Three-phase (β + β′ + γ′) NiAlTi(Cr,Fe) alloys for high temperature use

[1]  K. Ishida,et al.  Ductility enhancement in NiAl (B2)-base alloys by microstructural control , 1991 .

[2]  R. Cahn,et al.  A microstructural study of a Ni_2AlTi–Ni(Al, Ti)–Ni_3(Al, Ti) three-phase alloy , 1991 .

[3]  I. Baker,et al.  Room temperature deformation behavior of multiphase Ni20at.%Al30at.%Fe and its constituent phases , 1991 .

[4]  R. Field,et al.  Microscopy and tensile behavior of melt-spun Ni-Al-Fe alloys , 1990 .

[5]  M. Durand-Charre,et al.  The nickel-rich corner of the Ni-Al-Ti system , 1990 .

[6]  J. Whittenberger,et al.  Compressive strength of a B2 matrix NiAlNb intermetallic at 1200 and 1300 K , 1989 .

[7]  J. Whittenberger,et al.  1200 to 1400 K slow strain rate compressive behavior of small grain size NiAl/Ni_2AlTi alloys and NiAl/Ni_2AlTi–TiB_2 composites , 1989 .

[8]  Robert M. McMeeking,et al.  On the toughness of brittle materials reinforced with a ductile phase , 1988 .

[9]  S. Schuon,et al.  The Effect of Boron on the Microstructure of Ni 2 AITi. , 1988 .

[10]  P. S. Khadkikar,et al.  Two—Phase Nickel Aurunides , 1986 .

[11]  P. Nash,et al.  Phase equilibria in the Ni-Al-Ti system at 1173 k , 1985 .

[12]  C. M. Wayman,et al.  Ni5Al3 and the nickel-aluminum binary phase diagram , 1984 .

[13]  P. Nash,et al.  The Al-Ni-Ti (Aluminum-Nickel-Titanium) system , 1982 .

[14]  R. Mosković.  Mechanical properties of precipitation-strengthened Ni-Al-Cr alloy based on an NiAl intermetallic compound , 1978 .

[15]  P. Strutt,et al.  High temperature creep in a semi-coherent NiAl-Ni2AlTi alloy , 1976 .

[16]  P. Strutt,et al.  Creep behavior of the heusler type structure alloy Ni2AlTi , 1976 .

[17]  L. Kaufman,et al.  Calculation of superalloy phase diagrams: Part II , 1974, Metallurgical and Materials Transactions B.

[18]  K. C. Russell.  Nucleation of voids in irradiated metals. II. The general case , 1972 .