomotion Robots and Anthropomorphic Mechanisms: by M. Vukobratovic. Mihailo Pupin Institute, Belgrade, 1975, 346 pp. $23. , 1976 .

[3] Toru Yamaguchi,et al. Realization of a high speed biped using modern control theory , 1984 .

[4] I. Shimoyama,et al. Dynamic Walk of a Biped , 1984 .

[5] John J. Craig,et al. Introduction to Robotics Mechanics and Control , 1986 .

[6] Marc H. Raibert,et al. Legged Robots That Balance , 1986, IEEE Expert.

[7] Akihito Sano,et al. Sensor-Based Control of a Nine-Link Biped , 1990, Int. J. Robotics Res..

[8] Tad McGeer,et al. Passive Dynamic Walking , 1990, Int. J. Robotics Res..

[9] Y. Z. Li,et al. Trajectory synthesis and physical admissibility for a biped robot during the single-support phase , 1990, Proceedings., IEEE International Conference on Robotics and Automation.

[10] William A. Gruver,et al. Fuzzy logic force control for a biped robot , 1991, Proceedings of the 1991 IEEE International Symposium on Intelligent Control.