An Integrated Model for Predicting Engine Friction Losses in Internal Combustion Engines

A comprehensive computer model (EFLP) has been developed for carrying out friction estimation and analysis of sparks ignited in reciprocating engines. EFLP considers five major loss components in an automotive engine: the crankshaft, piston, valvetrain, auxiliary components and pumping losses. Hydrodynamic, mixed, and boundary layer regimes are used to model the friction phenomena. The main building blocks of EFLP are empirical engine friction models based on experimental data. EFLP is constructed using MATAB-based engine code for estimating engine performance. The friction in a 4-cylinder 4-stroke engine is inspected. The results predicted by EFLP were validated according to a case study available in the literature. The validation showed that EFLP predictions are realistic and accurate.

[1]  M. Rahman,et al.  Characterization of the time-averaged overall heat transfer in a direct-injection hydrogen-fueled engine , 2013 .

[2]  Rosli Abu Bakar,et al.  Effects of Air-Fuel Ratio and Engine Speed on Performance of Hydrogen Fueled Port Injection Engine , 2009 .

[3]  Rosli Abu Bakar,et al.  Heat transfer analysis inside exhaust port for a hydrogen fueled port injection engine , 2012 .

[4]  Abul Kalam Azad,et al.  A Comprehensive Study of Di Diesel Engine PerformanceWithvegetable Oil: An Alternative Bio-Fuel Source ofEnergy , 2012 .

[5]  Rosli A. Bakar,et al.  Effects of Air Fuel Ratio and Injection Timing on Performance for Four-Cylinder Direct Injection Hydrogen Fueled Engine , 2009 .

[6]  T. Masuda,et al.  Development of a friction prediction model for high performance engines , 1991 .

[7]  I. Bishop.  Effect of Design Variables on Friction and Economy , 1964 .

[8]  M. RahmanM.,et al.  Integrated Simulation Model for Composition and Properties of Gases in Hydrogen Fueled Engine , 2013 .

[9]  John B. Heywood,et al.  Development and Evaluation of a Friction Model for Spark-Ignition Engines , 1989 .

[10]  P. K. Goenka,et al.  FLARE: An Integrated Software Package for Friction and Lubrication Analysis of Automotive Engines - Part I: Overview and Applications , 1992 .

[11]  M. RahmanM.,et al.  Performance Evaluation of External Mixture Formation Strategy in Hydrogen-Fueled Engine , 2011 .

[12]  Md. Mustafizur Rahman,et al.  Engine performance and optimum injection timing for 4-cylinder direct injection hydrogen fueled engine , 2011, Simul. Model. Pract. Theory.

[13]  Gordon P. Blair,et al.  Design and Simulation of Four-Stroke Engines , 1999 .

[14]  Rosli Abu Bakar,et al.  Effect of mixture strength and injection timing on combustion characteristics of a direct injection hydrogen-fueled engine , 2013 .

[15]  Mohd Hafizil Mat Yasin,et al.  INFLUENCE OF PALM METHYL ESTER (PME) AS AN ALTERNATIVE FUEL IN MULTICYLINDER DIESEL ENGINE , 2012 .

[16]  T. Mang,et al.  Lubricants and Lubrication , 2006 .

[17]  Masahiko Nakada,et al.  Trends in engine technology and tribology , 1994 .

[18]  Willard W. Pulkrabek,et al.  Engineering Fundamentals of the Internal Combustion Engine, 2nd Ed. , 2004 .

[19]  John B. Heywood,et al.  An Improved Friction Model for Spark-Ignition Engines , 2003 .

[20]  Khalaf I. Hamada,et al.  Time-averaged heat transfer correlation for direct injection hydrogen fueled engine , 2012 .

[21]  N. Kapilan,et al.  Improvement of Performance of Dual Fuel Engine Operated at Part Load , 2010 .

[22]  Rohit S. Paranjpe,et al.  FLARE: An Integrated Software Package for Friction and Lubrication Analysis of Automotive Engines - Part II: Experimental Validation , 1992 .

[23]  Rosli Abu Bakar,et al.  Air Fuel Ratio on Engine Performance and Instantaneous Behavior of Crank Angle for Four Cylinder Direct Injection Hydrogen Fueled Engine , 2009 .

[24]  John B. Heywood,et al.  Internal combustion engine fundamentals , 1988 .

[25]  R. Mamat,et al.  Influence of Fuel Temperature on a Diesel Engine Performance Operating with Biodiesel Blended , 2012 .

[26]  B. Bhushan,et al.  Introduction to Tribology , 2002 .

[27]  Chi-Chuan Wang,et al.  Sensible heat and friction characteristics of plate fin-and-tube heat exchangers having plane fins , 1996 .

[28]  Mahmudur Rahman,et al.  Heat transfer of intake port for hydrogen fueled port injection engine: A steady state approach , 2011 .

[29]  Khalaf I. Hamada,et al.  Parametric Study Of Instantaneous Heat Transfer Based on Multidimensional Model in Direct-Injection Hydrogen-Fueled Engine , 2013 .