Sensitivity analysis applied to finite element method model for coupled multiphase system

SUMMARY Today multiphysics problems applied to various fields of engineering have become increasingly important. Among these, in the areas of civil, environmental and nuclear engineering, the problems related to the behaviour of porous media under extreme conditions in terms of temperature and/or pressure are particularly relevant. The mathematical models used to solve these problems have an increasing complexity leading to increase of computing times. This problem can be solved by using more effective numerical algorithms, or by trying to reduce the complexity of these models. This can be achieved by using a sensitivity analysis to determine the influence of model parameters on the solution. In this paper, the sensitivity analysis of a mathematical/numerical model for the analysis of concrete as multiphase porous medium exposed to high temperatures is presented. This may lead to a reduction of the number of the model parameters, indicating what parameters should be determined in an accurate way and what can be neglected or found directly from the literature. Moreover, the identification parameters influence may allow to proceeding to a simplification of the mathematical model (i.e. model reduction). The technique adopted in this paper to performing the sensitivity analysis is based on the automatic differentiation (AD), which allowed to develop an efficient tool for the computation of the sensitivity coefficients. The results of the application of AD technique have been compared with the results of the more standard finite difference method, showing the superiority of the AD in terms of numerical accuracy and execution times. From the results of the sensitivity analysis, it follows that a drastic simplification of the model for thermo-chemo-hygro-mechanical behaviour of concrete at high temperature, is not possible. Therefore, it is necessary to use different model reduction techniques in order to obtain a simplified version of the model that can be used at industrial level. Copyright © 2012 John Wiley & Sons, Ltd.

[1]  Saltelli Andrea,et al.  Global Sensitivity Analysis: The Primer , 2008 .

[2]  B. Scholz.  Application of a micropolar model to the localization phenomena in granular materials : general model, sensitivity analysis and parameter optimization , 2007 .

[3]  Bibiana Luccioni,et al.  Thermo-mechanic model for concrete exposed to elevated temperatures , 2003 .

[4]  Bernhard A. Schrefler,et al.  Numerical analysis of hygro-thermal behaviour and damage of concrete at high temperature , 1999 .

[5]  David Elizondo,et al.  Automatic versus manual model differentiation to compute sensitivities and solve non-linear inverse problems , 2002 .

[6]  A. Paquier,et al.  Automatic sensitivity analysis of a finite volume model for two-dimensional shallow water flows , 2007 .

[7]  G. Charles.  Automatic differentiation and iterative processes , 1992 .

[8]  Laurent Hascoët,et al.  Adjoints of large simulation codes through Automatic Differentiation , 2008 .

[9]  Bernhard A. Schrefler,et al.  Modelling of hygro-thermal behaviour of concrete at high temperature with thermo-chemical and mechanical material degradation , 2003 .

[10]  Kyung K. Choi,et al.  Design sensitivity analysis of non‐linear structural systems part I: Theory , 1987 .

[11]  B. Schrefler,et al.  The Finite Element Method in the Static and Dynamic Deformation and Consolidation of Porous Media , 1998 .

[12]  Pierre Kalifa,et al.  High-temperature behaviour of HPC with polypropylene fibres: From spalling to microstructure , 2001 .

[13]  Z. Bažant,et al.  Concrete at High Temperatures: Material Properties and Mathematical Models , 1996 .

[14]  Bernard Schrefler,et al.  Towards prediction of the thermal spalling risk through a multi-phase porous media model of concrete , 2006 .

[15]  Olivier Pironneau,et al.  Automatic differentiation in C++ using expression templates and. application to a flow control problem , 2001 .

[16]  Ulrich Schneider,et al.  Concrete at High Temperatures -- A General Review* , 1988 .

[17]  Bernhard A. Schrefler,et al.  Simulation of damage-permeability coupling in hygro-thermo mechanical analysis of concrete at high temperature , 2002 .

[18]  J. Z. Zhu,et al.  The finite element method , 1977 .

[19]  B. Schrefler,et al.  Multiphase flow in deforming porous material , 2004 .

[20]  C. Bischof,et al.  Derivative convergence for iterative equation solvers , 1993 .

[21]  Bernhard A. Schrefler,et al.  Modelling of hygro‐thermal behaviour and damage of concrete at temperature above the critical point of water , 2002 .

[22]  Bernhard A. Schrefler,et al.  Concrete at high temperature with application to tunnel fire , 2002 .

[23]  Gilles Pijaudier-Cabot,et al.  CONTINUUM DAMAGE THEORY - APPLICATION TO CONCRETE , 1989 .

[24]  Bernard Schrefler,et al.  Modelling creep and shrinkage of concrete by means of effective stresses , 2007 .

[25]  Andreas Griewank,et al.  Evaluating derivatives - principles and techniques of algorithmic differentiation, Second Edition , 2000, Frontiers in applied mathematics.

[26]  Harvey M. Wagner,et al.  Global Sensitivity Analysis , 1995, Oper. Res..

[27]  Laurent Hascoët,et al.  TAPENADE 2.1 user's guide , 2004 .