In-the-field PID related experiences

Abstract Potential induced degradation could considerably decrease the performance of photovoltaic systems which operate at high DC voltages. Nonetheless, methodologies for dealing with it in field are not clearly yet defined. This work explains the kinetics of this phenomenon in the field and presents an assessment of its occurrence, detection and prediction in real PV installations. Measurements of the instantaneous operating voltages of the photovoltaic module as a verification routine and predictive maintenance is proposed here as a reasonable and most accurate way of analyzing the actual power losses of the photovoltaic system related to this kind of degradation, as well as detecting and predicting it. Potential induced degradation prevention and recovery have also been carried out by the application of reverse voltage during the night, showing the validity of this technique. A literature review for the PID dynamics of different kinds of photovoltaic cell technologies and development of PID test methodologies and standards is also presented.

[1]  Alessandra Colli,et al.  The Role of Sodium in Photovoltaic Devices Under High Voltage Stress: A Holistic Approach to Understand Unsolved Aspects , 2013 .

[2]  S. Kurtz,et al.  Testing and Analysis for Lifetime Prediction of Crystalline Silicon PV Modules Undergoing Degradation by System Voltage Stress , 2013, IEEE Journal of Photovoltaics.

[3]  J. Berghold,et al.  Potential Induced Degradation of Solar Cells and Panels , 2010 .

[4]  W. Herrmann,et al.  Potential-Induced Degradation - Comparison of Different Test Methods and Low Irradiance Performance Measurements , 2012 .

[5]  Paul Grunow,et al.  Potential Induced Degradation Effects on Crystalline Silicon Cells with Various Antireflective Coatings , 2012 .

[6]  Narendra S. Shiradkar,et al.  Evolution of Leakage Current Paths in MC-Si PV Modules From Leading Manufacturers Undergoing High-Voltage Bias Testing , 2014, IEEE Journal of Photovoltaics.

[7]  R. S. Sugimura,et al.  Measurement and characterization of voltage- and current-induced degradation of thin-film photovoltaic modules , 1989 .

[8]  Max B. Koentopp,et al.  Towards a PID test standard: Understanding and modeling of laboratory tests and field progression , 2015, 2015 IEEE 42nd Photovoltaic Specialist Conference (PVSC).

[9]  A. Masuda,et al.  Behavior of the potential-induced degradation of photovoltaic modules fabricated using flat mono-crystalline silicon cells with different surface orientations , 2015 .

[10]  G. Tamizhmani,et al.  Potential-Induced Degradation (PID): Incomplete Recovery of Shunt Resistance and Quantum Efficiency Losses , 2015, IEEE Journal of Photovoltaics.

[11]  Anne Labouret,et al.  Solar Photovoltaic Energy , 2010 .

[12]  Christian Hagendorf,et al.  Micro Structural Root Cause Analysis of Potential Induced Degradation in c-Si Solar Cells , 2012 .

[13]  Paul Grunow,et al.  Encapsulation Influence on the Potential Induced Degradation of Crystalline Silicon Cells with Selective Emitter Structures , 2012 .

[14]  Ryan Smith,et al.  System voltage potential-induced degradation mechanisms in PV modules and methods for test , 2011, 2011 37th IEEE Photovoltaic Specialists Conference.

[15]  Y. Hara,et al.  Consideration on Na diffusion and recovery phenomena in potential-induced degradation for crystalline Si photovoltaic modules , 2016 .

[16]  M. Koehl,et al.  Impact of rain and soiling on potential induced degradation , 2016 .

[17]  M. Fukawa,et al.  PID-Free c-Si PV Module Using Alminosilicate Chemically Strengthened Glass , 2013 .

[18]  Peter Hacke,et al.  Test-to-Failure of crystalline silicon modules , 2010, 2010 35th IEEE Photovoltaic Specialists Conference.

[19]  Benoit Braisaz,et al.  PID results at low irradiances on c-Si modules , 2014, 2014 IEEE 40th Photovoltaic Specialist Conference (PVSC).

[20]  O. Breitenstein,et al.  Explanation of potential-induced degradation of the shunting type by Na decoration of stacking faults in Si solar cells , 2014 .

[21]  P. Tsimpris,et al.  Potential Induced Degradation (PID) Diagnosis, Treatment and Module Recovery in a Grid Connected Photovoltaic (PV) Power Station in Greece , 2015 .

[22]  R. G. Ross,et al.  Environmental qualification testing of terrestrial solar cell modules , 1978 .

[23]  Daniel Wichmann,et al.  Potential-induced Degradation at Interdigitated Back Contact Solar Cells , 2014 .

[24]  Sergiu Spataru,et al.  Accelerated testing and modeling of potential-induced degradation as a function of temperature and relative humidity , 2015, 2015 IEEE 42nd Photovoltaic Specialist Conference (PVSC).

[25]  A. Masuda,et al.  Potential-induced degradation in photovoltaic modules based on n-type single crystalline Si solar cells , 2015 .

[26]  Seeram Ramakrishna,et al.  Potential-induced degradation in photovoltaic modules: a critical review , 2017 .

[27]  H. Nagel,et al.  Climate Model for Potential-Induced Degradation of Crystalline Silicon Photovoltaic Modules , 2012 .

[28]  H. Nagel,et al.  Lifetime Warranty Testing of Crystalline Silicon Modules for Potential-Induced Degradation , 2012 .

[29]  J. A. del Cueto,et al.  Analysis of leakage currents in photovoltaic modules under high‐voltage bias in the field , 2002 .

[30]  O. Breitenstein,et al.  The role of stacking faults for the formation of shunts during potential‐induced degradation of crystalline Si solar cells , 2013 .

[31]  M. Koehl,et al.  Effect of humidity and temperature on the potential‐induced degradation , 2014 .

[32]  T. Doi,et al.  Investigation on antireflection coating for high resistance to potential-induced degradation , 2013, 2013 Twentieth International Workshop on Active-Matrix Flatpanel Displays and Devices (AM-FPD).

[33]  T. J. McMahon,et al.  History of accelerated and qualification testing of terrestrial photovoltaic modules: A literature review , 2009 .

[34]  S. Pingel,et al.  Recovery Methods for Modules Affected by Potential Induced Degradation (PID) , 2012 .

[35]  P. Gumbsch,et al.  Potential-induced degradation in solar cells: Electronic structure and diffusion mechanism of sodium in stacking faults of silicon , 2014 .

[36]  J. Schneider,et al.  Influence of Polymer Properties on Potential Induced Degradation of PV-Modules , 2013 .