Effect of addition of 1,6-hexanediamine on thermal properties and crystallization behaviors of biobased PA10T polyamides

[1]  Guisheng Yang,et al.  Non-isothermal crystallization kinetics of graphene/PA10T composites , 2022, Heliyon.

[2]  Zhikun Zheng,et al.  Synthesis and thermal degradation mechanism of a semi-aromatic copolyamide from renewable sources , 2022, Polymer Degradation and Stability.

[3]  Jie Yang,et al.  Improved interfacial shear strength in carbon fiber enhanced semi-aromatic polyamide 6T composite via in-situ polymerization on fiber surface , 2022, Composites Science and Technology.

[4]  F. Grün,et al.  Evaluation and consideration of local specimen material properties in lifetime prediction of short fiber‐reinforced PA6T/6I , 2022, Fatigue & Fracture of Engineering Materials & Structures.

[5]  J. Ji,et al.  Simultaneous enhancement of mechanical performance and thermal conductivity for polyamide 10T by nanodiamond compositing , 2021, Journal of Applied Polymer Science.

[6]  Jie Yang,et al.  In situ polymerization preparation and mechanical properties of nanocomposites based on PA10T/10I-block-PEG copolymer and graphene oxide , 2021, Nano Materials Science.

[7]  W. Acree,et al.  Further analysis and comments regarding solubility and thermodynamic analysis of 1,6-Hexanediamine in mono-solvents and 1-butanol + cyclohexane mixed solvents at different temperatures , 2021, Journal of Molecular Liquids.

[8]  Wei Zhang,et al.  High‐performances biobased semi‐aromatic polyamide 10T copolymerized with silicone monomers , 2021, Journal of Applied Polymer Science.

[9]  Yumin Xia,et al.  Synthesis and characterization of poly(hexamethylene terephthalate/hexamethylene oxamide) alternating copolyamide ( alt‐PA6T /62) , 2021 .

[10]  C. Qu,et al.  Improved processability of PA66‐polyimide copolymers with different polyimide contents , 2021 .

[11]  Jie Yang,et al.  Synthesis, Characterization and Non-Isothermal Crystallization Kinetics of a New Family of Poly (Ether-Block-Amide)s Based on Nylon 10T/10I , 2020, Polymers.

[12]  Jie Yang,et al.  Synthesis of poly (hexamethylene terephthalamide)-co-polycaprolactam/modified montmorillonite nanocomposites with enhanced mechanical properties and lower water absorption rate by in-situ polymerization , 2020, Journal of Polymer Research.

[13]  Yuan Hu,et al.  Halogen and halogen-free flame retarded biologically-based polyamide with markedly suppressed smoke and toxic gases releases , 2020 .

[14]  Sheng-Qing Yang,et al.  Cross-linked Polyamides Prepared through Direct Bulk Michael Addition and Polycondensation from 1,6-Hexanediamine and Methyl Acrylate , 2019, Chinese Journal of Polymer Science.

[15]  Jie Yang,et al.  Improved strength and toughness of semi-aromatic polyamide 6T-co-6(PA6T/6)/GO composites via in situ polymerization , 2019, Composites Science and Technology.

[16]  J. Ji,et al.  Effect of Aliphatic Diacid Chain Length on Properties of Semiaromatic Copolyamides Based on PA10T and Their Theoretical Study , 2019, Industrial & Engineering Chemistry Research.

[17]  D. Wong,et al.  Novel separation process design for non-phosgene dimethylhexane-1,6-dicarbamate synthesis by reacting dimethyl carbonate with 1,6-hexanediamine , 2019, Journal of the Taiwan Institute of Chemical Engineers / Elsevier.

[18]  J. Ji,et al.  Bio-based transparent polyamide 10T/10I/1012 with high performance , 2018, Journal of Applied Polymer Science.

[19]  G. Hu,et al.  Isothermal Crystallization Kinetics of Nylon 10T and Nylon 10T/1010 Copolymers: Effect of Sebacic Acid as a Third Comonomer , 2018, Journal of Wuhan University of Technology-Mater. Sci. Ed..

[20]  Dengfeng Zhou,et al.  Thermal oxidation and thermal degradation kinetics of brominated epoxy resin/Sb2O3 flame retardant PA10T/GF composites , 2018 .

[21]  Xiaolang Chen,et al.  Thermal stability and thermal degradation kinetics of short and long glass fiber reinforced PA10T composites , 2018, Polymer Engineering & Science.

[22]  K. Son,et al.  Effect of PA6T on morphology and electrical conductivity in PA66/PA6T/PPE/multiwalled carbon nanotube nanocomposites , 2018, Composites Science And Technology.

[23]  Xiaolang Chen,et al.  The effect of thermo-oxidative ageing on crystallization, dynamic and static mechanical properties of long glass fibre-reinforced polyamide 10T composites , 2018, Royal Society Open Science.

[24]  J. Ji,et al.  Synthesis and characterization of semiaromatic copolyamide 10T/1014 with high performance and flexibility , 2018, Designed monomers and polymers.

[25]  G. Hu,et al.  Synthesis, characterization and thermal decomposition kinetics of a bio-based transparent nylon 10I/10T , 2018, Designed monomers and polymers.

[26]  Wang Zhongqiang,et al.  Non-isothermal crystallization kinetics of Nylon 10T and Nylon 10T/1010 copolymers:Effect of sebacic acid as a third comonomer , 2017 .

[27]  Huiquan Li,et al.  Catalysts screening, optimization and mechanism studies of dimethylhexane-1,6-dicarbamate synthesis from 1,6-hexanediamine and dimethyl carbonate over Mn(OAc)2 catalyst , 2017 .

[28]  Jie Yang,et al.  Synthesis and Characterization of Poly(ethylene terephthalamide/hexamethylene terephthalamide) , 2012 .

[29]  L. Mathias,et al.  Eutectic melting behavior of polyamide 10,T-co-6,T and 12,T-co-6,T copolyterephthalamides , 2010 .

[30]  Jie Yang,et al.  Structures and properties of newly synthesized semi-aromatic polyamide thermoplastic elastomers , 2022, Polymer Chemistry.

[31]  Vasilios Tsanaktsis,et al.  Synthesis and characterisation of polyamides based on 2,5-furandicarboxylic acid as a sustainable building block for engineering plastics , 2022, Polymer Chemistry.

[32]  R. K. Kumar,et al.  Ultrasonic welding of GF/PA6T composites: Experimental investigation and process optimization , 2021, Materials Today: Proceedings.

[33]  R. K. Kumar,et al.  Investigation and characterization of ultrasonically welded GF/PA6T composites , 2020 .