Kinetics of biaxial dome formation by transformation superplasticity of titanium alloys and composites

[1]  D. Dunand,et al.  Tensile Transformation‐Mismatch Plasticity of Bismuth Sesquioxide , 2004 .

[2]  K. Bowman,et al.  Mechanical Behavior of Materials , 1990 .

[3]  D. Dunand,et al.  Solid-state foaming of titanium by superplastic expansion of argon-filled pores , 2001 .

[4]  D. Dunand,et al.  Tensile fracture during transformation superplasticity of Ti–6Al–4V , 2001 .

[5]  D. Dunand,et al.  Whisker alignment of Ti–6Al–4V/TiB composites during deformation by transformation superplasticity , 2001 .

[6]  D. Dunand,et al.  Non-isothermal transformation-mismatch plasticity: Modeling and experiments on Ti-6Al-4V , 2001 .

[7]  D. Dunand,et al.  Transformation Superplasticity of Ti-6Al-4V and Ti-6Al-4V/TiC Composites at High Stresses , 2001 .

[8]  D. Dunand,et al.  Enhanced densification of metal powders by transformation-mismatch plasticity , 2000 .

[9]  D. Dunand,et al.  Contributions to transformation superplasticity of titanium from rigid particles and pressurized pores , 1999 .

[10]  D. Dunand,et al.  Transformation superplasticity of super α2 titanium aluminide , 1998 .

[11]  D. Dunand,et al.  Transformation superplasticity of zirconium , 1998 .

[12]  D. Dunand,et al.  Biaxial deformation of Ti-6Al-4V and Ti-6Al-4V/TiC composites by transformation-mismatch superplasticity , 1997 .

[13]  Jeffrey Wadsworth,et al.  Superplasticity in metals and ceramics , 1997 .

[14]  K. Funami,et al.  Superplasticity of fine TiB dispersed Ti-6Al-4V Alloy Composites obtained by Reaction Sintering , 1996 .

[15]  S. C. Lee,et al.  Superplastic forming of 7475 Al alloy by variable-pressure blowing , 1996 .

[16]  D. Dunand,et al.  Transformation-mismatch superplasticity in reinforced and unreinforced titanium , 1996 .

[17]  R. Mishra,et al.  Steady state creep behaviour of particulate-reinforced titanium matrix composites , 1996 .

[18]  W. Szkliniarz,et al.  Analysis of volume effects of phase transformation in titanium alloys , 1995 .

[19]  T. Saito.  A cost-effective P/M titanium matrix composite for automobile use , 1995 .

[20]  F. Enikeev,et al.  An analysis of the superplastic forming of a thin circular diaphragm , 1995 .

[21]  T. Nishimura,et al.  The Temperature and the Grains of Ti-6Al-4V Alloy on the Uniaxial and Biaxial Deformations for Superplasticity , 1994 .

[22]  Amiya K. Mukherjee,et al.  Superplastic forming: an analytical approach , 1992 .

[23]  Z. G. Wang,et al.  Creep behavior of TiC-particulate-reinforced Ti alloy composite , 1992 .

[24]  R. Mehrabian,et al.  Microstructure evolution in tial alloys with b additions: Conventional solidification , 1989 .

[25]  Zhengxiao Guo,et al.  Modelling of superplastic bulge forming of domes , 1989 .

[26]  Song Yuquan,et al.  A mechanical analysis of the superplastic free bulging of metal sheet , 1986 .

[27]  M. Zamora,et al.  Experiments in anisothermal transformation plasticity: The case of cobalt. Geophysical implications , 1983 .

[28]  Amit K. Ghosh,et al.  Influences of material parameters and microstructure on superplastic forming , 1982 .

[29]  O. Sherby,et al.  Enhanced densification of white cast iron powders by cyclic phase transformations under stress , 1982 .

[30]  J. Perepezko,et al.  Enhancement of plastic flow during massive transformations , 1978, Metallurgical and Materials Transactions A.

[31]  K. Nuttall.  Superplasticity in the Zr2.5% Nb alloy , 1976 .

[32]  F. Jovane,et al.  An approximate analysis of the superplastic forming of a thin circular diaphragm: Theory and experiments , 1968 .

[33]  G. W. Greenwood,et al.  The deformation of metals under small stresses during phase transformations , 1965, Proceedings of the Royal Society of London. Series A. Mathematical and Physical Sciences.

[34]  O. Sherby,et al.  Strength of iron during allotropic transformation , 1964 .

[35]  G. W. Greenwood,et al.  Deformation of Uranium During Alpha/Beta Cycles Under Small Stresses and a Quantitative Interpretation of the Mechanical Weakness of Metals Undergoing Phase Transformations , 1962, Nature.

[36]  M. D. Jong,et al.  Mechanical properties of an iron-carbon alloy during allotropic transformation☆ , 1961 .

[37]  M. Lozinsky.  Grain boundary adsorption and “superhigh plasticity” , 1961 .

[38]  W. B. Rotsey,et al.  The plastic deformation of alpha-uranium , 1960 .

[39]  M. D. Jong,et al.  Mechanical properties of iron and some iron alloys while undergoing allotropic transformation , 1959 .

[40]  Joseph R. Davis.  Properties and selection : nonferrous alloys and special-purpose materials , 1990 .

[41]  Lawrence H. Bennett,et al.  Binary alloy phase diagrams , 1986 .

[42]  A. R. Ragab,et al.  Thermoforming of superplastic sheet in shaped dies , 1983 .

[43]  C. D. Pomeroy.  Creep of engineering materials , 1978 .

[44]  R. Bradt,et al.  Transformational Plasticity in Bi2O3 , 1975 .

[45]  V. Weiss,et al.  TRANSFORMATION PLASTICITY OF TITANIUM. , 1970 .

[46]  A. Karimi,et al.  Master's Thesis , 2008 .