A simple and cost-effective method for fabrication of integrated electronic-microfluidic devices using a laser-patterned PDMS layer

We report a simple and cost-effective method for fabricating integrated electronic-microfluidic devices with multilayer configurations. A CO2 laser plotter was employed to directly write patterns on a transferred polydimethylsiloxane (PDMS) layer, which served as both a bonding and a working layer. The integration of electronics in microfluidic devices was achieved by an alignment bonding of top and bottom electrode-patterned substrates fabricated with conventional lithography, sputtering and lift-off techniques. Processes of the developed fabrication method were illustrated. Major issues associated with this method as PDMS surface treatment and characterization, thickness-control of the transferred PDMS layer, and laser parameters optimization were discussed, along with the examination and testing of bonding with two representative materials (glass and silicon). The capability of this method was further demonstrated by fabricating a microfluidic chip with sputter-coated electrodes on the top and bottom substrates. The device functioning as a microparticle focusing and trapping chip was experimentally verified. It is confirmed that the proposed method has many advantages, including simple and fast fabrication process, low cost, easy integration of electronics, strong bonding strength, chemical and biological compatibility, etc.

[1]  R. Zare,et al.  Construction of microfluidic chips using polydimethylsiloxane for adhesive bonding. , 2005, Lab on a chip.

[2]  K. Jensen,et al.  Cells on chips , 2006, Nature.

[3]  M. Stelzle,et al.  Microdevices for manipulation and accumulation of micro‐ and nanoparticles by dielectrophoresis , 2003, Electrophoresis.

[4]  M. Schmidt.  Wafer-to-wafer bonding for microstructure formation , 1998, Proc. IEEE.

[5]  Ronald Pethig.  Publisher’s Note: “Review Article—Dielectrophoresis: Status of the theory, technology, and applications” [Biomicrofluidics 4, 022811 (2010)] , 2010 .

[6]  Hongkai Wu,et al.  Fabrication of complex three-dimensional microchannel systems in PDMS. , 2003, Journal of the American Chemical Society.

[7]  Subramanian S. Iyer,et al.  Silicon Wafer Bonding Technology for VLSI and MEMS Applications , 2002 .

[8]  Hiroaki Misawa,et al.  Fabrication and characteristic responses of integrated microelectrodes in polymer channel chip , 2000 .

[9]  Femtosecond laser integration for biophotonic applications — A “magic brush” in the micro/nano-world , 2008, 2008 Asia Optical Fiber Communication & Optoelectronic Exposition & Conference.

[10]  Hai-Qing Gong,et al.  Templateless prototyping of polydimethylsiloxane microfluidic structures using a pulsed CO2 laser , 2009 .

[11]  Marin Alexe,et al.  Wafer bonding : applications and technology , 2004 .

[12]  G. Whitesides,et al.  Fabrication of microfluidic systems in poly(dimethylsiloxane) , 2000, Electrophoresis.

[13]  S. Quake,et al.  From micro- to nanofabrication with soft materials. , 2000, Science.

[14]  Limu Wang,et al.  A simple method for fabricating multi-layer PDMS structures for 3D microfluidic chips. , 2010, Lab on a chip.

[15]  Shizhi Qian,et al.  DC electrokinetic particle transport in an L-shaped microchannel. , 2010, Langmuir : the ACS journal of surfaces and colloids.

[16]  Douglas Ray Sparks,et al.  Wafer-to-wafer bonding of nonplanarized MEMS surfaces using solder , 2001 .

[17]  Bruce K. Gale,et al.  Determining the optimal PDMS–PDMS bonding technique for microfluidic devices , 2008 .

[18]  J. Rossier,et al.  UV Laser Machined Polymer Substrates for the Development of Microdiagnostic Systems. , 1997, Analytical chemistry.

[19]  G. Whitesides.  The origins and the future of microfluidics , 2006, Nature.

[20]  Yuejun Kang,et al.  Electrokinetic motion of particles and cells in microchannels , 2009 .

[21]  Hsueh-Chia Chang,et al.  An integrated dielectrophoretic chip for continuous bioparticle filtering, focusing, sorting, trapping, and detecting. , 2007, Biomicrofluidics.

[22]  Koji Sugioka,et al.  Microfluidic laser embedded in glass by three-dimensional femtosecond laser microprocessing. , 2004, Optics letters.

[23]  C. Shu,et al.  Numerical modeling of dielectrophoresis using a meshless approach , 2005 .

[24]  Hejun Du,et al.  A 3D paired microelectrode array for accumulation and separation of microparticles , 2006 .

[25]  Dawn J. Bennett,et al.  A semi-analytical approach using artificial neural network for dielectrophoresis generated by parallel electrodes , 2010 .

[26]  D. J. Harrison,et al.  Capillary electrophoresis and sample injection systems integrated on a planar glass chip , 1992 .

[27]  R. Pethig.  Review article-dielectrophoresis: status of the theory, technology, and applications. , 2010, Biomicrofluidics.

[28]  R. Horowitz,et al.  Batch micropackaging by compression-bonded wafer-wafer transfer , 1999, Technical Digest. IEEE International MEMS 99 Conference. Twelfth IEEE International Conference on Micro Electro Mechanical Systems (Cat. No.99CH36291).

[29]  Saeid Nahavandi,et al.  Dielectrophoretic platforms for bio-microfluidic systems. , 2011, Biosensors & bioelectronics.

[30]  S. Soper,et al.  Micromachining in plastics using X-ray lithography for the fabrication of microelectrophoresis devices. , 1999, Journal of biomechanical engineering.

[31]  J. Troe,et al.  Modeling of velocity and surface temperature of the moving interface during laser ablation of polyimide and poly(methyl methacrylate) , 1999 .

[32]  Detlef Snakenborg,et al.  Microstructure fabrication with a CO2 laser system , 2004 .

[33]  S. Kalams,et al.  DC-Dielectrophoretic separation of biological cells by size , 2008, Biomedical microdevices.

[34]  U. Gösele,et al.  SemiConductor Wafer Bonding: Science and Technology , 1998 .

[35]  G. Kovacs.  Micromachined Transducers Sourcebook , 1998 .

[36]  J. Michael Ramsey,et al.  Effects of injection schemes and column geometry on the performance of microchip electrophoresis devices , 1994 .

[37]  G. Whitesides,et al.  Soft Lithography. , 1998, Angewandte Chemie.

[38]  Adrien Plecis,et al.  Fabrication of microfluidic devices based on glass-PDMS-glass technology , 2007 .